Top 9 Corner Clamp for Glass – Angle Clamps

As an Amazon Associate I earn from qualifying purchases.

1. LTDOOIT

#ad

Corner Clamps for Woodworking Set of 4, Adjustable Corner Square Clamp for Picture Frames Glass Holder Hand Tools, 90 Degree Right Angle Clamp

#adLTDOOIT #ad - Set of 4 corner clamp: one package includes 4 pieces Right Angle Clamps, satisfy common daily use. Durable & rustproof material: Strongly built with full aluminum one die-casting molding, red rustproof mask outside, this angle clamp is robust and durable.

Save working time and reduce work difficulty. Independently adjustable rotating jaw: Only needs one finger to rotate the screw, to adjust to different clamp rang, suitable for different thicknesses of work pieces. Maximum clamp range: 3 inch/77mm, and not only perfect for holding joint at 90-degree angle, also can be used for 45-degree clamp. Multifunctional usage: this ltdooit corner clamp is Perfect fit for woodworking, picture framing reinforcement, cabinet and furniture connection, fish tank fixing, wood DIY project holding etc.

Brand	LTDOOIT #ad
Manufacturer	VONLU #ad
Part Number	82-315H-4IYV

2. RDEXP

#ad

RDEXP 90 Degrees Aluminum Alloy Glass Clamp Holder Bracket Clamp Cabinet Cupboard for Glass 8-12mm Thickness Set of 4

#adRDEXP #ad - Suitable for 8-12mm Thickness glass cabinet cupboard. Made of aluminum Alloy Material, strong and durable. Please allow 1-3mm error, due to it is manual measurement. Easy and convenienttly to install, no need to drill a hole.

Brand	RDEXP #ad
Manufacturer	RDEXPAM #ad
Part Number	M5180402074

3. Top Hardware

#ad

Brush Finish, CC-101290S, Square 90 Degree Sleeve Over Shower Door Glass Clamp

#adTop Hardware #ad - Includes: gaskets and a hex key. Shipping from New York. This clamp is constructed of corrosion-resistant solid brass. 1/2" 12 mm hole diameter required, use with glass thickness from 3/8" 10 mm to 1/2" 12 mm. Remove gaskets for different thickness of glass. Use with monolithic tempered glass.

Brand	Top Hardware #ad
Manufacturer	Top Hardware #ad
Height	1.5 Inches
Length	3 Inches
Weight	7 ounces
Width	3 Inches
Part Number	CC-101290S

4. Ranbo

#ad

2-PCS Black 90Degree, Ranbo 304 Stainless Steel 90 Degree Square Frameless Glass Clamp Connector/Shower Door Fixed Panel/Glass-to-Glass Corner Clamp,for 5/16 to 1/2 8 to 12 mm Glass Thickness

#adRanbo #ad - Order today to enjoy our Glass Clamp. Use with glass thickness from 5/16" 8 mm to 1/2" 12 mm. 100% satisfaction guaranteed - customer satisfaction is our highest priority, if for any reason you are not completely satisfied with our Glass Clamp we will immediately provide you a full refund or replace your item. Constructed from high quality SUS304 Stainless Steel, ensuring quality and longevity, sturdy and durable. Black finish. 4mm-thick stainless steel and Brushed nickel finish will not rust, build to resist daily scratches, clean and bright, corrosions and tarnishing.

Brand	Ranbo #ad
Manufacturer	Ranbo #ad
Height	0.79 Inches
Length	2.4 Inches
Width	1.77 Inches

5. Ranbo

#ad

2-PCS Chrome … 0 Degree, Ranbo 304 Stainless Steel 0 Degree Square Frameless Glass Clamp Connector/Shower Door Fixed Panel/Glass-to-Glass Corner Clamp,for 5/16 to 1/2 8 to 12 mm Glass Thickness

#adRanbo #ad - Use with glass thickness from 5/16" 8 mm to 1/2" 12 mm. Order today to enjoy our Glass Clamp. 304 stainless steel, corrosion resistant, strong and sturdy. 100% satisfaction guaranteed - customer satisfaction is our highest priority, if for any reason you are not completely satisfied with our Glass Clamp we will immediately provide you a full refund or replace your item. Surface mirror treatment,.

