As an Amazon Associate I earn from qualifying purchases.
Poweka #ad - Upgrade size：12. 2 inch /310mm long, 4mm thick upgraded pull bar is more longger and thicker than the normal design. The normal design are usually only 3 mm thick, 105 inch long and easily deformed.
Enhanced pull bar：made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The soft pads on the back can well protect the floor from scratch. Perfect design :pull bar used for laminate, vinyl plank, tongue-and-groove, wood flooring and hardwood flooring installation.
Bullet Tools #ad - Fully felted bottom to protect your floor. Closes gaps when installing laminate and hardwood. Heavy duty 1/4" plate steel construction means this may just be the last one you buy. Black powder coat. 17 inches long.
MOONWELL #ad - Used to pull planks together of tongue and groove. Pro pull bar for vinyl plank, laminate and hardwood flooring installation. Made of manganese steel that is tough and durable. For use with a mallet. The short end is thinner than usual pull bars to fit tight spaces against a wall.
Poweka #ad - Perfect design :pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation. Non-marring: features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install.
Package includes: 1*flooring Installation Pull Bar 104 in /265mm long. Fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
WorkPro #ad - The double-faced solid PVC head delivers a softened, positive strike. The approximate size of the spacer 2-3/8 x 1-1/8 inch. The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. Solid tapping block: the tapping block made from polypropylene is designed solid, which is more sturdy and durable.
The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch. The whole mallet is 10-3/4 inch long and weighs 1. 036lb. The soft pads on the back can well protect the floor from scratch.
Enhanced pull bar: made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The mallet head is 1-3/8 inch in diameter. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots.
CRAIN #ad - Unique designed Boxed "Knuckle-Shaped" Hammering Head. Can be used on hardwood flooring, Laminate Flooring & Vinyl Plank Flooring.
POWERTEC #ad - Includes: 1 flooring pull Bar 16-1/4” long. Heavy duty: built with a thick 7/32”, premium steel construction and possesses an attractive powder coating protective finish.
Flange specs: the pair of precision formed lips are measured at 5/8” high to fit between the wall or end of the board and 1-5/16” high to strike with a mallet. Function: commonly used for laminate, tongue-and-groove, or wood flooring, this installation tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
REXBETI #ad - Package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers. It is professional use for laminate or hardwood flooring installation. Tapping block is made from solid polypropylene material, it is durable for long use, suitable for most types of floors.
Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 1 3/8 inch in diameterother brands usually is 1"that can provide more powerful force.
Upgraded pull bar is designed with enhanced strength, more longger and thicker than others. Others are usually only 1/8 inch thick, 10 1/2 inch long and easily deformed. Ours is 3/16 inch thick, 12 inch long is heavy duty. 2 soft pads on the back help to prevent scratching your floor during installation. 40 spacers included to allow you install a large flooring area more convenient and easier.
Big Max Tool Works #ad - P> backed by 47 years of experience in manufacturing floor installation tools. P>. P> long lasting and durable. P>. P> prevents marring of the edges of the planks. P>. P> applicable to all types of Tongue and Groove flooring. P>. P> felt pads to protect floor finish. P>.
1. Poweka
#adHeavy Duty Pull bar for Vinyl Plank Flooring and Laminate Wood Flooring Installation Tool,12.2 inch Long
#adEnhanced pull bar：made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The soft pads on the back can well protect the floor from scratch. Perfect design :pull bar used for laminate, vinyl plank, tongue-and-groove, wood flooring and hardwood flooring installation.
