Top 8 Dryer Vent Hose Adapter – Clothes Dryer Replacement Vents

As an Amazon Associate I earn from qualifying purchases.

1. Dryer Dock

#ad

Two-Piece Dryer Hose Quick-Connect, Twist & Lock Tight, Fits 4 Inch Tubes, Dryer Dock The Original Dryer Vent Quick Release

#ad
Dryer Dock #ad - Dryerdock quick-connect - it is the easiest way to connect your dryer's vent to your house vent. Eliminates environmental intrusion - made of rigid abS plastic and fastens together with a slight twist, pest intrusion, eliminates air drafts, the rigid design keeps the hose securely in place, saves energy, wear and tear on both dryer and clothes.

Fits 4" tubes with a 6" flange. Dryer dock is the “gold standard” of quick release in the industry for home and commercial applications, and offices. Easy maintenance - dryer dock is a two-piece “quick release System” that enables quick access to your dryer vent hose and vent pipe, allowing for easy removal and cleaning. This unique solution is easy to install, saves space behind the dryer, looks great when installed, and makes maintenance a snap.

Proudly made in the USA. Prevents fires - according to the national fire protection association, dryer vent fires are the number one cause of household fires, causing around 51 deaths, 380 injuries, nearly 17, 000 home dryer fires are reported each year, and $236 million in property loss. The original dryer dock - patented under usp # 6, factories, it is installed in more than 500, 131, 000 homes, 958. Keeping the vent clean, saves energy, and prevents dryer fires.
BrandDryer Dock #ad
ManufacturerVentpro Inc #ad
Height6 Inches
Length3 Inches
Weight0.3 Pounds
Width6 Inches
Part Number5000-1
Model5000-1

2. Repa Market

#ad

Duct Inline Reducer Increaser Connector to Vent Adapter 3 4 5 6 Inch // 80-150 mm

#ad
Repa Market #ad - Installation: measure the different diameters of the ducts and then cut the duct reducer to the size needed. Tools for cutting are not provided, we suggest a saw. Easy! duct tape or flexible duct clamps may be required for a perfect seal.

Can be used with hvac systems: bathroom extractor fans, anywhere else in the apartment, hydroponics, cooker hoods, kitchens or, tumble dryers, inline ventilators, home or office space. Insert the duct connector into or on the the pipes and then push them together. Reduces or increases in steps from of 3, 5, 4, or 6 Inch // 80/100/120/125/150 mm.

All in one: this is a very practical robust, from small to large, solid duct reducer or increaser which can be used when connecting two different, or vice versa, solid or flexible ducts or ducts to ventilators, larger to small. Durable material: Made of clean gloss white lightweight plastic and is rust free.
BrandRepa Market #ad
ManufacturerREPA MARKET #ad

3. Deflecto

#ad

Silver AMDOC/6, 4" Diameter, Deflecto Dryer Offset Connector

#ad
Deflecto #ad - Helps solve tight space-venting problems. Vertical, horizontal or diagonal installation. For use with electric dryers. Fits most dryer backs. Pure aluminum construction.
BrandDeflecto #ad
ManufacturerDeflect-o Products #ad
Height10 Inches
Length5 Inches
Weight0.2 Pounds
Width4.75 Inches
Part NumberDEFAMDOC
ModelAMDOC/6
WarrantyPTRDEFAMDOC

4. Beaquicy

#ad

Beaquicy STV-90 Dryer Duct Connector, Snap to Vent 90 Elbow, Indoor Hook-up Dryer Vent Kit

#ad
Beaquicy #ad - Save your money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. The service life of stv-90 will definitely be longer than any other duct clamp! About service : the product stv-90 dryer duct connector supports 30 days return and exchange.

Our company attaches great importance to the shopping experience of each customer. This means your clothes get dryer faster and you save electricity bills. Diameter 90 degree elbow dryer connector is made to connect a semi rigid or flexible dryer hose with no hose clamps necessary. Easy to install: snap the hose onto the connector, place the seal ring on the wall or dryer duct and simply push hose with connector onto duct.

We will try our best to solve the problem. Thanks. Package includes: stv-90 dryer vent connector includes one snap to vent 90 elbow, one snap connector and one seal ring to connect to the wall duct or dryer duct. This 5. 5 in. H x 4. 25 in. If you have any questions during shopping, please contact customer service in time.
BrandBeaquicy #ad
ManufacturerBeaquicy #ad
Part NumberSTV-90

5. ZIGGURAT PRODUCTS

#ad

STV-90 Dryer Duct Connector, by Ziggurat Products, DIY Easy Dryer Vent Hookup Kit

#ad
ZIGGURAT PRODUCTS #ad - No more fiddling around with rigid metal dryer clamps! Saves you money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy.