Brand	Ranbo #ad
Manufacturer	Ranbo #ad

6. Ranbo

#ad

Ranbo Hypotenuse 304 Stainless Steel Square Frameless Glass Clamp Connector/Shower Door Fixed Panel/Glass-to-Glass Corner Clamp,for 5/16 to 1/2 8 to12 mm Glass Thickness, 2 PCS Polished Chrome

#adRanbo #ad - Order today to enjoy our Glass Clamp. Surface mirror treatment,. 100% satisfaction guaranteed - customer satisfaction is our highest priority, if for any reason you are not completely satisfied with our Glass Clamp we will immediately provide you a full refund or replace your item. Use with glass thickness from 5/16" 8 mm to 1/2" 12 mm. 4mm-thick stainless steel and Polished Chrome finish will not rust, build to resist daily scratches, clean and bright, corrosions and tarnishing. Constructed from high quality SUS304 Stainless Steel, ensuring quality and longevity, sturdy and durable.

Brand	Ranbo #ad
Manufacturer	Ranbo #ad
Height	0.79 Inches
Length	2.4 Inches
Weight	0.94 Pounds
Width	1.77 Inches

7. CaoXiong

#ad

2 Pack Right Angle Clamp,90 Degree Angle Corner Clamps Holder Clip Fixed Woodworking Frame Clamp for Picture Frame Holder, Glass Holder,DIY Woodworking Holder

#adCaoXiong #ad - Package includes 2 pack right angle clamps, suitable for box framing, drilling, doweling. Corner clamps perfect to hold joint at a 90 degree angle, can also be used for 45 degree sawing. Right angle clamp holder for woodworker, fish tank fixing, picture frame reinforcement, carpenter, photo framing and aquarium framing. Aluminum alloy construction with steel screws, high hardness, will not rust, suitable for the production of reinforced frame, tank production . Maximum clamping range 75mm/3in, generally 4 right angle clamps all together to use.

Brand	CaoXiong #ad
Manufacturer	CaoXiong #ad
Height	0.59 Inches
Length	3.94 Inches
Weight	0.01 Pounds
Width	1.97 Inches
Part Number	CX_ZhiJiaoGuDingJia_Hong_2PCS

8. CILEONBE

#ad

Glass Holder, DIY Woodworking Hand Tools, 90 Degrees Corner Clamp, Right Angle Clamp, Picture Frame Holder

#adCILEONBE #ad - Products include: 4pcs/set right angle clamp; Material: Aluminum Alloy with steel screw; Maximum clamping range: 7cm/ 2. 75 inches. Each right angle clip workers have been checked, and the lead screw tightening test.

Aluminum alloy construction with steel screws. This clamp with steel threaded vise screws and two countersunk mounting holes for permanent installation on the bench. High hardness, will not rust. There are tons of applications that this clamp can be used for, framing and picture frame creation, drilling, some are but not limited to: crafts and projects, arts, engineering, cabinet and cupboard fabrication and even metal framing and welding.

Brand	CILEONBE #ad
Manufacturer	GoLucky7 #ad
Height	0.91 Inches
Length	0.01 Inches
Width	0 Inches

9. INCREWAY

#ad

4 Pieces Adjustable 90 Degrees Glass Clips Aluminum Alloy Glass Shelf Support Bracket, INCREWAY Glass Clamp, Glass to Glass Holder Connector for 10-12mm Thick Glass in Kitchen Balcony Guardrail

#adINCREWAY #ad - Durable alluminum alloy: made of high-quality space aluminum alloy material, lighter than stainless steel, but hard to fade, sturdy and durable, having long service life. Easy for using: these glass holders are punch-free, showcase, very easy and convenient for installing.

For 10-12mm glass: these glass clamps are suitable for 10-12mm thick glass, good choices for you to DIY glass showcases and furnitures. Thicken clips: thicken clamp panel provides better load bearing without worrying that the glass will easily loose or fall out; Curved clip edge is smooth and free of burrs, can avoid scratching fingers or abrading glass. Ideal hardwares for DIY glass fence, swimming pool fence and balcony guardrail etc. Anti-skid screws: small screws with soft rubber plug, anti-slip and wear-resistance, avoid glass slippage and wear during installation, for better fit.

Brand	INCREWAY #ad
Manufacturer	INCREWAY #ad
Part Number	INC-HW06-228-US8