Tripp Lite Rackmount Network-Grade PDU Power Strip, 12 Right Angle Outlets Wide-Spaced, 15A, 15ft Cord w/ 5-15P Plug RS1215-RA

Ptripp lites rs-1215-ra power strip offers 15A capacity AC power distribution in a versatile multi-mount cabinet. Features 12 nema5-15r outlets 6 front/6 rear placed at a right angle with ground pin at bottom, 15-ft. Unfiltered electrical pass-through makes RS-1215-RA ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more.

Cord; 15A circuit breaker. Rack meeting EIA standards. 15 ft. 12 outlets 6 front/6 rear. Rackmount uses 1 rack space/1U, wallmount, under-counter and more/p 1u rackmount Power Strip. Ac power cord and lighted power switch with cover that prevents risk of accidental turn-off. Plug/outlets: input: nema 5-15poutput: 12 x nema 5-15r 6 front/6 rearelectrical: 120v ac, 50/60hz, 20A Requires NEMA 5-15R wall receptacleFORMAT: 19-in.

Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Outlets placed at right angle to accommodate bulky transformers. Designed for standard 19 inch racks. Uses only 1 rack space 1U when installed in any 19-in. Lifetime warranty.

---

6U - Wall Mount Bracket - StarTech.com 12in Deep Wall Mounting Bracket for Patch Panel

Mount networking equipment and shallow rackmount devices with this 6U wall-mountable rack. Backed by a StarTech. Com Lifetime warranty. Wall Rack Mount. Wallmount bracket / Wall Mount Bracket. Wall Server Rack. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall.

The wallmount6 6u 12in deep wall mounting bracket for Patch Panel delivers a sturdy and dependable equipment storage option, allowing you to wallmount equipment for a more efficient and accessible operating environment. Wall Mounting Bracket.


Similar products

---

Chief Raxxess UNS1 Vented Universal Rack Tray Shelf for 19" Server Racks, with Bottom Slots for Mounting Non-Rack and Half-Rack Equipment

Designed for it racks, music studio racks, and all standard 19" rack systems. Wall Rack Mount. Wallmount bracket / Wall Mount Bracket. Wall Mounting Bracket. Punched shelf bottom can be used to attach non-rack and half-rack components and promotes good ventilation. Wall Server Rack. 20 lb capacity. 1u universal shelf designed to accommodate both non-rack mount equipment and half-rack width equipment Mount networking equipment and shallow rackmount devices with this 6U wall-mountable rack.

Made from heavy 14 guage steel with ventilated bottom slots to properly secure equipment. Depth: 10" / height: 1. 75" 1u / width: 19" including mount panels with 17. 25" useable space.


Similar products

---

AC Infinity Vented Cantilever 1U Universal Rack Shelf, for 19” equipment racks. Heavy-Duty 2.4mm Cold Rolled Steel, 60lbs Capacity

20 lb capacity. Depth: 10" / height: 1. 75" 1u / width: 19" including mount panels with 17. 25" useable space. Vent design maximizes airflow and prevents hot spots, while maintaining structural integrity. Mount networking equipment and shallow rackmount devices with this 6U wall-mountable rack. Wallmount bracket / Wall Mount Bracket.

Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves. Heavy-duty 2. 4mm thick sPCC cold rolled steel construction. 1u height, washer, 105" deep, includes 10-32 screw, and cage nut set.

Punched shelf bottom can be used to attach non-rack and half-rack components and promotes good ventilation. Made from heavy 14 guage steel with ventilated bottom slots to properly secure equipment. Fits into all standard 19" racks and cabinets, and takes 1U or 1RU of space. Includes 10-32 screw, washer, and cage nut set.




Similar products

---

Tripp Lite 8U/12U/22U Expandable Wall-Mount 2-Post Open Frame Rack, Adjustable Network Equipment Rack, Switch Depth, 18" Deep SRWO8U22

Stores 19 in. Rack can assemble as an 8u, 14U or 22U all from same sku and all additional parts needed are included. Made from heavy 14 guage steel with ventilated bottom slots to properly secure equipment. Simple to assemble and mount. Wall Rack Mount. Wall Server Rack. Maximum load capacity of 150 lb. Allows easy access to equipment and cabling.

Designed for it racks, music studio racks, and all standard 19" rack systems. Deep. Wall Mounting Bracket. 20 lb capacity. Wallmount bracket / Wall Mount Bracket. Rack equipment up to 18 in. 5-year Limited Warranty. The open frame rack is a heavy duty open frame rack designed for secure, high density servers and networking applications in IT environments.

Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves. Heavy-duty 2.


Similar products

---

TP-Link 24-Port Gigabit Ethernet Unmanaged Switch | Plug and Play | Metal | Rackmount | Fanless | Limited Lifetime TL-SG1024

20 lb capacity. Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves. Heavy-duty 2. 4mm thick sPCC cold rolled steel construction. 1u height, washer, 10

5" deep, includes 10-32 screw, and cage nut set. Configures to 8u, 12U or 22U of rack space. Key features superior Performance Gigabit port, non-blocking architecture, 802. 3x flow control - featured with 24 10/100/1000mbps ports, TL-SG1024 greatly expands your network capacity, enabling instant large files transfer.

