As an Amazon Associate I earn from qualifying purchases.







Adjustable tether of its 10-foot pvc jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch.
Honeywell micro switch ensures a high-precision sump pump switch with accurate repeatability and extended life. Control water flow into and out of tanks and valves with a sump pump float switch by Water Boss. Non-corrosive casing of the water boss float for water tanks and bilge pumps is IP68 rated. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals.


1. Sump Alarm
#ad
6 Foot 18/2 Piggyback Float Switch/Sump Pump Control Cord
#adSump Alarm #ad - 6' piggyback power cord used for control of pumps or motors. Suitable for indoor and outdoor use. Nema 5-15m / 5-15r to rOJ Connection. Permitted to carry 10 amp Load @ 120 Volts per NEC. Carries rohs, ul, CSA Certification.More information #ad
Brand | Sump Alarm #ad |
Manufacturer | Sump Alarm, inc. #ad |
Weight | 0.7 Pounds |
Part Number | PC-PB-6-18-2 |
More information #ad
2. PumpSpy
#ad
PumpSpy Sump Pump Tethered Float Switch, 10' Cord
#adPumpSpy #ad - Includes hose clamp and cord grip for easy installation onto the pump's discharge pipe. Universal replacement for most tether switch applications. 10 foot power cord with piggyback plug for ease of installation. Suitable for use with Sump, Sewage, or Effluent Pumps. Rated for up to 15 amps.More information #ad
Brand | PumpSpy #ad |
Manufacturer | Raybend #ad |
Weight | 1.13 Pounds |
Model | TS-100 |
More information #ad
3. Little Giant
#ad
15-Ft. Cord, Pump Down Piggyback Tethered Float Switch for Pond, 599117, Grey, Effluent or Sewage Systems, Sump, Maximum 13-Amp, 1/2 HP, Little Giant RFSN-9 115-Volt
#adLittle Giant #ad - Cord length: 15-foot cord with piggyback plug; pumping range 7 inches to 36 inches. Applications: water resistant pump down tethered float switch for sump, sewage, effluent systems, ponds or utility pumps; allows pumps to start/stop automatically; adjustable.More information #ad
Temperature rating: maximum liquid temperature 140 degrees F. Limitations: 05 hp, 13 amp maxumim pump run current; 85 Amp maximum pump start current; use only with pumps equipped with integral thermal overload protection. Listings: ur, csa listed in the USA; Made in USA.Brand | Little Giant #ad |
Manufacturer | Little Giant #ad |
Height | 4.13 Inches |
Length | 3.04 Inches |
Weight | 1.5 Pounds |
Width | 3.04 Inches |
Part Number | 599117 |
Model | 599117 |
Warranty | 1 year manufacturer |
More information #ad
4. PumpSpy
#ad
10' Cord, PumpSpy Sump Pump Vertical Float Switch
#adPumpSpy #ad - Universal replacement comes completely assembled and ready to mount on pump discharge pipe. 10' long power cord with a piggyback plug for easy installation and replacement. Ideal replacement for sump, sewage, and effluent applications. Rated for up to 1 Million Cycles for ultimate reliability.More information #ad
Brand | PumpSpy #ad |
Manufacturer | Raybend #ad |
Weight | 1.17 Pounds |
Model | VS-100 |
More information #ad
5. Sump Alarm
#ad
Septic System, 5 Year Warranty, Sump Pump, Water Tank, 10 ft Cable, "WaterBoss" Universal Piggyback Float Switch
#adSump Alarm #ad - 5 year Warranty. Direct connection of Sump Pump - Pumps to Empty. Temperature ratings from 32f to 140F, and rated to IP68, with CE & IEC approvals. 3 meters 10 feet of cable, Cable Ties, and Piggyback Connector. Rated up to 13 amps or 1/2 HP.More information #ad
Brand | Sump Alarm #ad |
Manufacturer | Sump Alarm, Inc #ad |
Height | 3.25 Inches |
Length | 6.5 Inches |
Weight | 0.75 Pounds |
Width | 1.5 Inches |
Part Number | SA-3100-10 |
Model | SA-3100-10 |
More information #ad
6. briidea
#ad
Briidea Hi-Lo Sump Pump Controller with Dual Float Switch and Overload Protection White