More information #ad
Fit for：suitable for 027in 7mm - 06in 15mm laminate or hardwood flooring. Good fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.| Brand | Poweka #ad |
| Manufacturer | Poweka #ad |
More information #ad
2. Bullet Tools
#adBullet Tools, 712HD Professional Heavy Duty Pull Bar and Pry Bar for Hard Flooring Installation
#adMore information #ad
| Brand | Bullet Tools #ad |
| Manufacturer | bullet tools #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | 712HD |
| Model | 712HD |
| Warranty | 30-Day Satisfaction Guarantee |
More information #ad
3. MOONWELL
#adMOONWELL Pull Bar for Laminate Plank and Wood Flooring Installation 13 inch
#adMore information #ad
| Brand | MOONWELL #ad |
| Manufacturer | MOONWELL #ad |
| Height | 1.38 Inches |
| Length | 12.99 Inches |
| Width | 1.97 Inches |
| Part Number | TH008 |
More information #ad
4. Poweka
#adVinyl Plank Flooring and Wood Flooring Installation Tool（10.4in 10.4inch, 265mm Pull Bar for Laminate Plank, 1
#adPackage includes: 1*flooring Installation Pull Bar 104 in /265mm long. Fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
More information #ad
Built with a thick 079in, premium steel construction and possesses an attractive powder coating protective finish. Specs: the pair of precision formed lips are measured at 039in high to fit between the wall or end of the board and 09in high to strike with a mallet.| Brand | Poweka #ad |
| Manufacturer | Poweka #ad |
| Part Number | pk |
More information #ad
5. Norske
#adNorske Tools NMAP007 Heavy Duty Pull and Pry Bar for Laminate and Hardwood flooring installation
#adNorske #ad - Solid steel construction, built tough for heavy duty use. Item package weight: 4. 3 pounds. Designed to close gaps and seams in hardwood, engineered and laminated floors without causing damage. Package height: 5. 5 inches.More information #ad
| Brand | Norske #ad |
| Manufacturer | Norske Tools Ltd #ad |
| Weight | 4.3 Pounds |
| Part Number | NMAP007 |
| Model | NMAP007 |
More information #ad
6. WorkPro
#adTapping Block and 30-Piece Spacers Included, Heavy Duty Pull Bar, WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet
#adThe approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch. The whole mallet is 10-3/4 inch long and weighs 1. 036lb. The soft pads on the back can well protect the floor from scratch.
More information #ad
You are always welcomed to contact us for warranty service whenever there is any problem with the product. The handle is made of American hickory which is lightweight but tough. Reinforced mallet: constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS. Enhanced pull bar: made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The mallet head is 1-3/8 inch in diameter. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots.
| Brand | WorkPro #ad |
| Manufacturer | HANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad |
More information #ad
7. CRAIN
#adCrain Knucklehead Pull Bar
#adMore information #ad
3/16" heavy gauge Steel Design. 3" wide design protects flooring / 14 1/2" Length Of Working Room When Used Near The Wall. Felt pads on its Underside To Prevent Scratching.| Brand | CRAIN #ad |
| Manufacturer | CRAIN #ad |
| Height | 0.04 Inches |
| Length | 15.75 Inches |
| Width | 2.76 Inches |
| Part Number | No 560 |
| Model | No 560 |
More information #ad
8. POWERTEC
#adPOWERTEC 71479 Pro Pull Bar for Laminate Flooring
#adFlange specs: the pair of precision formed lips are measured at 5/8” high to fit between the wall or end of the board and 1-5/16” high to strike with a mallet. Function: commonly used for laminate, tongue-and-groove, or wood flooring, this installation tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
More information #ad
Non-marring: features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1.8 Inches |
| Length | 16.7 Inches |
| Width | 3.25 Inches |
| Part Number | 71479 |
| Model | 71479 |
More information #ad
9. REXBETI
#adTapping Block, REXBETI 43-Piece Laminate Wood Flooring Installation Kit with 40 Spacers, Non Slip Soft Grip, Heavy Duty Pull Bar and Diameter 1 3/8" High-Strength Fiberglass Handle Mallet
#adDouble-faced solid rubber head delivers a softened, positive strike. The mallet head is 1 3/8 inch in diameterother brands usually is 1"that can provide more powerful force.
More information #ad
The handle is made of fiberglass will not break, fell apart and handle bent. The whole mallet is 11 inch long and weighs 089lb. High-strength mallet with non-slip rubber grip help absorb vibration. Upgraded pull bar is designed with enhanced strength, more longger and thicker than others. Others are usually only 1/8 inch thick, 10 1/2 inch long and easily deformed. Ours is 3/16 inch thick, 12 inch long is heavy duty. 2 soft pads on the back help to prevent scratching your floor during installation. 40 spacers included to allow you install a large flooring area more convenient and easier.
| Brand | REXBETI #ad |
| Manufacturer | REXBETI #ad |
| Part Number | REX0909 |
| Model | EN-CF |
More information #ad
10. Big Max Tool Works
#adBig Max Pro Pull Bar w- Square Striking Head, USA Carpentry Tool w- 47 Years’ Experience! A Must Have Flooring Pull Bar for Hardwood, Vinyl Plank, and All Brands of Laminate Flooring
#adMore information #ad
| Brand | Big Max Tool Works #ad |
| Manufacturer | Big Max Tool Works #ad |
| Height | 1.75 Inches |
| Length | 12.5 Inches |
| Weight | 2 Pounds |
| Width | 3 Inches |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