Stores 19 in. The switch automatically powers down the ports that are idle and budgets power output for different Ethernet cable lengths. Punched shelf bottom can be used to attach non-rack and half-rack components and promotes good ventilation. Furthermore, 100, auto-negotiation on each port senses the link speed of a network device-10, or 1000 Mbps-and intelligently adjusts for compatibility and optimal performance.

Moreover, with the innovative energy-efficient technology, the TL-SG1024 can save up to 40% of the power consumption. Wall Server Rack. Made from heavy 14 guage steel with ventilated bottom slots to properly secure equipment.


Similar products

---

AC Infinity Vented Cantilever 1U Universal Rack Shelf, 14" Deep, for 19" equipment racks. Heavy-Duty 2.4mm Cold Rolled Steel, 60lbs Capacity

20 lb capacity. Includes four pieces of 10-32 screws, four plastic washers, and four cage nuts. Product details the ac infinity rack shelf is designed for supporting non-rack mountable equipment such as tower computers, routers, UPS systems, and monitors. Simple to assemble and mount. Fits all 19" racks and cabinets to hold various IT, network, and AV equipment.

Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves. Heavy-duty 2. 4mm thick sPCC cold rolled steel construction. 1u height, washer, 105" deep, includes 10-32 screw, and cage nut set. Configures to 8u, 12U or 22U of rack space.

All ports support full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps. 24 10/100/1000m rj45 ports. Punched shelf bottom can be used to attach non-rack and half-rack components and promotes good ventilation. Maximum load capacity of 150 lb. Wall Server Rack. Designed for it racks, music studio racks, and all standard 19" rack systems.




Similar products

---

175lbs / 80kg - Fixed Server Rack Shelf - 1U Adjustable Mounting Depth Vented Rack Mount Shelf

Wall Server Rack. Rack equipment up to 18 in. Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves. Heavy-duty 2. 4mm thick sPCC cold rolled steel construction.

1u height, washer, 105" deep, includes 10-32 screw, and cage nut set. Configures to 8u, 12U or 22U of rack space. Wall Rack Mount. The adjshelf adjustable mounting depth Rack Mount Shelf offers a simple way to effectively organize mission critical computer hardware in your server racks and cabinets. Made from heavy 14 guage steel with ventilated bottom slots to properly secure equipment.

Allows easy access to equipment and cabling. Simple to assemble and mount. Deep. 24 10/100/1000m rj45 ports. All ports support full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps. Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity.




Similar products

---

Tripp Lite 45U 2-Post Open Frame rack, Network Equipment Rack, 800 lb. Capacity SR2POST

24 10/100/1000m rj45 ports. Key features product type smartrack detail specifications - supports 800lbs of rackmount equipment - Textured powder coat finish - Heavy Duty Aluminum construction - Numbered mounting positions - Bolt down provisions - Self squaring design - Black finish - Easy assembly - Five year repair or replacement warranty Unit Dimensions in - 84 x 20

3 x 4. 75 14 total depth with support base shipping dimensions hwD/in - 7 X 3 X 85 Shipping weight lbs - 29 Mount networking equipment and shallow rackmount devices with this 6U wall-mountable rack. Wall Mounting Bracket. Made from heavy 14 guage steel with ventilated bottom slots to properly secure equipment.

Rack equipment up to 18 in. Capacity. All ports support full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps. 5-year Limited Warranty. Designed for it racks, music studio racks, and all standard 19" rack systems. Fits all 19" racks and cabinets to hold various IT, network, and AV equipment.

Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves.


Similar products

---

NavePoint Cantilever Server Shelf Vented Shelves Rack Mount 19" 1U Black 10" 250mm deep

Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves. Heavy-duty 2. 4mm thick sPCC cold rolled steel construction. 1u height, 14" deep, includes 10-32 screw, washer, and cage nut set.

Add a sturdy adjustable mount depth shelf into almost any server rack or cabinet. All ports support full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps. Simple to assemble and mount. 2-post 45U open frame rack. Vented to reduce the possibility of overheating, these shelves will mount to any standard 19 inch rack or cabinet.

Front mount design. Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity. 60 pound weight capacity, up to 70% more than other cantilever rack shelves. Heavy-duty 2. 4mm thick sPCC cold rolled steel construction. 1u height, washer, 10




Similar products

---

Universal VESA LCD Monitor Mounting Bracket for 19in Rack or Cabinet

5-year Limited Warranty. Wall Rack Mount. Standard 19-inch rack-mountable steel case. 5-year warranty. Simple to assemble and mount. 175lbs 80kg Weight capacity. Depth: 10" / height: 1. 75" 1u / width: 19" including mount panels with 17. 25" useable space. Slotted venting. 1u server rack shelf / Adjustable Rack Mount Shelf.

Heavy-duty aluminum construction; self-squaring design. Wall Mounting Bracket. Capacity. Round threaded/numbered mounting holes; 800-lb. Made from heavy 14 guage steel with ventilated bottom slots to properly secure equipment. Dimensions: 1. 75"h x 17. 63"w x 9. 81"d. 27. 6in 700mm deep shelf. Compatible with starTech. Com 4postrackBK.

Designed for it racks, music studio racks, and all standard 19" rack systems.


Similar products