As an Amazon Associate I earn from qualifying purchases.

1. GOWE

#ad

GOWE WAX INJECTOR LOST WAX MOLD JEWELRY CASTING ROUND JEWELRY WAX INJECTOR JEWELER WAX CASTING TOOL

#ad
GOWE #ad - Parameters: power supply ac220v, 50/60HZ, single phasePower 450VA; Maxcompressed air range 030-070mpa; temperature display range 40-99. 9;. Thermostat used are high accuracy range 80C-100C; Operating voltage 220V/ AC/ Single phase.

Aluminum tank is provided for quick heating of wax. Setting time range for vacuum 0-25 seconds; setting time range for wax injection 025 seconds; setting time range for warming the machine 0-99hours; Wax capacity 2. 5kg; temperature precision +/-01; aluminum ceramic-Mica Heating Element;. Wax drain spigot; double sealed no-leak nozzle; liquid Filled High Sensitive Thermostat, Insures Consistent Accurate Temperature; Optional:Second Nozzle; CLA Approved;.

Double nozzle for wax injection. Pressure regulator with safety valve. Moreover, it is easily washed. Features: with good performance for complicated workpiece; inner wax pot made from special aluminal alloy material which is with good, fast and even thermal conductivity, thus could inject wax around the temperature of 65 celsius degree.
BrandGOWE #ad
ManufacturerGowegroup #ad
Weight2.2 Pounds
Part NumberGWE-1008775

2. SE

#ad

SE 12-Piece Stainless Steel Wax Carvers Set, DD312

#ad
SE #ad - Great for carving, shaping, modeling, cutting, scraping, etc.6" average length. Double-sided for a variety of shapes and uses. Durable and long-lasting stainless steel construction. Balanced weight.
BrandSE #ad
ManufacturerSona Enterprises #ad
Height0.5 Inches
Length6 Inches
Weight0.5 Pounds
Width0.5 Inches
Part NumberDD312
ModelDD312

3. Ferris

#ad

Sticky Wax Ferris Fast Drying Bonding Jewelry Casting Wax 24 Sticks 3 oz Box E 5

#ad
Ferris #ad - Sticky wax will not hinder melt-out - clean burnout, leaves no residue and is ideal for both large and small parts. Ferris sticky wax will not hinder melt-out, leaves no residue and is ideal for both large and small parts.

Sticky wax stick form 3oz. Recommended application temperature is 225º – 275ºF 107°– 135°C for optimal adhesion. 24 sticks measure approximately 5" x 1/4" / 127mm x 6. 35mm note: some pieces may be broken in the box. Freeman / ferris sticky wax a specialty wax, fast-setting wax used for repairing wax patterns, is a hard, adhering waxes together, and excellent for joining patterns on casting sprue tree and to the sprue base. Stick form in round shape 3oz. Hard fast drying specialty wax for jewelry & craft work sprue casting trees join weld wax partS.
BrandFerris #ad
ManufacturerFerris #ad
Weight0.38 Pounds

4. Exso

#ad

Adjustable Temperature Welding tool. JY-21200200WStick typeMADE IN KOREA, earth wire and steel plate, EXSO High Temp Heavy Duty Soldering for big ground connection

#ad
Exso #ad - Soldering for big ground connection, earth wire and steel plate. Suitable for special work also possible supply cause special tip produce. Durability of heater is very excellent cause used new cartridge. Three-step temperature control of high/low/off, power lamp adopt. Highly efficient tip and strongly design for plate or industrial.
BrandExso #ad
ManufacturerExso corporation Ltd. #ad

5. Worii

#ad

Furniture Pads,Rubber Sprue Base Jewelry Processing Accessory Rubber Base Plate for Wax Casting3in

#ad
Worii #ad - Material:made of high quality material, solid and durable to use. We will reply you instantly and help you solve your problem. Guarantee:if you are not satisfied with our product you received, you can send emails to us at any time. Necessary tools for jewelry makers and jewelry repairing workers. Necessary tools:corrosion resistance, high temperature resistance and wear resistance. Easy to carry: Portable and lightweight, easy to carry and store. Features:used for jewelry casting, shaft seal, dust seal, hole seal, oil seal, rotary seal, fixed seal, water seal.
BrandWorii #ad
ManufacturerWorii #ad
Height0.39 Inches
Length0.39 Inches
Weight0.11 Pounds
Width0.39 Inches
Part NumberWoriit5xmpg7rsv-01

6. Newtex

#ad

Newtex ZetexPlus 250 14 inch High Temperature Casting Operations Safety Protective Mittens, Made in the USA

#ad
Newtex #ad - Extra insulation for durability and longevity of use. Protection from continuous operating temperatures up to 1500F; Intermittent temperatures up to 2000F. Manufactured by Newtex in Rochester, New York. One size fits all; Designed to fit loosely for quick removal. Premium grade wool liner; Double-stitched, reinforced seams.
BrandNewtex #ad
ManufacturerNewtex #ad

7. Electriduct

#ad

48W Adjustable Temperature Controlled Soldering Station TL-ZS-STATION-Z98

#ad
Electriduct #ad - Adjustable temperature from 150°C to 480°C. 48w station, 110w/130v light weight pencil iron, anti-slip grip and tip cleaning sponge. 48-watt temperature controlled Soldering Station TL-ZS-STATION-Z98. Entry-level, for hobby users.
BrandElectriduct #ad
ManufacturerElectriduct #ad
Part NumberTL-ZS-STATION-Z98

8. Beaux-Artes, Ltd.

#ad

Vent Cover, or Return Register. Made of Urethane Resin to fit Over a 20"x20" Duct or Opening. Total Size of Vent is 22"x22"x3/8", Decorative Grille, for Wall and Ceiling grilles not for Floor use.

