As an Amazon Associate I earn from qualifying purchases.
Mikov #ad - The blade has a dual-bevel spear point tip. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The blade is 5-7/8 inches long, 1/2 inch wide and. 100 inch thick. If a handle is desired the kit comes with 2 brass pins to affix the scales to the blade.
Maker. The dual bevel will mark distinct lines equally well on both the right and left side of a part or guide. The knife can be used either unhandled or wood scales can be attached to make a handle. The bevels are precision ground on CNC machines.
This unhandled dual bevel spear point marking knife kit was made to our specifications by Mikov a world-class Czech knife maker. This is the same steel used in many of Mikov’s kitchen knives and is designed to take and hold a keen edge and resist corrosion. The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The tip is ground to 55 degrees with a 25-degree angle grind on both bevels.
BIG HORN #ad - This knife can draw a much finer line than an awl or pencil. Double beveled for both right and left hand Scribing. Blade is beveled on one side only to keep the cut absolutely tight to your rule or square. Defines an exact line for starting a chisel or saw blade.
Narex #ad - The bevels are precision ground on CNC machines. If a handle is desired the kit comes with 2 brass pins to affix scales to the blade. The knife can be used either unhandled or wood scales can be attached to create a handle. This dual bevel spear point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic.
The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to hrc 57. Scribe lines left by a marking knife can also locate and guide chisels and saws.
The tip is ground to 55 degrees with a 25-degree grind on both bevels. The dual bevel will mark distinct lines on both the right and left side of a part or guide. A marking knife is an invaluable tool that should be in the toolbox of every woodworker. The blade has a dual-bevel spear point tip. It will leave crisp lines when marking with and against the grain and on end grain. The blade is 5-7/8 inches long, 1/2 inch wide and come in 3 thicknesses: 0
Mikov #ad - The blade is 5-7/8 inches long, 1/2 inch wide and 0060 inch thick. This unhandled dual bevel spear point marking knife kit was made to our specifications by Mikov a world-class Czech knife maker. This is the same steel used in many of Mikov’s kitchen knives and is designed to take and hold a keen edge and resist corrosion.
The blade has a dual-bevel spear point tip. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794.
The laser cut finger indents are useful for applying pressure closer to the tip. The bevels are precision ground on CNC machines. If a handle is desired the kit comes with 2 brass pins to affix the scales to the blade. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794. The dual bevel will mark distinct lines equally well on both the right and left side of a part or guide. The tip is ground to 55 degrees with a 25-degree angle grind on both bevels.
Mudder #ad - Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork.
Size: the blade length is 2. 4 cm/ 094 inches and the handle is 11. 5 cm/ 4. 53 inches long, the total length is 13. 9 cm/ 5. 47 inches, easy to hold on for you. Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses optional, not included; This dovetail marking knife comes peaked and can be additionally honed to make it more pointed.
Cautious: the blade is pointed; remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem. Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use.
KAKURI #ad - The handy portable size is convenient for camping and outdoor as well. Official english instruction: KAKURI Official English instruction is included. Japanese kiridashi marking knife: kiridashi knife is a japanese hand-forged utility knife for woodworking, deburring, bamboo craft, marking, paper cutting, leathercraft, pencil sharpening, whittling, and so on.
This is the ultimate knife for professional carpenters and DIYers alike to use for a long time.
You can use it for a lifetime by sharpening the blade. Razor sharp japanese steel: only japanese high-grade steel is used. Beautiful hand-hammered design: non-slip body with a beautiful forged hammered pattern. Blacksmith hammers it one by one. The blade is razor-sharp and durable, and you can restore the sharpness by sharpening with a whetstone. Product specifications: made in japan / size: 07"×7. 3"×01" / blade Width: 0
Narex #ad - Double bevel sharpened at 20 degrees and tip ground to 55 degrees. Blade made from highly allowed Mn-V steel and heat treated to HRc 61. Blade length is 1.
Narex #ad - This dual bevel spear point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements.
The bevels are precision ground on CNC machines. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The blade is 1-7/8 inches long, 1/2 inch wide and comes in 3 thicknesses, 0030", 0060" or 0100 inch thick.
The handle is 3/8-inch-thick and made from mexican rosewood which has been hand sanded and polished. A marking knife is an invaluable tool that should be in the toolbox of every woodworker. The laser cut finger indents are useful for applying pressure closer to the tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to hrc 57.
Mudder #ad - Cautious: the blade is pointed; remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem.
Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses optional, not included; This dovetail marking knife comes peaked and can be additionally honed to make it more pointed.
Size: the blade length is 2. 4 cm/ 094 inches and the handle is 11. 5 cm/ 4. 53 inches long, the total length is 13. 9 cm/ 5. 47 inches, easy to hold on for you. Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use.
Swann Morton #ad - Comes with 5 smo1 razor sharp hardened carbon steel craft blades. Dovetail marking knife craft knife made in Sheffield England by leader in surgical instrument manufacturing. Blade is.
1. Mikov
#adMikov V2003013 Unhandled Dual Bevel Marking Knife Kit 0.100 Inch Thick Blade 1/2 Inch Wide 5-7/8 Inch Long Stainless Steel Hardened to HRC 57 h Wide 5-7/8 Inch Long Stainless Steel Hardened to HRC 57
#adMaker. The dual bevel will mark distinct lines equally well on both the right and left side of a part or guide. The knife can be used either unhandled or wood scales can be attached to make a handle. The bevels are precision ground on CNC machines.
More information #ad
It will leave crisp lines marking with and against the grain and on end grain. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794. This unhandled dual bevel spear point marking knife kit was made to our specifications by Mikov a world-class Czech knife maker. This is the same steel used in many of Mikov’s kitchen knives and is designed to take and hold a keen edge and resist corrosion. The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The tip is ground to 55 degrees with a 25-degree angle grind on both bevels.
| Brand | Mikov #ad |
| Manufacturer | Mikov #ad |
| Part Number | V2003013 |
| Model | V2003013 |
More information #ad
2. BIG HORN
#adSmall, Big Horn 19061 Marking / Striking / Scribing Knife Red
#adMore information #ad
| Brand | BIG HORN #ad |
| Manufacturer | Big Horn Corp. #ad |
| Height | 0.8 Inches |
| Length | 7 Inches |
| Weight | 0.1 Pounds |
| Width | 0.8 Inches |
| Part Number | 19061 |
| Model | 19061 |
More information #ad
3. Narex
#adNarex Unhandled Dual Bevel Marking Knife Kit with Finger Indents Stainless Steel Blade 0.060" Thick Blade
#adThe blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to hrc 57. Scribe lines left by a marking knife can also locate and guide chisels and saws.
More information #ad
This steel is a traditional knife steel and designed to take and hold a keen edge and resist corrosion. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The dual bevel will mark distinct lines on both the right and left side of a part or guide. A marking knife is an invaluable tool that should be in the toolbox of every woodworker. The blade has a dual-bevel spear point tip. It will leave crisp lines when marking with and against the grain and on end grain. The blade is 5-7/8 inches long, 1/2 inch wide and come in 3 thicknesses: 0
| Brand | Narex #ad |
| Manufacturer | Mikov #ad |
| Height | 1 Inches |
| Length | 6 Inches |
| Weight | 0.13 Pounds |
| Width | 1 Inches |
| Part Number | V2004070NX |
More information #ad
4. Mikov
#adMikov V2003014 Unhandled Thin Blade Dual Bevel Marking Knife Kit with Finger Indents 0.060 Inch Thick Blade 1/2 Inch Wide 5-7/8 Inch Long Stainless Steel Hardened to HRC 57
#adThe blade has a dual-bevel spear point tip. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794.
More information #ad
The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The knife can be used either unhandled or wood scales can be attached to make a handle. The laser cut finger indents are useful for applying pressure closer to the tip. The bevels are precision ground on CNC machines. If a handle is desired the kit comes with 2 brass pins to affix the scales to the blade. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794. The dual bevel will mark distinct lines equally well on both the right and left side of a part or guide. The tip is ground to 55 degrees with a 25-degree angle grind on both bevels.
| Brand | Mikov #ad |
| Manufacturer | Mikov #ad |
| Height | 1 Inches |
| Length | 6 Inches |
| Width | 1 Inches |
| Part Number | V2003014 |
| Model | V2003014 |
More information #ad
5. Mudder
#adMarking Knife Woodworking Marking Knife Thin Blade Dual Double Bevel Striking Knife Hardened Mn-V Steel Heat Treated Striking Marking Knife 2 Pieces
#adSize: the blade length is 2. 4 cm/ 094 inches and the handle is 11. 5 cm/ 4. 53 inches long, the total length is 13. 9 cm/ 5. 47 inches, easy to hold on for you. Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses optional, not included; This dovetail marking knife comes peaked and can be additionally honed to make it more pointed.
More information #ad
Cautious: the blade is pointed; remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem. Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use.
| Brand | Mudder #ad |
| Manufacturer | Mudder #ad |
| Height | 0.79 Inches |
| Length | 7.09 Inches |
| Width | 2.36 Inches |
| Part Number | Mudder-Woodworking Carving Knife-01 |
More information #ad
6. KAKURI
#adProfessional Razor Sharp Hand Forged Japanese Carbon Steel Blade Hammered Pattern for Woodworking, Made in JAPAN, Whittling, KAKURI Kiridashi Knife Right Hand 18mm, Wood Carving, Marking
#adThis is the ultimate knife for professional carpenters and DIYers alike to use for a long time.
More information #ad
All kakuri brand products are manufactured in Japan and handcrafted by Japanese professional craftsmen. It is also used for bonsai bonsai knife and garden trees as a grafting tool in Japan. You can use it for a lifetime by sharpening the blade. Razor sharp japanese steel: only japanese high-grade steel is used. Beautiful hand-hammered design: non-slip body with a beautiful forged hammered pattern. Blacksmith hammers it one by one. The blade is razor-sharp and durable, and you can restore the sharpness by sharpening with a whetstone. Product specifications: made in japan / size: 07"×7. 3"×01" / blade Width: 0
| Brand | KAKURI #ad |
| Manufacturer | KAKURI #ad |
| Height | 0.1 Inches |
| Length | 7.3 Inches |
| Weight | 0.11 Pounds |
| Width | 0.7 Inches |
| Part Number | K-185 |
| Model | K-185 |
More information #ad
7. Narex
#adNarex Dual Double Bevel Striking Marking Knife with Blade from Hardened Mn-V Steel Heat Treated to HRc 61 822301
#adMore information #ad
5" long and handle is 5. 25" long, overall length is 6. 75". Marking/striking knife is manufactured by small and highly respected edge tool maker in Czech Republic. Blade is. 125" thick and. 580" wide.| Brand | Narex #ad |
| Manufacturer | Narex #ad |
| Part Number | 822301 |
| Model | 822301 |
More information #ad
8. Narex
#adNarex Dual Bevel Marking Knife Stainless Steel Blade Rosewood Handle Finger Indents 0.060" Thick Blade
#adThe bevels are precision ground on CNC machines. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The blade is 1-7/8 inches long, 1/2 inch wide and comes in 3 thicknesses, 0030", 0060" or 0100 inch thick.
More information #ad
The dual bevel will mark distinct lines on both the right and left side of a part or guide. The handle makes the perfect size for a nimble yet stout marking knife. The handle is 3/8-inch-thick and made from mexican rosewood which has been hand sanded and polished. A marking knife is an invaluable tool that should be in the toolbox of every woodworker. The laser cut finger indents are useful for applying pressure closer to the tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to hrc 57.
| Brand | Narex #ad |
| Manufacturer | Mikov #ad |
| Height | 1 Inches |
| Length | 6 Inches |
| Weight | 0.13 Pounds |
| Width | 1 Inches |
| Part Number | V2004070NX |
More information #ad
9. Mudder
#adMarking Knife Woodworking Marking Knife Thin Blade Dual Double Bevel Striking Knife Hardened Mn-V Steel Heat Treated Striking Marking Knife 6 Pieces
#adBuilt to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses optional, not included; This dovetail marking knife comes peaked and can be additionally honed to make it more pointed.
More information #ad
Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork. Size: the blade length is 2. 4 cm/ 094 inches and the handle is 11. 5 cm/ 4. 53 inches long, the total length is 13. 9 cm/ 5. 47 inches, easy to hold on for you. Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use.
| Brand | Mudder #ad |
| Manufacturer | Mudder #ad |
| Height | 0.63 Inches |
| Length | 5.71 Inches |
| Width | 4.72 Inches |
| Part Number | Mudder-Marking Knife-01 |
More information #ad
10. Swann Morton
#adRetractable, Dovetail Marking Knife, 5 Extra Blades, Thin Blade, Craft Knife, Cast Iron Handle, Swann Morton SMO-R
#adMore information #ad
028” thick and. 410” wide and projects 1 3/8” from handle. Used by amateurs and professional craftsman worldwide to perform delicate and precise cutting tasks on wide range of materials. Heavy duty cast iron handle with retractable blade for added safety.| Brand | Swann Morton #ad |
| Manufacturer | Swann Morton #ad |
| Height | 1 Inches |
| Length | 5 Inches |
| Width | 1 Inches |
| Part Number | SMO-R |
| Model | SMO-R |
More information #ad
