As an Amazon Associate I earn from qualifying purchases.

1. SpeTool

#ad

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, Carving, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut

#ad
SpeTool #ad - Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Industrial quality control to ensure best performance.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-3/8-1/2-U

2. SpeTool

#ad

1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving, SpeTool Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank

#ad
SpeTool #ad - Solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Mortises, better than straight bits. Industrial quality control to ensure best performance. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPL-D1/2-1/2-U

3. SpeTool

#ad

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank, 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

#ad
SpeTool #ad - The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits. Industrial quality control to ensure best performance. Solid carbide up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/2-1/2-U

4. EANOSIC

#ad

Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving 3 inch Total Length, 1-1/4” Cutting Length, 1/2” Cutting Diameter, EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank

#ad
EANOSIC #ad - You can decrease the times of changing cutters, save production time. And also for carbon steel, aluminum alloy. End mill bits can smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, finish machining, end milling, Mortises, better than straight bits.

Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. The router bit suit for CNC router and any plunge routers with 1/2" collet. The cnc end mill router bits apply to various wood: such as plywood, MDF, tool steel, cast iron, soft alloy steel, OAK, and any hardwood working and Long service life for sharp. Spiral bits used for side milling, etc. Premium quality: the spiral upcut router bits Made of solid carbide Tungsten steel, it is high-wearable and has a long life.
BrandEANOSIC #ad
ManufacturerEANOSIC #ad
Part NumberTungsten steel-3 inch

5. MLCS

#ad

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

#ad
MLCS #ad - Remove sawdust and wood chips from plunge cuts with upward shearing. Solid micro grain carbide cuts smooth and stays sharp. 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter. Perfect for deep mortises and cutting dadoes in a router table. 1/4-inch and 1/2-Inch shanks.
BrandMLCS #ad
ManufacturerMLCS #ad
Part Number200
Model200

6. Freud-Diablo

#ad

Freud 75-108 1/2-Inch Diameter 2-Flute Up Spiral Router Bit with 1/2-Inch Shank

#ad
Freud-Diablo #ad - Individually computer balanced. D 1/2", 2 flutes, cutting length h 1-1/4", 1/2" Shank. Overall dia. Kickback reducing design. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Precision ground for the smoothest cuts. Covered by Freud's limited lifetime warranty. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
BrandFreud-Diablo #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.23 Pounds
Width1 Inches
Part Number75-108
Model75-108

7. SpeTool

#ad

Carving, SpeTool Spiral Downcut Router Bits with 3/8 inch Cutting Diameter, 1/2 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut

#ad
SpeTool #ad - Industrial quality control to ensure best performance. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet.
BrandSpeTool #ad
Manufacturerspetool #ad
Part NumberSP-D3/8-1/2-D

8. Amana Tool

#ad

Amana Tool HSS1646 HSS Spiral Aluminum Cutting Double Flute Up-Cut 3/4 D x 1-1/4 CH x 1/2 SHK 3-1/4 Inch Long Router Bit

#ad
Amana Tool #ad - Specifications: direction: up-cut d diameter: 3/4 b cutting Height: 1-1/4 d Shank: 1/2 Overall Length L: 3-1/4 Flutes: 2.
BrandAmana Tool #ad
ManufacturerAmana Tool #ad
Weight0 Pounds
Part NumberHSS1646

9. Yonico

#ad

Yonico Router Bits Pattern Bit Solid Carbide Flush Trim Spiral 1/2-Inch Up-Cut 1/2-Inch Shank 31203-SC

#ad
Yonico #ad - Polished to a mirror finish from a solid carbide rod for precision & accuracy. Flush trim all types of material for a perfect finish. For use on table mount and handheld router. This heavy-duty solid carbide up-cut flush trim bit has a 1-1/4" cutting length with double guide bearings secured with a lock nut. 1/2" shank. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
BrandYonico #ad
ManufacturerYonico #ad
Part Number31203-SC

10. SpeTool

#ad

SpeTool O Flute UpCut 1/2 inch Carbide End Mill Single Flute Spiral CNC Router Bit 1/4 inch Shank Aluminum Acrylic Cutter

#ad
SpeTool #ad - The design of single flute, larger spiral chip space and Mirror Polishing of CNC Router Bit Makes Non-stick Crumbs, Smooth Cutting and Fast Chip-removal. There are 1 pieces of cnc router Bit In One Package, Coming with Storage Case. Solid carbide spiral router bit with 1/4inch shank and 1/4 inch Cutting Diameter, 1/2 inch Cutting Length, 2 inch for Total Length. Flat top with single flute, up cut, Material: HRC55 Carbide. Used for carving, nylon, abs, medium density board, milling, Cutting, hollow cutting in materials like Hardwood, Acrylic, PVC, MDF, Slotting, Resin, etc.
BrandSpeTool #ad
ManufacturerSpeTool #ad