As an Amazon Associate I earn from qualifying purchases.

1. NTE Electronics

#ad

10' Length, 4 Blue.098" Width, NTE Electronics SW02-10 No-Clean Solder Wick

#ad
NTE Electronics #ad - Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Available with standard or anti-static bobbins.
BrandNTE Electronics #ad
ManufacturerNTE Electronics, Inc. #ad
Part NumberSW02-10
ModelSW02-10

2. AUSTOR

#ad

1.5m Length with Flux, Desoldering Vacuum Pump Solder Removal Tool, AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width

#ad
AUSTOR #ad - High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable. High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.

Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.7

7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size. Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, length 1. 5m, can be used to clean the spare solder on the pin away to avoid short circuit, 2 pieces for each size; geometrically-precise weave, width 2.0mm/2. 5mm/3. 0mm, to meet your various of soldering needs.
BrandAUSTOR #ad
ManufacturerAUSTOR #ad
Height0.79 Inches
Length7.48 Inches
Width5.12 Inches

3. Tabiger

#ad

2pcs Solder Braid 2.5mm Width, Solder Sucker & Desoldering Wick, 1.5m Length- Desoldering Vacuum Pump Solder Remover, Tabiger Solder Wick & Desoldering Pump

#ad
Tabiger #ad - Desoldering wick with copper braid 2pcs solder braid with the size 2. 5mm width, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, 1.5m length, the solder braid can quickly absorbed molten solder and left a clean working area.

3-in-1 solder removal tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, the desoldering wick absorbs solder, while the solder wick is better for small amounts of solder, the desoldering pump pulls it away quick, a must-have tool for electronics kit, the solder sucker takes up large amounts. One-handed solder sucker with powerful suction whether you are right or left-handed, the desoldering pump designed with double ring double open and "vacuum" button, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, which make the sucking power awesome. Abs body with non-slip sponge and nylon nozzle desoldering pump the body of the desoldering vacuum pump is made of high quality ABS, make it comfortable to hold, also the covered sponge can absorb sweat and heat, which make the solder sucker delicate and durable, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.

Widely used solder remover the desoldering wick & desoldering pump can be used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, remove relays and other components from printed circuit boards, desoldering computer parts such as a motherboard, unsoldering old wire from devices, clean alloy on smd components and more.
BrandTabiger #ad
ManufacturerTABIGER #ad
Height0.7 Inches
Length9 Inches
Weight0.17 Pounds
Width4 Inches
Part NumberTB-02-US
Model.

4. MG Chemicals

#ad

0.075" Width x 5' Length, MG Chemicals 425-NS #3 No Clean Super Wick Desoldering Braid, Green

#ad
MG Chemicals #ad - High sir-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III. No clean super wick. Static free bobbins. Flux residue remaining on board does not have to be cleaned. Flux residue is non-conductive and non-corrosive.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Height0.39 Inches
Length1.57 Inches
Weight0.02 Pounds
Width1.57 Inches
Part Number425-NS
Model425-NS
Warranty[email protected]

5. Tabiger

#ad

Desoldering Wick & Desoldering Pump, 1.5m Length, Solder Sucker & Solder Wick2.5mm Width, Solder Remover Kit for Desoldering

#ad
Tabiger #ad - Durable desoldering iron tool the body of desoldering pump is made of aluminum, corrosion and have good heat dispersion, which can resistance to beat, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.

One-handed use design the solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready. A must-have solder removal kit the solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.

High quality and powerful sunction the solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively. Alloy braided solder wick precision weaving solder braid with the size 2. 5mm width, 1. 5m length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
BrandTabiger #ad
ManufacturerTABIGER #ad

6. Vastar

#ad

Solder Braid 2.5mm Width, 1.5m 5ft Length, Vastar Solder Wick, 3 Packs Desoldering Wick

#ad
Vastar #ad - Size of the solder wick: width 2. 5mm, length 1. 5m, weight 04oz. Pure oxygen free copper wire. Geometrically-precise weave. High quality desoldering braid. Unique no clean flux for easy to use.
BrandVastar #ad
ManufacturerVastar #ad
Height1.2 Inches
Length4.68 Inches
Weight0.01 Pounds
Width3.8 Inches
Part NumberVDW3-ALX-1
ModelVDW3-ALX-1

7. YWBL-WH

#ad

5Pcs 1.5m Solder Wick Desoldering Braid Wire Solder Remover 1.5/2.0/2.5/3.0/3.5mm for Print Circuit Board Computer Motherboard Mobile Phone Board

#ad
YWBL-WH #ad - Desoldering wire can quickly remove unwanted solder when used with a soldering iron. Solder wick is ideal for the desoldering of print circuit board, computer motherboard, mobile phone board, etc. Provide multiple width of solder wick for different desoldering requirements. Solder remover has good effects of desoldering and tin suction, little remains. Desoldering braid wire adopts high purity oxygen-free copper wire.
BrandYWBL-WH #ad
ManufacturerYWBL-WH #ad
Height1.97 Inches
Length3.94 Inches
Width1.97 Inches
Part NumberYWBL-WHk5wbvdg9xm

8. OMORC

#ad

1.5m Length – Desoldering Vacuum Pump Solder Removal Tool, Solder Sucker & Solder Braid 2.5mm Width, OMorc Desoldering Wick

#ad
OMORC #ad - The solder wick can help clean some residue flux and BGA thermal bonding pad too. Solder wick braid. The desoldering wick is 2. 5mm wide and 1. 5m in length.

Weight: 04oz. Measuring 7. 48''x079'', the desoldering pump can be used with only one hand, either your right or left hand. Top-notch quality. Compact and lightweight. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively. With low residue design, especially in small, this solder braid will help clean spare solder on the pin away to avoid short circuit, hard to reach areas. Solid construction. The solder sucker has plastic backing to ensure stability. Pure oxygen free copper wire, no clean flux for easy to use.
BrandOMORC #ad
ManufacturerOMorc #ad
Height1.2 Inches
Length11.7 Inches
Width4.7 Inches
Part NumberOTGEDS006AD
ModelUSAE1-VTGEDS006AD-VD

9. PINCHUANG

#ad

Desoldering Wick, PINCHUANG 10PCS Solder Wick, Solder Braid, 15m 15ft length, Copper Solder 1.5mm Width

#ad
PINCHUANG #ad - Package: 10pcs solder wick braid, whose Width 1. 5mm, total Length 15m. Our guarantee:if you are not satisfied for any reason, just return for a refund of your purchase price; we promise 24 hours customer support, please feel free to contact us for any product&order problem. High quality: anti-static, heat resistant and durable. Easy to operate: remove more solder than conventional wick and also easy to correct mistakes on small PCB boards. Made from pure oxygen free copper wire.
BrandPINCHUANG #ad
ManufacturerPINCHUANG #ad