#ad
Beaux-Artes, Ltd. #ad - Our grilles will also reduce or eliminate the irritating high pitched noise problems often found with stamped steel louvered return grilles. Government’s general services administration code #1501003S standards for Historic Preservation Guidelines, for grilles in historic buildings. Our grilles are flat on the back, measurements, plus Free Air Flow and other information.

Use these grilles in new homes that want the traditional look or historic homes that need to preserve their vintage character. Use our grilles to replace noisy high pitched metal return grilles, your ears will be glad you did. See attached “spec sheet” with drawing, with no protrusion that needs to fit into the duct-work. Meets U. S. Much superior to the rough and grainy looking surfaces of cast iron or cast aluminum grilles. Maintenance free, bathrooms, like exteriors, corrosion or mold for life of our exterior grade urethane resin grilles.

Arts & crafts style grille; historic reproduction of possibly the best looking grille ever made in usa, circa 1870's use to replace old louvered grilles for wall & ceiling only not for floors. Can be used in damp or wet locations, remove rust, you should not have to re-finish, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost.
BrandBeaux-Artes, Ltd. #ad
ManufacturerBeaux-Artes, Ltd. #ad
Height22 Inches
Length22 Inches
Weight3.5 Pounds
Width0.4 Inches
Part NumberRR-209 20x20 Rubbed Bronze Finish
ModelRR-209 20x20 Rubbed Bronze Finish

9. ABN

#ad

D-Sub, ABN Quick-Change Ratchet Crimper Pliers & Die 6-Piece Crimping Tool Kit – Insulated, More Crimp Set, Barrel

#ad
ABN #ad - Secure terminals to wire: the abn ratcheting wire crimper tool with Dies will allow you to perform precise and uniform crimps with each use; Quick-change design allows you to easily swap out jaw sizes by sliding and clicking into tool without special tools and without frustration.

Easy storage: heavy-duty 11 x 2 x 7. 5-inch 27. 9 x 5. 1 x 19. 1cm plastic blow-molded case for easy transportation, safe storage, and quick organization; Individual terminal compartments are labeled for simple identification. Grip comfortably: non-slip red polypropylene pp and black thermoplastic rubber TPR 4. 7-inch 11. 9cm handles; ambidextrous design use with either hand; Pull handles together while ratchet clicks and does not release until you compress jaws fully together; Terminal compression adjustment on handle. Contents: wire crimp tool terminal package includes 1 ratcheting wire terminal crimper tool, 5 dies insulated a jaw awg 22-18/16-14/12-10; non-insulated b jaw awg 20-18/16-14/12-10/8; Open Barrel C Jaw AWG 20-18/16-14/12-10; Insulated Cord-End D Jaw small AWG 22/20/18/16/14/12; Insulated Cord-End F Jaw huge AWG 10/8/6, and 1 carrying case.

Quality you need: dies are pre-oiled and constructed from heat-treated alloy steel with wax-lost casting and zinc phosphate surface treatment; Ratchet wire crimping tool terminal crimper plier constructed from carbon steel and black-oxide finish.
BrandABN #ad
ManufacturerABN #ad
Height2 Inches
Length11 Inches
Weight2.5 Pounds
Width7.5 Inches
Part Number4620
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

10. Beaux-Artes, Ltd.

#ad

Decorative Grille, or Return Register. Made of Urethane Resin to fit Over a 8"x30" Duct or Opening. Total Size of Vent is 10"x32"x3/8", for Wall and Ceiling grilles not for Floor use., Vent Cover

#ad
Beaux-Artes, Ltd. #ad - Urethane resin grilles will not vibrate and make noise like metal grilles do. Government’s general services administration code #1501003S standards for Historic Preservation Guidelines, for grilles in historic buildings. Our grilles are flat on the back, plus Free Air Flow and other information.

Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Can be used in damp or wet locations, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Our grilles will also reduce or eliminate the irritating high pitched noise problems often found with stamped steel louvered return grilles. Arts & crafts style grille; historic reproduction of possibly the best looking grille ever made in usa, circa 1870's use to replace old louvered grilles for wall & ceiling only not for floors.

See attached “spec sheet” with drawing, with no protrusion that needs to fit into the duct-work. Use our grilles to replace noisy high pitched metal return grilles, your ears will be glad you did. Use these grilles in new homes that want the traditional look or historic homes that need to preserve their vintage character. Incredible three dimensional detail of grille see expanded view, not just hole punched sheet metal. Easy installation, level and screw in. Meets U.
BrandBeaux-Artes, Ltd. #ad
ManufacturerBeaux-Artes, Ltd. #ad
Height10 Inches
Length32 Inches
Weight3.5 Pounds
Width0.37 Inches
Part NumberRR-209 08x30 Rubbed Bronze
ModelRR-209 08x30 Rubbed Bronze