Top 9 Drillmate Portable Multi-Angle Drill Guide with 3/8 In. Chuck – Power Drill Chucks

As an Amazon Associate I earn from qualifying purchases.

1. Milescraft


Milescraft 1318 Drillmate Drill Guide with chuck

Milescraft #ad - Adjustable depth stop and spring action control of the head. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base. Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height2 Inches
Length16.63 Inches
Width7.13 Inches
Part Number1318

2. Wolfcraft


Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

Wolfcraft #ad - Drill adapter itself slides up and down on guide-bars. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place. Fits all 1/4-inch or 3/8-inch drills. Drill guide that can be used in horizontal, vertical or angle positions. Guide-bars themselves have springs for a quick return when doing repetitive drilling.
BrandWolfcraft #ad
ManufacturerWolfcraft #ad
Height11.75 Inches
Length5.25 Inches
Weight3 Pounds
Width5.5 Inches
Part Number4525404
WarrantyLimited Lifetime



3/8" And 1/2" Power Drills, CIPCO PRO TOOL Multi-Angle Drill Guide Power Drill Stand with Chuck for 1/4”

CIPCO PRO TOOL #ad - Please refer to the installation instructions and usage instructions in the video. All metal head : attaches to all 1/4”, 3/8" and 1/2" Power drills and it also includes a 3/8" Capacity chuck with key.

Whether it’s on the wall, on the ceiling, at a slant, or in round materials, exact drilling is easy. Holds round materials securely : V-groove, Metal base and three v-grooves for drilling on round stock. Depth stop & large handle : adjustable depth stop and spring action control of the head. Non-slip feet : prevent slipping and marring on the work surface, that can be removed to mount with screws when needed. Adjustable angle settings : angle readout for setting drilling angles to 45°, 75°, 60°, and 90°.
ManufacturerCIPCO PRO TOOL #ad
Height2.56 Inches
Length11.81 Inches
Width5.9 Inches

4. WEN


WEN 4208T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press

WEN #ad - Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations. Cord Length ft. 6. Motor: 120v, 60hz. Horsepower: 1/3 HP. 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right. Durable 1/3 hp induction motor develops ample torque and power. Operates at 5 different speeds: 740, 1530, 2100, 1100, 3140 RPM. Swing: 8 inch. Includes a 1/2-inch keyed chuck and onboard key storage.
BrandWEN #ad
ManufacturerWEN #ad
Height11 Inches
Length7.5 Inches
Weight31 Pounds
Width22.88 Inches
Part Number4208
Warranty2-year warranty, 90-day commercial

5. Kanzawa


Kanzawa Drill guide DX K-802

Kanzawa #ad - This product is the successor to the k-801. Thumbscrews are large in diameter and easy to tighten. Product details ・chuck: 10mm drill chuck ・shank: 10mm/round/three-sided ・Total length: 260mm ・Stroke: 130mm ・Weight: 1, 350g. The main body is made of lightweight and durable die-cast aluminum. The base has scribed lines to make it easy to find the center. The depth of the hole can be freely determined by adjusting the position of the stopper.
BrandKanzawa #ad
ManufacturerKanzawa #ad
Height2.2 Inches
Length10.2 Inches
Weight2.98 Pounds
Width6.1 Inches
Part NumberK-802

6. Dremel


Dremel Drill Press Rotary Tool Workstation Stand with Wrench- 220-01- Mini Portable Drill Press- Tool Holder- 2 Inch Drill Depth- Ideal for Drilling Perpendicular and Angled Holes- Table Top Drill

Dremel #ad - Cord management clips for safe storage of power cords, depth markings with depth stop - for consistent depth, inch/metric marking on base for accurate drilling of workpiece, sturdy metal base with 4 clamping points - to securely hold the station.

Compatible with dremel rotary tool models 100, 395, 400, 4200, 8200, 3000, 398, 285, 4000, 200, 8100, 275, 300, 800, 8220. Tool holder: holds rotary tool at 90 degrees horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal piece. 1 year & usa-based customer service: Available by chat, email, phone or visit us at our service center in Racine, WI.

Articulating drill press stand: Drills perpendicular and angled holes in 15-degree increments, up to 90 degrees horizontal. Drill depth- 2 inches. Flex shaft tool stand: allows telescopic adjustment to any height between 16 and 29 inches, wrenches, Crow's nest provides on-board storage for drill bits, and other dremel accessories.
BrandDremel #ad
ManufacturerDremel #ad
Height12 Inches
Length6 Inches
Weight4.85 Pounds
Width6 Inches
Part Number220-01
Warranty1 Year Warranty

7. Milescraft


Milescraft 1312 DrillBlock- Handheld Drill Guide

Milescraft #ad - Package dimensions:3. 05"l x 5. 33"w x 14. 48"h. The two product v-grooves allow for usage on corners and even cylindrical surfaces too. Centerlines ensure accurate alignment when drilling into various surfaces. Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height1.25 Inches
Length8 Inches
Weight0.29 Pounds
Width2.75 Inches
Part Number13120103

8. Milescraft


MILESCRAFT Standard DrillBlock Drilling Guide

Milescraft #ad - Centerlines ensure accurate alignment when drilling into various surfaces. Solid metal guides offer six common drill diameters: 1/8", 1/4", 3/16", 5/16", 3/8" and 1/2". Ergonomic design comfortably fits hands of all sizes with ease. Nonslip grips inserted in top and bottom surface hold DrillBlock in place. V-grooves on bottom align guide for drilling square corners and dowel surfaces.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height1.45 Inches
Length2.7 Inches
Weight0.29 Pounds
Width8 Inches
Part Number13120103

9. Big Gator Tools


Big Gator Tools MDG1000NP V-Drill Guide

Big Gator Tools #ad - Heat-treated nickel alloy steel provides durability & accuracy. Includes 17 metric drill sizes: 3mm, 9mm, 7mm, 4.5mm, 7. 5mm, 6. 8mm, 6mm, 4mm, 5.5mm, 3. 3mm, 6. 5mm, 3. 5mm, 4. 2mm, 8mm, 5mm, 8.5mm, 9. 5mm. Precision ground base provides perpendicular alignment of drill bit on flat surfaces. Universal & portable v-Drill guide provides perpendicular alignment of drill bits on flat, round or square materials.
BrandBig Gator Tools #ad
ManufacturerBig Gator Tools #ad
Height0.85 Inches
Length5.5 Inches
Weight0.56 Pounds
Width0.8 Inches
Part NumberMDG1000NP
WarrantyLifetime warranty does not cover abuse