Works with your hose: we’ve updated our design to fit any 4” vent ducting, whether beveled or straight. Simply slide it on and push your dryer back. This means your clothes get dryer faster and you save money on your power bill! Avoid the headache: the stv-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow. Your stv-90 is sure to last longer than any other duct clamp out there! Does the trick: the snap-to-vent simple design gives you the power to hook up your dryer in just a matter of a few minutes.

You don’t need to go searching for the right sized clamp anymore--we’ve got you covered! Effortless and durable: our sturdy elbow connector makes set up simple and a one-time project.
BrandZIGGURAT PRODUCTS #ad
ManufacturerDesign-Tek #ad
Height5.5 Inches
Length6.25 Inches
Weight0.5 Pounds
Width4.5 Inches
Part NumberSTV-90
ModelSTV-90

6. Cenipar

#ad

Cenipar STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

#ad
Cenipar #ad - Attach it to the dryer and to the wall. Simply pre-install 90" elbow, 4" hose and straight. Also reusable without kinking the hose or losing airflow. Place of use: in the dryer duct fitting, is not easy to fall off, the silicone sealing strip has strong viscosity, and can form a good seal between the pipe and the joint.

No tools or attachment clips of any kind are required. With our newest stv-90 dryer duct connector design, curved or straight to match. Why choose us: our 90 degree elbow dryer duct connectors are made of silicone and other sturdy materials to ensure that the dryer hose vent fittings won't break, tear or pinch when using the connector. We will strictly implement quality control projects, so that our customers can buy with confidence and use them with confidence. It includes: 1* 90 elbow, 1* plastic drying hose.

Part number: cenipar stv-90 drying Tube Fitting, DIY Simple Dryer Ventilation Connection Kit. Prevent the hose on the back of the dryer from breaking. You can follow the instructions to quickly install, 1* drying hose clamp, snap and insert your dryer hose vent fittings and fittings in a fraction of the time. What it is: our silicone seals give you a sealed dryer connection, you can install any 4" vent pipe or 4" flexible dryer hose, making your dryer more efficient and clothes drying faster while consuming less energy and saving on electricity bills.
BrandCenipar #ad
ManufacturerCenipar #ad
Height6.5 Inches
Length5.31 Inches
Weight0.9 Pounds
Width9.4 Inches
Part NumberSTV-90
ModelSTV-90

7. ZIGGURAT PRODUCTS

#ad

Snap to Vent Wall Plate Adapter, Easy Connect Dryer Hose System by Ziggurat Products

#ad
ZIGGURAT PRODUCTS #ad - Pair our wall plate adapter with our STV-90 or our STV-M for the simplest and most effective dryer connection ever. With the ziggurat wall plate Adapter, you can ensure that the seal between your hose and wall duct is secure and air tight.

Our aim is to make things simpler, and with our system, you'll wonder why you ever spent hours messing with dryer vents. Covers a large area: even if the wall duct for your dryer is large, our adapter is 7" by 7", so you can be sure you're covered. Pair with our other products: our products not only work for any home, they also work seamlessly together. Simplify your dryer connection: our frustration with metal clamps and bad seals is what led us to create our products.

Just press it on to install and pop it off for annual cleanings. Safe and effective, our Wall Plate Adapter is sure to last you as long as you need it to. Built to last: ziggurat products are built with premium materials and designed to outlast anything you can throw at them. Air tight and easy access: using our seal ring, you can make an air-tight seal for your ductwork with easy--but without the pain of metal clamps and tools.
BrandZIGGURAT PRODUCTS #ad
Part NumberSTV-WPA

8. Deflecto

#ad

Deflecto Duct Increaser and Reducer, White, Plastic Inline Adapter, 4” to 3” IRB43

#ad
Deflecto #ad - Ideal for bathroom fan installations. Durable polypropylene construction has a melting point of approximately 325 degrees. Simply slip the ducts over the increaser/reducer, tightening in place with clamps not included. Connects a 4 inch dryer exhaust hood to a 3 inch duct. Designed to transition between 4" and 3" diameter ducts.
BrandDeflecto #ad
ManufacturerDeflecto #ad
Height4 Inches
Length4 Inches
Weight0.1 Pounds
Width3.4 Inches
Part NumberDEFIRB43
ModelIRB43
WarrantyDeflecto Duct Plastic Increaser and Reducer, 4" to a 3", (IRB43)