Top 10 PSI Woodworking Lathe – Power Wood Lathes

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking KWL-1018VS Turncrafter Commander 10" Variable Speed Midi Lathe

#ad
PSI Woodworking #ad - Tailstock & spindle bore 3/8". Headstock thread 1" x 8tpi. Kwl-1018vs replaces tclc10vs. Swing over Bed 10". Two belt positions: 500-2000 rpm & 1500-3600 RPM. Cast iron base. Quill travel 1-5/8". Headstock/tailstock Taper #2MT. Powered by 3/4 hp variable speed high performance motor110v & an SBC microprocessor. See description below for all of the included parts. Distance between Centers 18". 24 indexing positions with spindle locking. Convenient built-in handles. Etl listed and certified by Intertek.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height17 Inches
Length32 Inches
Weight82 Pounds
Width9 Inches
Part NumberKWL-1018VS
ModelKWL-1018VS
Warranty3 years

2. PSI Woodworking

#ad

PSI Woodworking LCHSS8 Wood Lathe 8pc HSS Chisel Set

#ad
PSI Woodworking #ad - Great for woodworkers woodturners and penturners of all skill levels. Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles. Set includes 8 chisels 3/16" parting tool 5/8" spear scraper 1" skew chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge. Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes. Includes wooden case for storage and carrying.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height13.5 Inches
Length18 Inches
Width2 Inches
Part NumberLCHSS8
ModelLCHSS8
Warranty2 Years Under Normal Use

3. PSI Woodworking

#ad

PSI Woodworking LBUFFSYS 3-Step Lathe Buffing System

#ad
PSI Woodworking #ad - This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock.

Replacement wheels and buffing compound bars are available; tripoli: bar lbuffx1 & linen/Flannel Wheel LBUFFW2; Carbuba Wax: Bar LBUFFX3 & linen wheel lbufFW1; White Diamond: Bar LBUFFX2 & Flannel Wheel LBUFFW3. Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center. For best results, pre-treat your workpiece with danish oil. System includes: 1 #2mt 16" heavy duty mandrel, flannel, 3 8" fabric buffing wheels Linen, hardware packet, Linen/Flannel Combo, Carnuba Wax, 3 buffing compound bars Tripoli, White Diamond, and instructions.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height3 Inches
Length17.5 Inches
Weight7.21 Pounds
Width9.75 Inches
Part NumberLBUFFSYS
ModelLBUFFSYS
Warrantytwo years

4. PSI Woodworking

#ad

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

#ad
PSI Woodworking #ad - 5" diameter and weighs 4 lbs. Barracuda2 chuck body is 3. Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter. 1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4".

With the variety of included jaws, other small turning projects, pens, The CSC3000C will mount most turning projects onto your Lathe; including bowls, spindles, and much more. This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, Set of 2 Alligator Jaws LCALJAWS, Pen Blank Drilling Jaws CJAWPEN, 8-1/4" Super Finishing Jaws CJAWXL, 5" Small Flat Jaws CJAWFJ1, and more!. Includes: 1 barracuda2 chuck body, 4 self-centering jaw sets, 1 woodworm screw chuck, 1 gear key, 8 screws, 1 Allen wrench, 1 spindle adapter, 1 storage case.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
ModelCSC3000C
Warranty2 Years Under Normal Use

5. PSI Woodworking

#ad

PSI Woodworking CF3SC 3" Lathe Faceplate/Screwchuck for 1" x 8tpi Spindle

#ad
PSI Woodworking #ad - 3" steel faceplate with screw chuck. Combination of screw chuck & faceplate mount provides a very safe & secure bowl turning setup. Includes 2 1" screw chucks and 8 spare mounting screws. 4 mounting holes with additional screw chuck option. Pre-threaded to 1" x 8TPI.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height3 Inches
Length3 Inches
Weight1.39 Pounds
Width2 Inches
Part NumberCF3SC
ModelCF3SC
Warranty2 years under normal use

6. PSI Woodworking

#ad

PSI Woodworking LSR3 Wood Lathe Steady Rest

#ad
PSI Woodworking #ad - Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2". Compatible with jet, Delta, and Turncrafter Pro Midi lathes with extension beds. Mounts in the channel of any split bed or double rail lathe. 3-point ball bearing spindle support. Non marring soft wheels.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height12.75 Inches
Length9 Inches
Weight8.49 Pounds
Width1.75 Inches
Part NumberLSR3
ModelLSR3
Warranty2 Years Under Normal Use

7. PSI Woodworking

#ad

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT

#ad
PSI Woodworking #ad - The #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more. Removes easily with knock out bar. This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories. Includes the 1/2" drill chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberTM32
ModelTM32
Warranty2 Years Under Normal Use

8. PSI Woodworking

#ad

PSI Woodworking CJAWXL 8-1/4" Flat Jaws for PSI C-Series Lathe Woodturning Chucks

#ad
PSI Woodworking #ad - Ideal for finishing and polishing woodturning bowl and plate bottoms. Cjawxl is a psi c-series accessory that is compatible with all psi c-series chucks CSC3000C, CSC3500SE, CMG3C, CUG3418CC, CSC2000C. Cjawxl repaces both cjawfj1 and CJAWFJ2. Grips workpieces from 2-3/4" to 8-1/4" diameter; 7 positions for bowl rim placement; Made from cast aluminum; Weighs 1. 50 pounds. Includes 16 soft rubber gripper bumper pins in two lengths to securely hold your workpiece: 8 1/2" & 8 3/4"; Pins have a 6mm thread; Also includes Allen Wrench.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Weight1.5 Pounds
Part NumberCJAWXL
ModelCJAWXL
Warranty2 Years Under Normal Use

9. PSI Woodworking

#ad

PSI Woodworking LA341018 Lathe Headstock Spindle Adapter 3/4" x 10tpi to 1" x 8tpi

#ad
PSI Woodworking #ad - Wrench not included. Convert a 3/4" x 10tpi lathe headstock spindle to 1" x 8tpi. Flats allow for solid wrench tool grip for tightening and loosening from spindle. Allows a 3/4" x 10tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories. Made of steel; weighs. 85 pounds; extends spindle length approximately 1-1/2".
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height2.5 Inches
Length4.5 Inches
Weight0.85 Pounds
Width2.5 Inches
Part NumberLA341018
ModelLA341018
Warranty2 Years Under Normal Use

10. PSI Woodworking

#ad

PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center

#ad
PSI Woodworking #ad - Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied. The psi super center crown compatible with headstocks with #2MT spindles. Ships in plastic production sleeves at 4. 8-ounces. 4. 5-by-1. 5-by-1. 5-inches with 1-inch crown. Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height1.5 Inches
Length4.5 Inches
Weight0.55 Pounds
Width1.5 Inches
Part NumberLCENTSS22
ModelLCENTSS22
Warranty2 year limited warranty