As an Amazon Associate I earn from qualifying purchases.
1. Asieg Tool #ad
Square 14mm Carbide Inserts Cutters Knives Replacement 14x14x2mm 6 Inches Radius with Screws for Grizzly T21348 and Woodworking Spiral Helical Planer Head 10pcs #adAsieg Tool #ad
- This replacement carbide inserts are designed to fit popular wood working system Cutter Headfor surfacing/planing cutterhead, groovers, helical head，and lathe Turning Tool Tipped.
Made of tungsten carbide, more endurable, for long time using，Carbide cutter Corners are very sharp with virtually no radius Best choice for turning straight profiles. 10pcs carbide inserts and Screws packed with a plastic container for safe and easy storage.
Standard size: 14 x 14 x 2mm -r150, 4-indexable cutting edge, 30° Cutting bevel, polished to a mirror finish for smoother cutting and longer tool life. Most convenient-if one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time. And all are of the same sharpness.
2. Asieg Tool #ad
14mm Carbide Inserts Cutters Knives Replacement Square Straight 14 x 14 x 2mm with Screws for Grizzly T21348 and Woodworking Spiral Helical Planer Head 10pcs #adAsieg Tool #ad
- Most convenient-if one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time. And all are of the same sharpness. Easy to operate, each blade has 4 sharp edges, if one is dull, just change it to the other side.
10 pieces, packed with a plastic container for safe and easy storage. Standard size-14mmlengthx14mmwidthX2. 0mmthickness square straight with 4 edges, 30 degree cutting angle. Carbide cutters corners are very sharp with virtually no radius Best choice for turning straight profiles and nearly 90° inside corners.
3. Asieg Tool #ad
14mm Standard Square Straight Tungsten Carbide Replacement Cutter Inserts Knives 14mm x 14 x 2mm for Grizzly T21348 and Woodworking Spiral Helical Planer Head and DIY Wood Lathe Turning Tools 10pcs #adAsieg Tool #ad
- Standard size-14mmlengthx14mmwidthX2. 0mmthickness square straight with 4 edges, 30 degree cutting angle. Most convenient-if one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time. And all are of the same sharpness.
Carbide cutter corners are very sharp with virtually no radius Best choice for turning straight profiles and nearly 90° inside corners. 10 pieces per box, packed with a plastic container for safe and easy storage. Easy to operate, each blade has 4 sharp edges, if one is dull, just change it to the other side.
4. JTEX #ad
10 Pack, 14mm Carbide Square Cutter Insert 14x14x2mm 30 degree Replacement Knives for Grizzly T21348 Spiral heads and Woodworking Spiral Helical Planer Head, all 4 Sides #adJTEX #ad
- Spiraled stagger tooth to break up chips for dust collection, Shear to give clean cutting action, Inexpensive 4 sided replaceable carbide, Shear on each knife for true helical cut, Clearance between knives for chip flow, Helix to assist the chip flow, Unbelievably quiet.
The plane a nail or staple, it is not necessary to replace knives the full length of your planer head.
The 4 cutting edges have the 30 degree corners are chamfered. 14mm carbide cutter insert 14mm x 14mm x 2mm -30* Cutting angle Replacements Knives. Rotate or replace the two or three small knives that were affected. Package a box 10PCS Knives. Easy to change the cutting edge or replace.
5. Grizzly #ad
20-Inch, Grizzly G1033X 5 HP Spiral Cutter Head Planer #adGrizzly #ad
- Motor and cutter head have ball bearings which are shielded and lubricated for life. Heavy-duty cast iron construction. 2-speed automatic feed gives you better control for rough and finish planning.
Anti-kickback fingers prevent the board from accidentally backing up. Table is precision-ground to a mirror-like finish.
6. Jet #ad
JET JWP-13BT, 120V 1PH 722130, 13-Inch Helical-Style Benchtop Planer #adJet #ad
- Powerful motor: 2-hp 15-amp motor turns the cutter head at 10, 000 RPM. Smooth cuts: helical-style cutter head, with easy-to-change blades, provides a clean cuts. Maximum efficiency: dual infeed speed control for either 18 fpm or 26 fpm, maximizes cut efficiency on different wood material types.
Reduced snipe: precision machined cast iron bed and steel cover assists in keeping boards flat. Four post design: for maximum control and support of cutter head in reference to work piece and cast table.
7. DEWALT #ad
DEWALT Thickness Planer, 13-Inch DW735X, Two Speed #adDEWALT #ad
- Three knife cutter head of the thickness planer delivers 30% longer knife life and makes knife change faster and easier. Material removal gauge and extra large thickness scale deliver accurate cuts with every pass.
Two-speed gear box of the wood planer allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. Extra large turret depth-stop allows users to return to most frequently used thicknesses with ease.
Includes infeed and outfeed tables and an extra set of knives. Stand is not included. Purchase includes one stationary 13" planer, in/out feed tables with fasteners attached to the base of the Planer base, extra blades and dust hose adapter.
Fan-assisted chip ejection vacuums chip off of the cutter head and exhausts them out of the machine. 19-3/4-inch cast aluminum base is 2 times more rigid than a standard 10-inch base and folding tables. Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user.
|Warranty||3 Year Limited|
8. Jet #ad
3HP, 12-Inch Helical Head Planer/Jointer, 230V 1PH 708476, JET JJP-12HH #adJet #ad
- Accuracy: large handwheel for quick and precise adjustments of planer table. Consistent power: Powerful 3-HP induction motor. Strength and durability: Heavy-duty cast iron and steel construction.
Superior finish and quieter cut: Helical cutterhead with 56 indexable carbide inserts. Stability: heavy-duty, one-piece steel closed stand includes mounting tabs.
9. WEN #ad
WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer #adWEN #ad
- Plane boards up to 6 inches thick and 13 inches wide. 15a motor generates 10, 000 RPM at a 26 feet per minute feed rate. Spiral cutterhead utilizes 26 staggered and rotatable HSS blades for a clean, smooth finish. Onboard material removal gauge informs users about the cutting depth of each pass.