As an Amazon Associate I earn from qualifying purchases.

1. Moore & Wright

#ad

Moore and Wright, 75mm/3 inch Engineers Square

#ad
Moore & Wright #ad - 75mm/ 3" precision ground blade and 49mm/ 2" stock. Item package dimension: 5. 0" l x 1. 0" w x 4. 0" h. Blind rivetted construction made from hardened and tempered blades. Item package Weight: 1. 0 lb.
BrandMoore & Wright #ad
ManufacturerMoore and Wright #ad
Height4 Inches
Length5 Inches
Weight0.4 Pounds
Width1 Inches
Part NumberMAW4003
ModelMAW4003

2. Moore & Wright

#ad

100mm Grade, Moore & Wright MAW4004 Engineers Squares

#ad
Moore & Wright #ad - 4004 engineers square Grade B 100mm 4in. 4004 engineers square Grade B 100mm 4in. 4004 engineers square Grade B 100mm 4in.
BrandMoore & Wright #ad
ManufacturerMoore & Wright #ad
Height6.4 Inches
Length0.8 Inches
Weight0.65 Pounds
Width4.1 Inches
Part NumberMAW4004
ModelMAW4004

3. Kinex Measuring

#ad

Kinex 4001-03-100 Machinist Knife Edge Solid Inspection Square 4 x 2-3/4 x .240 Inches Thick 100 mm x 70 mm DIN 875/00 Square w/in 3 microns or 0.0001 Inches

#ad
Kinex Measuring #ad - Wide enough to stand on its edge on its own. Machined from a solid blank of tool steel will never go out of square. Made by Kinex Measuring. Overall size: 4" x 2-3/4" x 0240". Adheres to strict german din 875/00 accuracy standards- squareness guaranteed to w/in 3 microns or 00001” that's one ten thousandth of an inch! .
BrandKinex Measuring #ad
ManufacturerKinex Measuring #ad
Weight0.26 Pounds
Part Number4001-03-100
Model4001-03-100

4. Swanson Tool Co., Inc

#ad

Swanson Tool Co S0101 7 Inch Speed Square

#ad
Swanson Tool Co., Inc #ad - Includes pocket-sized swanson Blue Book, a comprehensive guide to help workers make correct angle cuts for any pitched roof. Gradations included for marking common, valley, hip, and jack rafters; Useful for determining and marking angles and making square cuts on boards.

Features: 1/4-in spaced scribing notches and the Diamond cutout for easy rafter seat cuts and scribing the most common and popular stud widths. The speed square, made in the usa since 1925, construction professional, is essential for every carpenter, roofer, and DIYer. Speed square belongs on every tradesman's tool bench; includes Try Square, Miter Square, saw guide, line scriber, and protractor.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool #ad
Height8 Inches
Length1 Inches
Weight0.5 Pounds
Width8 Inches
Part NumberS0101
ModelS0101
WarrantyAs Labeled

5. Swanson Tool Co., Inc

#ad

Stainless Steel Ruler and Brass Bolt, Swanson Tool Co TC130 6-Inch Combo Square with Cast Zinc Body

#ad
Swanson Tool Co., Inc #ad - 6 in stainless steel blade features precision-etched black gradations, includes brass hardware. Durable die-cast zinc body for durability. Spring-loaded bolt holds blade in place for firm, accurate settings. Multi-tool: square, scriber, height gauge, depth gauge, plumb level, and level. Impact-resistant acrylic vial in handle.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool #ad
Height0.63 Inches
Length3.5 Inches
Weight0.39 Pounds
Width6 Inches
Part NumberTC130
ModelTC130
WarrantySwanson Tool Co., Inc. warrants its products to be free from defects in material and workmanship for 1 year from the date of the original purchase. Swanson's only liability under this limited warranty shall be at their option to repair or replace any product determined by Swanson to be defective. No damages or other remedies available.

6. Boomgood

#ad

Machinist Square Set Engineer 90 Right Angle Precision Ground Hardened Steel Angle Ruler 200x125mm

#ad
Boomgood #ad - Squares are true right angles both inside and outside. Designed for precision layout and measurement work;Precision: DIN 875 Grade 1. Beams and blades are ground and lapped for parallelism. Length of blade is measured from corner edge of beam to end of blades. Included protective case.
BrandBoomgood #ad
ManufacturerBoomgood #ad
Part NumberBM0907

7. Groz

#ad

Groz 4-inch Machinist Steel Square | 16 Micron Squareness | #01002

#ad
Groz #ad - There is a groove on the inner corner of the stock to add in clearance of burr or dirt. 4" steel blade with 000063" squareness. 12 month warranty. Square has accurate right angles both inside and outside. Hardened spring steel blades are permanently fixed to the stock by means of tapered self locking rivets which ensure complete rigidity.
BrandGroz #ad
ManufacturerGroz #ad
Height7.48 Inches
Length4.45 Inches
Weight0.3 Pounds
Width2.95 Inches
Part Number1002
Model1002

8. Swanson Tool Co., Inc

#ad

Swanson Tool Co SW1201K Value Pack 7 inch Speed Square and Big 12 Speed Square without layout bar ships with Blue Book

#ad
Swanson Tool Co., Inc #ad - Multiple gradations: gradations included for marking common, hip, Valley, and jack rafters. Features: get more bang for your buck with this value pack of two of our best selling speed squares.

Clearly identifiable scale: High-visibility, black gradations with a non-glare, matte finish for easy reading in any lighting conditions. Useful for determining and marking angles and making square cuts on boards. Durable material: heavy-gauge billet aluminum alloy construction is die-cast for increased accuracy versus laser-etched and extruded stamped rafter squares. Easy to use: when used as a saw guide, the speed square makes truing up a board easy.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool Company, Inc #ad
Height1 Inches
Length12 Inches
Width12 Inches
Part NumberSW1201K
ModelSW1201K

9. Tulead

#ad

Tulead Machinist Square Mini Square Carbon Steel Engineer Square Woodworkers Square L-Shape Precision Machinist 63x40mm

#ad
Tulead #ad - Made of high quality carbon steel, more durable, sturdy. Bevel angle:30°;right angle, the measurement data is more accurate. The chassis is thicken, erect and stable, not easy to tilt, easy to measure each right angle. Size:63x40mm/2. 5"x1. 6"l*w. Package content:1 x Machinist Mini Square.
BrandTulead #ad
ManufacturerTulead #ad
Part NumberADD10151315