Top 10 Tubing Cutter 1 to 1-1/8 – Tube Cutters

As an Amazon Associate I earn from qualifying purchases.

1. Ridgid

#ad

1/4-inch to 1-1/8-inch Tubing Cutter, RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle

#ad
Ridgid #ad - Featuring a 2-in-1 design, the tube cutter can be used alone or with the attachable, light and ergonomic ratchet handle. Tubing bender has an adjustable 1/4-inch to 1-1/8-inch 6 mm to 28 mm outside diameter capacity. Designed to cut hard and soft copper, aluminum and brass. Rugged and compact ratchet handle attaches to cutter for easier cutting in tight, restricted spaces; handle can be operated in ratchet steps as small as 10 degrees. Cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once.
BrandRidgid #ad
ManufacturerRidgid #ad
Height2 Inches
Length13 Inches
Weight1.1 Pounds
Width6.75 Inches
Part Number32573
Model118
WarrantyRIDGID branded tools are known the world over as best-in-class tools that allow the end-user to complete jobs more quickly and reliably. However, there's added peace of mind with the RIDGID Full Lifetime Warranty. Should your tool ever malfunction from defects in workmanship or materials, we will repair or replace the tool free of charge. RIDGID tools are warranted to be free of material and workmanship defects. This warranty lasts for the lifetime of the RIDGID tool. Warranty coverage ends when the product becomes unusable for reasons other than defects in workmanship or material. To obtain the benefit of this warranty, deliver the complete product via prepaid transportation to Ridge Tool Company, Elyria, Ohio, or any authorized RIDGID Independent Service Center. Pipe wrenches and other hand tools should be returned to the place of purchase. Warranted products will be repaired or replaced, at Ridge Tool's option, and returned at no charge; or, if after three attempts to repair or replace during the warranty period the product is still defective, you can elect to receive a full refund of your purchase price. Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. Ridge Tool shall not be responsible for any incidental or consequential damages. Some areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary, from state to state, province to province, or country to country. This Full Lifetime Warranty is the sole and exclusive warranty for RIDGID products.

2. Ridgid

#ad

Ridgid 31622 Model 150 Constant Swing Tubing Cutter, 1/8-inch to 1-1/8-inch Tube Cutter

#ad
Ridgid #ad - Tube cutter is made from high-strength zinc alloy and includes a spare cutter wheel in the knob. Innovative x-cel ball detent wheel pin allows quick, tool-free cutter wheel changes in seconds, with no lost clips. Designed with an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-flare cuts, and a fold-away reamer. Features a larger, more ergonomic X-CEL knob that provides a firmer grip so you can cut tubing quickly and easily. Cuts copper, brass, and aluminum tubing and thin-wall conduit from 1/8 inch to 1-1/8 inch 3 mm to 28 mm.
BrandRidgid #ad
ManufacturerRidgid Tool Company #ad
Height1.5 Inches
Length7.5 Inches
Weight1 Pounds
Width3.5 Inches
Part Number31622
Model31622
WarrantyRidgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

3. AIEASY

#ad

AIEASY MINI Steel Tube Cutter Tool, Cutting 3-28mm 1/8 inch to 1-1/8 inch Copper and Aluminum Tube Pipe

#ad
AIEASY #ad - The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure. Specially designed for small diameter tubes in confined spaces. Mainly used for soft and hard copper, aluminum, brass and cut plastic tubes. Metal pipe cutting tool with 3-28mm 1/8 inch to 1-1/8 inch cutting capacity. Anti-scratch electrostatic powder coating reduces the effects of static electricity during use.
BrandAIEASY #ad
ManufacturerQingdao Hemei Hardware Tools Co., Ltd. #ad

4. Ridgid

#ad

3/16-inch to 1-1/8-inch Tube Cutter Black/Silver, RIDGID 32920 Model 15 Screw Feed Tubing Cutter

#ad
Ridgid #ad - Tubing cutter has a 3/16-inch to 1-1/8-inch 5 mm to 28 mm cutting capacity. Large, ergonomic x-cel knob provides a firm grip so you can cut tubing quickly and easily. Easily executes clean, brass, square cuts on copper, aluminum and thin-wall steel. Features a convenient fold-away reamer to clean and insure a better connection.
BrandRidgid #ad
ManufacturerRidgid Tool Company #ad
Height1.81 Inches
Length8.5 Inches
Weight0.22 Pounds
Width3.82 Inches
Part Number32920
Model32920
WarrantyRidgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

5. Ridgid

#ad

1/4-inch to 1-1/8-inch Tube Cutter, RIDGID 86127 Model 118 Close Quarters Tubing Cutter

