As an Amazon Associate I earn from qualifying purchases.

1. Wheeler

#ad

Wheeler Engineering Roll Pin Starter Punch Set

#adWheeler #ad - Beveled tip for Starting the roll pin. 9-piece set 1/16" through 5/16". Fitted Nylon storage pouch. Hardened steel construction.

Brand	Wheeler #ad
Manufacturer	Battenfeld Technologies #ad
Height	2 Inches
Length	11 Inches
Weight	2 Pounds
Width	8 Inches
Part Number	710910
Model	710910

2. SEDY

#ad

SEDY 6-Pieces Roll Pin Starter Punch and Bolt Catch Install Punch Set, 5/64", 1/16", 1/8", 3/32"

#adSEDY #ad - This set is ideal for AR platform or trigger guard, gas block, and forward assist. 4pcs roll pin starter punches: 1/16", knurled steel handles for sure grip in every application, align and start the pin, you have all the sizes needed to build the AR lower and upper receivers.

This is a very cost-effective and special designed combo kit. Easy access to one hard to reach pin. Flat on one side for proper alignment without fear of damaging your gun. You can get all the sizes you need when you fix the AR project. Using hand tools may be dangerous, please keep the items away from children pay attention to your own safety. These pin punches are heat treated, workability, hardened and knurled steel for greater durability, drop forged and the electroplating process, and overall performance.

Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started, 1/8", 3/32", 5/64", finish driving it with an impact punch.2pcs blot catch install punches: 3/32", 5/32", one with counter-bored tips to start roll pins and one with indexing tips to finish roll pins.

Brand	SEDY #ad
Manufacturer	SEDY #ad
Height	0.25 Inches
Length	5 Inches
Width	1.5 Inches
Part Number	SDY-97780
Model	SDY-97780

3. Squirrel Daddy

#ad

Squirrel Daddy 3" Hollow End Roll Pin Starter Punch Set USA Made

#adSquirrel Daddy #ad - 4 pc hollow end starter punch set, hollow tip sizes are 1/8 5/32 3/16 7/32 wiil work with inch and metric pins. 3" overall length is longer than competitive punches, many uses and can be used for gunsmithing. Great addition to your tool box and will store easily next to a brass hammer. Professional grade starter punch has a precision tip for holding / starting roll pins. Non- impact made in the USA from American melt steel.

Brand	Squirrel Daddy #ad
Manufacturer	Squirrel Daddy #ad
Part Number	AZ20-243

4. GOTICAL

#ad

Gotical Gunsmithing Roll Pin Starter Punch Set

#adGOTICAL #ad - All sizes needed To Complete A Build. Shorter shaft starter punch gives you more control By Putting Your Hand Closer To the Pin, And Keeps User From Bending Roll Pins. A must-have for any AR builder or gunsmith for an easy installation effort. Four piece set, sizes include: 1/16″, 1/8″, 3/32″, & 5/64″. Designed to hold the pin when start punching to prevent accidental slip off.

Brand	GOTICAL #ad
Manufacturer	GOTICAL #ad
Part Number	TS-GT44

5. Maxmartt

#ad

4Pcs Steel Roll Pin Removal Set Punch Starter Hollow End Tool 1/16 5/64 3/32 1/8, Maxmartt Starter Punch Tool

#adMaxmartt #ad - Easy to assemble, There are multiple sizes for you to choose from. Made of high quality steel, strong and durable, Strong edge design, holds your tools firmly in the case. Manufactured to Punch Out Roll Pins for Re-Use. Special round nose punches Make Quick Work of those Stubborn Roll Pins Easy. Manufactured from steel - well Proportioned, Hardened and Properly Tempered, Have a Knurled Finger Grip.

Brand	Maxmartt #ad
Manufacturer	Maxmartt #ad
Height	1 Centimeters
Length	4 Centimeters
Width	10 Centimeters
Part Number	MAXPOWER-0920-692

6. SEDY

#ad

Brass, Roll Pin Starter Punch, Steel, SEDY 19-Pieces Gunsmithing Punch Set, Plastic Punches & Brass/Polymer Hammer. Red Storage Carring Case provided. Gunsmith's Dream Tool Kit

#adSEDY #ad - Brass/polymer hammer chrome plated steel hammer has nylon and brass heads to ensure strong, clean and tidy, but non-marring contact while in use.

2pcs sturdy plastics punch15/64", 3/8", used special treatment of plastic, they still have high hardness and density, they are special. All tools are neatly stored in the box, easy to store and carry. Made of brass for use with surfaces that may be damaged by steel punches. 8pcs brass roll pin punch 1/8", 5/32", 9/64", 3/16", 1/4", 7/32", 9/32" and 5/16".4pcs steel roll pin punch2 each of 1/16" and 3/32", they are the strongest. 4pcs roll pin starter punch1/16", 1/8", 3/32", 5/64", you have all the sizes needed to build the AR lower and upper receivers.

Brand	SEDY #ad
Manufacturer	SEDY #ad
Height	2 Inches
Length	9 Inches
Width	6.3 Inches
Part Number	JS-UK Screen-1616
Model	Huawei Mate 20 PRO

7. GOTICAL

#ad

Gunsmithing Roll Pin Starter Punch Set Tool

#adGOTICAL #ad - 4-piece starter roll pin punch set - Size are 1/16 5/54 3/32 1/8. Made of heated treated steel with black finish. Designed to hold the pin when start punching to prevent accidental slip off. A must-have for any AR builder or gunsmith for an easy installation effort.

Brand	GOTICAL #ad
Manufacturer	GOTICAL #ad
Part Number	1-AB-Roll

8. JDAMALEYWO

#ad

JDAMALEYWO Roll Pin Starter Punch Set Hollow End Stainless Steel

#adJDAMALEYWO #ad - Made of high quality stainless steel for durability, processability and overall performance. Use hollow end punches to align and start the pin then finish driving it home with an impact punch. Suitable for the including trigger guard, gas block, and forward assist. 4-piece hollow roll pin starter punch set - size are 1/8”, 5/32”, 3/16”, 7/32”. Knurled steel handles for sure grip in every application, prevent damage caused by an accidental slip off while getting the pin started.

Brand	JDAMALEYWO #ad
Manufacturer	JDAMALEYWO #ad
Part Number	43239-132371
Model	43239-132371

9. Wheeler

#ad

Wheeler 110128 Master Roll Pin Punch Set

#adWheeler #ad - Storage: comes in molded plastic case to keep everything organized and in one place. Includes: 9 piece ball profile roll pin punch set with 5/16", 1/8", 7/32", 3/32", 5/32", 1/4", 3/16", 5/64" and 1/16". Features: 9 piece roll pin starter set with 5/16", 3/16", 7/32", 1/8", 5/32", 3/32", 1/4", 5/64" and 1/16". Comprehensive kit: combines the roll pin Starter set and the ball profile roll pin punch set with a gun smithing hammer. Reliable: comes with small dual-sided hammer for precise control.

Brand	Wheeler #ad
Manufacturer	Battenfeld Technologies #ad
Height	2 Inches
Length	9 Inches
Width	6 Inches
Part Number	110128
Model	110128

10. Grip

#ad

Grip 9 pc Gunsmithing Roll Pin Starter Punch Set

#adGrip #ad - Sizes: 1/16”, 1/4”, 3/32”, 7/32”, 1/8”, 3/16”, 5/32”, 5/64”, 5/16”. Includes roll-up storage pouch. Beveled tip to provide proper alignment of the roll pin in the punch while gunsmithing. Drop forged, heat treated steel.

Brand	Grip #ad
Manufacturer	Grip #ad
Part Number	61133