As an Amazon Associate I earn from qualifying purchases.

1. Quentacy

#ad

Quentacy DC 0/1-10V LED Dimmer Knob Controller Rotary Mini Switch PWM Dimming for Dimmable Interior Lighting Spotlight Grow Lamp LED Driver

#ad
Quentacy #ad - The connected power 0/1-10v interface must have a voltage of 10v for dimming;adjustment range: 1-100% ;The max load connected to the drive is 10V/40mA;Minimum output connect cable size is 1007#20AWG;Maximum output cable length :50M.

Designed for 0-10v regulating and compatible all 0/1-10V interface dimmable electronic LED Driver & ballasts & transformers and power dimmers. The dimmer is small and easy to install, switch Size: 32*20*35(mm), Mounting Hole Diameter : φ7mm. When connecting the electronis led driver & ballasts & transformers and power dimmers, careful attention should be paid to connecting "+" and "-" as the picture of Wiring Diagram. Red line connects to "dim+", Black line connects to "DIM-". Place the driver away from direct heat sources and in well-aired spaces. If the driver is built-in, sufficient ventilation must be ensured.
BrandQuentacy #ad
ManufacturerQuentacy #ad
Height0.59 Inches
Length1.34 Inches
Weight20 Grams
Width0.87 Inches
Part NumberWSF-01

2. FLILED

#ad

1 PACK, Multi Gang Installation, White Dimmer, Single-Pole/3-Way Dimmer Switch, Low Voltage Dimmer Switch for 0-10V LED and Fluorescent Fixtures

#ad
FLILED #ad - Single-pole or 3-way. High- and low-end adjustment dials for optimized dimming. 6-amp max at 120v / 3-amp max at 277V. Works with 0-10v dimmable LED panels lights, high-bays, LED troffer. Ul listed and DLC listed.
BrandFLILED #ad
ManufacturerFLILED #ad

3. KEYGMA

#ad

Screwless Wallplate Included, White, ETL Listed, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, 4 Pack, KEYGMA 0-10V LED Dimmer Switch for LED Lights

#ad
KEYGMA #ad - For use with up to 150 watts of dimmable LED/CFL and up to 600 Watts of Incandescent and Halogen lamps. Single pole & 3-way led dimmer, ac 120v~277V 50~60Hz input, 0-10 volts dimmer. This 0-10v led dimmer switch for LED lights can be used in single pole or 3-way applications. Easy to install and use. Features a large rocker paddle to turn lights on/off or to preset level and a fluent slider to brighten/dim lights to suit different activities. 0-10v dimmer switch led, 5%-100% dimming ability, provide the best dimming performance for dimmable LED lights.
BrandKEYGMA #ad
ManufacturerKEYGMA #ad
Height1.57 Inches
Length4.33 Inches
Weight0.6 Kilograms
Width1.97 Inches

4. Leviton

#ad

1200VA, White w/ Color Change Kits Included, 120/277 VAC, Leviton IP710-DLZ IllumaTech Slide Dimmer for LED 0-10V Power Supplies, 10A LED

#ad
Leviton #ad - Flexible – can be used in a single-pole or 3-way installation with a 3-way switch, sold separately. Exceptional – superior quality and dimming performance. Innovative – designed for use with LED fixtures using 0-10V power supplies. Convenient – separate on/off switch with locator light allows you to set and keep preferred dimming level. Advanced – no power pack required for switching.
BrandLeviton #ad
ManufacturerLeviton #ad
Height2.3 Inches
Length4.7 Inches
Weight0.2 Pounds
Width3.1 Inches
Part NumberIP710-DLZ
ModelIP710-DLZ
Warranty2 Year Limited

5. Maxxima

#ad

Maxxima Low Voltage 0-10V Slide Dimmer Switch, Wall Plate Included

#ad
Maxxima #ad - Ul approved, 1 Year Warranty. 600w max incandescent; 150w max dimmable LED/CFL, 120VAC, 60Hz. 3-way and single pole Compatible - Vertical Slide Control Dimming. Wall plate and Mounting Screws Included. Works with led, low voltage applications for 0-10V Dimming like Troffer Fixtures and Commercial Downlights.
BrandMaxxima #ad
ManufacturerMaxxima #ad
Part NumberMEW-DM600LV
ModelMEW-DM600LV

6. TOPGREENER

#ad

TOPGREENER Occupancy Vacancy PIR Motion Sensor with 0-10V Dimmer Light Switch, TDODS5-010, White, 800W Electronic Ballast or LED Driver, Single Pole Low-Voltage Dimmer

#ad
TOPGREENER #ad - Adjustable: variable time delay from 15 sec Test to 30 min, detection range, ambient light level. Lights will automatically turn off when the selected time delay expires.

Motion detection: passive infrared pir sensor reduces false triggers from unwanted movements and turns lights on when motion is detected. Dimmer gradually brightens and fades lights by holding the top or bottom buttons; lights turn on to last used brightness level. Motion sensor switch with low voltage 0-10 dimming, designed to control electronic ballasts or dimmable LED drivers, it allows you to dim the brightness levels of low voltage lighting. Specifications: for use with dimmable electronic fluorescent ballasts or dimmable LED drivers ONLY, wall plate not included, 1200 sq ft coverage area, neutral wire required, 800W max, single-pole, 120-277VAC, UL listed.
BrandTOPGREENER #ad
ManufacturerTop Greener Inc #ad

7. Leviton

#ad

Leviton IP710-LFZ IllumaTech Slide Dimmer for LED 0-10V Power Supplies, 120/277 VAC, 10A LED, 1200VA, White w/ Color Change Kits Included

#ad
Leviton #ad - Innovative – designed for use with LED fixtures using 0-10V power supplies. Flexible – can be used in a single-pole or 3-way installation with a 3-way switch, sold separately. Convenient – separate on/off switch allows you to set and keep preferred dimming level. Exceptional – superior quality and dimming performance. Advanced – no power pack required for switching.
BrandLeviton #ad
ManufacturerLeviton #ad
Height4.15 Inches
Length1.41 Inches
Weight0.2 Pounds
Width2.12 Inches
Part NumberIP710-LFZ
ModelIP710-LFZ

8. LuxDrive

#ad

Verticle Slider Wall Mount Control, LuxDrive 0-10V LED Dimmer

#ad
LuxDrive #ad - 0-10v current sinking Dimmer for LED Lights. Easy 2-wire installation! Face plate and hardware included for mounting. Reverse Polarity Protection. Dim multiple light fixtures with ease.
BrandLuxDrive #ad
ManufacturerLuxDrive #ad
Weight0.38 Pounds
Part Number0F019-W
Model0F019-W