#ad
Ridgid #ad - Strong and lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts. Includes a self-feeding aUTOFEED cutter wheel that automatically cuts after tightening the knob only once. Specifically designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing. Model 118 features a special knob for easier tightening of the feedscrew and includes a spare cutter wheel in the knob. Tubing cutter has a 1/4-inch to 1-1/8-inch 6 mm to 28 mm cutting capacity.
BrandRidgid #ad
ManufacturerRidgid Tool Company #ad
Height1.25 Inches
Length6.75 Inches
Weight0.27 Pounds
Width5.5 Inches
Part Number86127
Model86127
WarrantyRidgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

6. Wostore

#ad

For Copper Aluminum PVC Plastic, Wostore Mini Pipe Tube Cutter 1/8 to 1-1/8 Inch Tubing Cutter

#ad
Wostore #ad - Ergonomic and easy to use: the corrugated knob also make it comfortable, stable to handle, clean and smooth in cutting. Adjustable depth & precise: tubing cutter has a cutting capacity from 1/8"-1-1/8"3-28MM.

Works well and making precise cuts. User manual: buy wostore pipe cutter, you can use it easily with user manual. Mainly used for cutting copper pipes in the air conditioner installation and vehicle repair. Versatile tools: cuts hard and soft copper, brass, aluminum, thin stainless steel, PE, PVC plastic tubing. Great for restricted spaces: Only 2 inch height; Specifically designed for using in tight and cramped spaces on small diameter tubing. Adjustable cutting depth designed for fast and safe cutting. We have confidence in the quality of our tubing cutter. Any question, please just contact us and we will make things right! .
BrandWostore #ad
ManufacturerWostore #ad
Height0.98 Inches
Length2.91 Inches
Weight0.28 Pounds
Width1.97 Inches
Part Number01102
Model01102

7. Flexzion

#ad

Brass, Plastic and More, Ideal for Cutting Copper, 1/8 to 1-1/8 inch Cutting Diameter w/ Reamer, Heavy Duty Tubing Pipe Cutter, Flexzion Tube Cutter, Aluminum, Steel

#ad
Flexzion #ad - Flip-out rimmer removes the lip or raised edge inside the pipe; Lightweight and compact form factor makes it easy to operate in confined spaces. Cutting diameter: 1/8 to 1-1/8 inch 3mm-28. 5mm; grooved rollers for close-to-flare cuts. Cuts cleanly with no thread. Applicable to copper, aluminum, stainless steel, PVC tube. High strength aluminum alloy construction; Enclosed feed screw prevents clogging or jamming. Ergonomic knob provides better grip, allowing you to easily control the cutting pressure.
BrandFlexzion #ad
ManufacturerFlexzion #ad
Height1.5 Inches
Length7.2 Inches
Weight0.59 Pounds
Width3.5 Inches
Part NumberTUB_CUT_CT274

8. Imperial

#ad

Imperial Tool TC1010 Hi-Duty Tube Cutter for 1/8" to 1 1/8" O.D. Stainless Steel Hard Temper Tubing

#ad
Imperial #ad - Rugged aluminum alloy body designed for handling ease. Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting action and trouble free operation.

Includes 2 s75046 cutter wheels for continuous cutting of stainless steel, monel and other hard-temper tubing. For 1/8" to 1-1/8" 4 mm to 28 mm o. D. Our high precision machining and construction method permits one-piece screw-type axle for easy access to cutter wheel – no clip to lose or replace. Foldaway hardened steel reamer with turned cutting edge removes inside burrs cleanly. Filing surface removes outside burrs. Tubing. Body is hand buffed and nickel chrome plated to a high-luster finish. Unique design eliminates spiraling for clean right angle cuts.
BrandImperial #ad
ManufacturerImperial Tools #ad
Height1 Inches
Length9 Inches
Width4 Inches
Part NumberTC1010
ModelTC1010

9. Imperial Tool

#ad

Imperial Tool TC1000 Hi-Duty Tube Cutter for 1/8" to 1 1/8" O.D. Tubing

#ad
Imperial Tool #ad - Filing surface removes outside burrs. Model number: TC1000 For 1/8" to 1-1/8" 4 mm to 28 mm O. D. Foldaway hardened steel reamer with turned cutting edge removes inside burrs cleanly. Tubing. Country of Origin: United States.
BrandImperial Tool #ad
ManufacturerImperial Tools #ad
Height1.5 Inches
Length5 Inches
Weight0.6 Pounds
Width2.25 Inches
Part NumberTC1000
ModelTC1000

10. Ridgid

#ad

Ridgid, CC247 RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter Silver

#ad
Ridgid #ad - Tubing cutter has a 1/4-inch to 1-1/8-inch 6 mm to 28 mm cutting capacity. Rollers include grooves for close-to-flare cuts. Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing. Includes spare cutter wheel in knob. Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts.
BrandRidgid #ad
ManufacturerRidgid Tool Company #ad
Height1 Inches
Length3.25 Inches
Weight0.49 Pounds
Width2 Inches
Part Number40617
Model40617
WarrantyRidgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool