As an Amazon Associate I earn from qualifying purchases.
Sanchamy #ad - Adjustable leveling feet the shaft of this furniture leg is 1. 77 inch long with 3/8'' thread which is universally used in American Made Furniture. For furniture legs with existing 3/8''-16 thread, simply screw in the leg leveler to adjust the height. Packing list you'll receive 8 packs of heavy duty furniture Levelers, 8 Packs of Felt Pads, 8 Packs of T-nuts, 32 Pcs of Screws and 1 small Wrench.
Easy to install pre-drill a hole with a diameter of 05 inch on the furniture leg, then insert the t-nuttightened with a hammerwith mounting screws, screw in the leg levelers to your desired position to complete the adjustment. If it is a metal leg, you need to weld a 3/8'' threaded insert first, and then install the leveling feet.
With a 1-3/8'' diameter and 1/2''thick metal base, it can support fully adjustable height from 3/4'' to 1-3/4'' for maximum support and adjustability according to your needs. Protect your floors beside stop shaking and reduce vibration on uneaven floors, these heavy duty furniture leveling feet are also equipped with a felt pad for the base to avoid direct contact between the furniture legs and the ground, protecting the floor, tile or carpet from damage or scratches. No noise will be heard while moving or sliding the furniture.
POWERTEC #ad - For set of four. Per caster, 2200 lbs. Easy to use via integrated adjusting nut built into the shaft itself; tighten with 13mm wrench not included.
Bolt body dimension: 3/8”-16 by 2; pad dia 1-3/8”; tapered threaded insert is a nominal 1” high; can be used in a wide variety of older furniture as replacement Legs If they have corresponding internal measurements.
Pehciroe #ad - Wide application}: the leveling feet adjustable can be used on any furniture leg to help it level the same height, and sofas. Diameter 1/2” thick base and fully adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. And for furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height.
No matter at home or workplace that needs to be leveled or adjusted, chairs, such as tables, kitchen cabinets, it can be quickly solved by this furniture leveler. The 3mm thickness felt pad with heavy-duty self-adhesive perfectly protects the floor. Clever installation}: first drill a hole with a width of 055 inches, use a hammer to hammer in the inserted t-nut, and then screw the leg leveler to the desired position to complete the adjustment.
Adjustable furniture feet; adjustable feet levelers; large furniture levelers; heavy duty table leg levelers; chair leg levelers; self leveling table feet. Package included}: 4 × t- nut kit, 3/8”-16 thread. 4 × 01'' thickness Felt Pads. Premium material}: our adjustable feet are made of high-quality heavy-duty iron materials, corrosion resistance, and the surface is sprayed with matte anti-rust paint, making the heavy-duty adjustable feet have a classic appearance, with strong load-bearing capacity, one can hold up to 300 pounds, and long service life.
twig #ad - Universalthis adjustable furniture leveling feet uses the most common 3/8" thread in the U S. The height of the four furniture legs can also be adjusted according to needs, 4 pcs for use, protect the floor, the adjustment range is between 1"to 2". Contains 8 pcs furniture pads, 4 pcs for replacement after dirty.
Install you need to drill a hole with a diameter of 1/2" and a depth greater than 1-1/2" on the furniture leg with an electric drill, then insert the T- nut tightened with a hammer and screw in the leg levelers. If it is a metal leg, you need to weld a 3/8" threaded insert first, and then install the leveling feet.
Functionavoid direct contact between the furniture legs and the ground, tile or carpet from damage. It can be screwed into all 3/8" threaded inserts and is widely used in various furniture brands, Stickley, such as Costco, Bernhardt, Thomasville, etc. Notethe maximum load of this product is 1320lb, such as bar table, recommended for large or heavy furniture with leg diameter greater than 1-1/2", storage cabinet, chest of drawers and so on.
Singtan Store #ad - Each leveler can be adjusted 3/4 inch in height. Minimum height: 025". Easy installation & fits to all furnitures why buying new table or chair from the shop when you can use our levelers pads to renew your furniture’s at home.
Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced. This product is recommended by furniture manufactu. If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.
Not only for furnitures – our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Singtan Store levelers to fix your balancing problems and ENJOY high quality of products. Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product. Thread size is 3/8-16 and threads are one inch long.
Kiboko #ad - Weight rating is 125 lbs per Leg, 500 lbs per set. Hex nut at the base of the leveler can be turned for Height Adjustment, Max Height from Floor Surface is 2 1/2", Minimum Height: 5/8". Pivoting base 1 1/2" wide, 5 degrees to Work on any Floor, with Plastic Glide Pad.
HanKun #ad - Support heavy furniture the furniture levelers includes a lock nut to lock and stabilize the straightener and can support heavy furniture. Beautiful and anti rust silver appearance bright, steel nickel plated cover shell abrasion resistance, elegant white bottom, corrosion resistance.
Drag mute scratch proof bottom 1. 26inch/3. 2cm wide made of tpr rubber like, when dragging heavy furniture, easy to push without noise and scratch residue.
Singtan Store #ad - Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product. Dimensions and details-the base measures 1. 5" in diameter. Not only for furnitures – our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Singtan Store levelers to fix your balancing problems and ENJOY high quality of products.
If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.
Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced. Minimum height: 025". 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. Thread size is 3/8-16 and threads are one inch long. This product is recommended by furniture manufactu. Each leveler can be adjusted 3/4 inch in height. Maximum height: 1.
Singtan Store #ad - Easy installation & fits to all furnitures why buying new table or chair from the shop when you can use our levelers pads to renew your furniture’s at home. Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced.
Maximum height: 1. 25". This product is recommended by furniture manufactu. Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product.
Dimensions and details-the base measures 1. 5" in diameter. Thread size is 3/8-16 and threads are one inch long. 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. Each leveler can be adjusted 3/4 inch in height. If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.
KALOPEZY #ad - Composed of 1-3/4”*3/8” screws and 1-3/8”*1/2” round bottom, the total height is 2-3/8”. It has the characteristics of anti-wear, durability and sturdiness. Easy to installfor furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height.
Adjustable furniture leveling feet can adjust the height of the four feet of the furniture, so that the furniture can reach the height you want. The height of the furniture can be adjusted from 3/4” to 1-3/4" for maximum support and adjustability. High-quality materialsthe leveling feet are made of high-quality heavy-duty iron materials, with strong load-bearing capacity, and the surface is sprayed with matte anti-rust paint.
Equipped with 8 thick black felts, it can protect the floor from scratches and no noise when moving the home. Adjustable t-nut kitthe adjustable table feet can adjust the height of the furniture to meet your needs. If you have any questions, you can contact us at any time, we will contact you soon. The set includes you will receive a set of 8 black adjustable table legs. We will provide you with high-quality products so that you can buy the good things you like.
1. Sanchamy
#adHeavy Duty Furniture Levelers 3/8''-16 Thread w/ T-Nut Kit Furniture Leveling Feet Adjustable Furniture Levelers for Tables,Cabinets,Chairs,Workbench,Sofa and More,Large Base Supports 2640LBs-8 Packs
#adEasy to install pre-drill a hole with a diameter of 05 inch on the furniture leg, then insert the t-nuttightened with a hammerwith mounting screws, screw in the leg levelers to your desired position to complete the adjustment. If it is a metal leg, you need to weld a 3/8'' threaded insert first, and then install the leveling feet.
More information #ad
Support heavy furniture this commercial quality heavy duty furniture leveler comes with strong steel T-nut to lock and stablize the straightener, each can support max 330LBs, beds, sofa, a set of 8 supports furniture weight 2640LBs! Fits for heavy furniture such as cabinets, workbench, tables, chairs and more. With a 1-3/8'' diameter and 1/2''thick metal base, it can support fully adjustable height from 3/4'' to 1-3/4'' for maximum support and adjustability according to your needs. Protect your floors beside stop shaking and reduce vibration on uneaven floors, these heavy duty furniture leveling feet are also equipped with a felt pad for the base to avoid direct contact between the furniture legs and the ground, protecting the floor, tile or carpet from damage or scratches. No noise will be heard while moving or sliding the furniture.
| Brand | Sanchamy #ad |
| Manufacturer | Sanchamy #ad |
| Height | 2.3 Inches |
| Length | 1.4 Inches |
| Width | 1.4 Inches |
| Part Number | Furniture Leveler T-Nut-Black |
| Model | Furniture Leveler T-Nut-Black |
More information #ad
2. POWERTEC
#adWhite, 4PK, POWERTEC 71189 3/8”-16 Furniture Levelers with Threaded Inserts
#adBolt body dimension: 3/8”-16 by 2; pad dia 1-3/8”; tapered threaded insert is a nominal 1” high; can be used in a wide variety of older furniture as replacement Legs If they have corresponding internal measurements.
More information #ad
Level body constructed of rugged carbon steel; threaded Insert is made of zinc for RUST/wear resistance; non-marring footpads feature pa nylon construction for easy glide-ability and durability; Chrome plating on the foot pad provides an attractive, Polished look. Ideal for lifting/leveling/stabilizing your heavier furniture. 4pk; weight capacity: 550 lbs.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1.5 Inches |
| Length | 4 Inches |
| Width | 3 Inches |
| Part Number | 71189 |
| Model | 71189 |
More information #ad
3. Pehciroe
#adT Nut Levelers Table Adjustable Feet 3/8-16 Thread 4 Pack, Heavy Duty Adjustable Legs for Furniture, Black, Adjustable Feet Levelers, Large Furniture Levelers
#adNo matter at home or workplace that needs to be leveled or adjusted, chairs, such as tables, kitchen cabinets, it can be quickly solved by this furniture leveler. The 3mm thickness felt pad with heavy-duty self-adhesive perfectly protects the floor. Clever installation}: first drill a hole with a width of 055 inches, use a hammer to hammer in the inserted t-nut, and then screw the leg leveler to the desired position to complete the adjustment.
More information #ad
Flexible adjustment}: the heavy-duty furniture leg levelers help to adjust the height of the furniture without affecting the appearance, so as to adjust the balance or increase the height. Adjustable furniture feet; adjustable feet levelers; large furniture levelers; heavy duty table leg levelers; chair leg levelers; self leveling table feet. Package included}: 4 × t- nut kit, 3/8”-16 thread. 4 × 01'' thickness Felt Pads. Premium material}: our adjustable feet are made of high-quality heavy-duty iron materials, corrosion resistance, and the surface is sprayed with matte anti-rust paint, making the heavy-duty adjustable feet have a classic appearance, with strong load-bearing capacity, one can hold up to 300 pounds, and long service life.
| Brand | Pehciroe #ad |
| Manufacturer | Pehciroe #ad |
| Height | 2.1 Inches |
| Length | 2.1 Inches |
| Width | 1.4 Inches |
| Part Number | VLQ0114-4|AMUS |
| Model | VLQ0114-4|AMUS |
More information #ad
4. twig
#ad3/8'' UNC Thread Leveling Feet Adjustable Furniture Levelers Screw in Threaded,Heavy Duty Leg Levelers Screw on with Threaded Inserts for Table,Cabinet,Sofa,Chair Raiser4 Sets/Large Base/Black
#adInstall you need to drill a hole with a diameter of 1/2" and a depth greater than 1-1/2" on the furniture leg with an electric drill, then insert the T- nut tightened with a hammer and screw in the leg levelers. If it is a metal leg, you need to weld a 3/8" threaded insert first, and then install the leveling feet.
More information #ad
If less than this size, side table, there is a risk of cracking during installation. If you have any questions, please send an email, we will reply and deal with it within 24 hours. Serviceour company has provided services for various furniture brands for a long time, the product quality is credible. Functionavoid direct contact between the furniture legs and the ground, tile or carpet from damage. It can be screwed into all 3/8" threaded inserts and is widely used in various furniture brands, Stickley, such as Costco, Bernhardt, Thomasville, etc. Notethe maximum load of this product is 1320lb, such as bar table, recommended for large or heavy furniture with leg diameter greater than 1-1/2", storage cabinet, chest of drawers and so on.
| Brand | twig #ad |
| Manufacturer | TWIG #ad |
| Height | 2.5 Inches |
| Length | 1.5 Inches |
| Width | 1.5 Inches |
| Part Number | TWIG-23686898 |
| Model | TWIG-56898 |
More information #ad
5. Singtan Store
#adSINGTAN Furniture Levelers with Screw-in Nuts-4 Pack| Furniture Feet | Heavy Duty Adjusting Foot | 1" Adjustable Furniture Legs | table Levelers | chair Levelers,3/8"-16 Threaded bolt, thread pitch:16
#adOur materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced. This product is recommended by furniture manufactu. If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.
More information #ad
Dimensions and details-the base measures 1. 5" in diameter. Maximum height: 1. 25". 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. Not only for furnitures – our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Singtan Store levelers to fix your balancing problems and ENJOY high quality of products. Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product. Thread size is 3/8-16 and threads are one inch long.
| Brand | Singtan Store #ad |
| Manufacturer | Singtan Store #ad |
| Height | 1.5 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
More information #ad
6. Kiboko
#adAdjustable Leveling Feet for Furniture, T-Nut Leg Leveler Set of 4, Workbenches, 500 lb. Load Capacity, Tables
#adMore information #ad
3/8"-16 thread three prong t-nuts, slot and hex combo on the Top of the Leveler for Adjusting, 7/16" Barrel Diameter of T-nut. Set of 4 - 3" leg levelers with t-nuts, medium Duty, 3/8" - 16 thread, Engineering Details and Instructions Included.| Brand | Kiboko #ad |
| Manufacturer | Kiboko LLC #ad |
| Height | 1.5 Inches |
| Length | 6 Inches |
| Weight | 0.41 Pounds |
| Width | 4 Inches |
| Part Number | LA38 3 SCT3816 |
| Model | LA38 3 SCT3816 |
More information #ad
7. HanKun
#adHeavy Duty Furniture Legs for Cabinets or Tables to Adjust Height of LegsSet of 4, HanKun Adjustable Furniture Leveling Feet Furniture Leveler Tee Nut Kit 3/8-16 Inch Thread Size
#adDrag mute scratch proof bottom 1. 26inch/3. 2cm wide made of tpr rubber like, when dragging heavy furniture, easy to push without noise and scratch residue.
More information #ad
Balance furniture the bottom of the leveling feet is welded to the screw, which can not only bear the heavy furniture but also level off the uneven furniture easily. Easy to install use the 9/16 drill to drill a 4064 mm/1. 6 inch deep hole, put the leveler into the triangle nut, turn the leveler to the desired height.| Brand | HanKun #ad |
More information #ad
8. Singtan Store
#adSINGTAN 1.5" Base Furniture Levelers Without T-Nut,Pack of 4 | Furniture Feet | Heavy Duty Adjusting Foot | 1" Adjustable Furniture Legs,Table Levelers,Chair Levelers 3/8" Bolt without Nut,Pack of 4
#adIf for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.
More information #ad
Easy installation & fits to all furnitures why buying new table or chair from the shop when you can use our levelers pads to renew your furniture’s at home. Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced. Minimum height: 025". 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. Thread size is 3/8-16 and threads are one inch long. This product is recommended by furniture manufactu. Each leveler can be adjusted 3/4 inch in height. Maximum height: 1.
| Brand | Singtan Store #ad |
| Manufacturer | Singtan Store #ad |
| Height | 1.25 Inches |
| Length | 1.5 Inches |
| Width | 1.5 Inches |
More information #ad
9. Singtan Store
#adThread Pitch:16, SINGTAN Furniture Levelers with Screw-in Nuts-8 Pack| Furniture Feet | Heavy Duty Adjusting Foot | 1" Adjustable Furniture Legs | Table Levelers | Chair Levelers,3/8"-16 Threaded Bolt
#adMaximum height: 1. 25". This product is recommended by furniture manufactu. Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product.
More information #ad
Minimum height: 025". Not only for furnitures – our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Singtan Store levelers to fix your balancing problems and ENJOY high quality of products. Dimensions and details-the base measures 1. 5" in diameter. Thread size is 3/8-16 and threads are one inch long. 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. Each leveler can be adjusted 3/4 inch in height. If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.
| Brand | Singtan Store #ad |
| Manufacturer | Singtan Store #ad |
| Height | 1.5 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
More information #ad
10. KALOPEZY
#adFurniture Levelers,8 Pieces Adjustable Feet Levelers, Black T- Nut Kit 3/8”-16 Thread Heavy Duty Furniture Leg Levelers for Table Legs Furniture Feet Cabinets Sofa Tables Chairs Raiser
#adAdjustable furniture leveling feet can adjust the height of the four feet of the furniture, so that the furniture can reach the height you want. The height of the furniture can be adjusted from 3/4” to 1-3/4" for maximum support and adjustability. High-quality materialsthe leveling feet are made of high-quality heavy-duty iron materials, with strong load-bearing capacity, and the surface is sprayed with matte anti-rust paint.
More information #ad
Also your satisfaction is very important to us. Or, pre-drill a 055 inch wide hole and insert the t-nut for universal installation, screw in the leg levelers and adjust to the suitable height. Equipped with 8 thick black felts, it can protect the floor from scratches and no noise when moving the home. Adjustable t-nut kitthe adjustable table feet can adjust the height of the furniture to meet your needs. If you have any questions, you can contact us at any time, we will contact you soon. The set includes you will receive a set of 8 black adjustable table legs. We will provide you with high-quality products so that you can buy the good things you like.
| Brand | KALOPEZY #ad |
| Manufacturer | KALOPEZY #ad |
More information #ad