#adbriidea #ad - Long life and small size, no moving parts in pit ensures reliability and is used in various application scenarios, stable and safe. With adjustable position dual float switch, you can turn on/turn off your pump levels from 1/2'' to 20' effectively and precisely according to your actual needs, extends your pump life.More information #ad
Compatible with all sump pump and Utility pumpBrand | briidea #ad |
Manufacturer | briidea #ad |
More information #ad
7. Nxtop
#ad
Water Tank, Nxtop 4M Cable Float Switch Water Level Controller for Tank Pump Sump Pump
#adNxtop #ad - The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. Working temperature: 0°c~60°c; control range: 02m; electrical endurance: 50, 000 times Contacts: NO+NC.More information #ad
Note: please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. Does not have a plug on end. Product name: float Switch Water Level Controller. Rated current/voltage: ac 108a 250v~104a 380V; Recommended Voltage: DC 24V.Brand | Nxtop #ad |
Manufacturer | Nxtop #ad |
More information #ad
8. Sump Alarm
#ad
10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps, Float Switch for Sump Pump
#adSump Alarm #ad - 5-year warranty against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F.Adjustable tether of its 10-foot pvc jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch.
More information #ad
This float level switch helps reduce overflow potential of light to medium amounts of suspended solids. This reliable float switch yields big savings in flood repair costs. Honeywell micro switch ensures a high-precision sump pump switch with accurate repeatability and extended life. Control water flow into and out of tanks and valves with a sump pump float switch by Water Boss. Non-corrosive casing of the water boss float for water tanks and bilge pumps is IP68 rated. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals.
Brand | Sump Alarm #ad |
Manufacturer | Sump Alarm, Inc #ad |
Height | 6.5 Inches |
Length | 1.5 Inches |
Weight | 1.1 Pounds |
Width | 3.25 Inches |
Part Number | 2359-3 |
Model | 2359-3 |
More information #ad
9. Little Giant
#ad
Little Giant RS-5LL 115-Volt Piggyback Low On/Off Level Diaphragm Pump-down Switch, Black, 599019, 25-Ft. Cord
#adLittle Giant #ad - Easy installation: equipped with a piggyback plug for easy installation; just plug the pump's plug into the back of the switch plug. Low on/off level: pump actives when water reaches 2. 5 inches and shuts off when whater falls to 1-inch +/- 05 inches.More information #ad
Specifications: 25-foot power cord; 115-volt; maximum 10 amps running, 1/3 HP; CSA listed in the USA; 3. 031 inches x 1. 7 inches x 4. 75 inches high. Compact design: ideal for confined spaces. Applications: converts manual pumps up to 1/3 HP to automatic operation; low level switch is ideal for utility pumps.Brand | Little Giant #ad |
Manufacturer | Little Giant #ad |
Height | 4.75 Inches |
Length | 1.7 Inches |
Weight | 1.75 Pounds |
Width | 3.03 Inches |
Part Number | 599019 |
Model | 599019 |
Warranty | 1 year manufacturer |
More information #ad
10. TEMCo Industrial
#ad
TEMCo Float Switch for Sump Pump & Water Level NO/NC Control Function 13ft Cord 5 Year Warranty CN0359
#adTEMCo Industrial #ad - Features a reliable high quality German-made Cherry brand switch. 5 year guarantee against any manufacturing defects. Usable for potable water. 13 ft cord with adjustable counterweight accommodates most applications.More information #ad
Ip68 rating. Works on most 1/2 HP or smaller pumps. See circuit Diagram in Gallery. Polypropylene plastic casing, neoprene rubber cord. Dual function fill or Empty Operation. 1 year no-questions-asked return policy. 16 amp max, 120/220 vac rated.Brand | TEMCo Industrial #ad |
Manufacturer | TEMCo #ad |
Part Number | CN0359 |
More information #ad