Top 10 Leveling Feet 3/8-16 – Furniture Legs

As an Amazon Associate I earn from qualifying purchases.

1. Sanchamy

#ad

Heavy Duty Furniture Levelers 3/8''-16 Thread w/ T-Nut Kit Furniture Leveling Feet Adjustable Furniture Levelers for Tables,Cabinets,Chairs,Workbench,Sofa and More,Large Base Supports 2640LBs-8 Packs

#ad
Sanchamy #ad - Packing list you'll receive 8 packs of heavy duty furniture Levelers, 8 Packs of T-nuts, 8 Packs of Felt Pads, 32 Pcs of Screws and 1 small Wrench. Adjustable leveling feet the shaft of this furniture leg is 1. 77 inch long with 3/8'' thread which is universally used in American Made Furniture. Easy to install pre-drill a hole with a diameter of 05 inch on the furniture leg, and then install the leveling feet.

With a 1-3/8'' diameter and 1/2''thick metal base, it can support fully adjustable height from 3/4'' to 1-3/4'' for maximum support and adjustability according to your needs. Protect your floors beside stop shaking and reduce vibration on uneaven floors, protecting the floor, these heavy duty furniture leveling feet are also equipped with a felt pad for the base to avoid direct contact between the furniture legs and the ground, tile or carpet from damage or scratches. No noise will be heard while moving or sliding the furniture.

For furniture legs with existing 3/8''-16 thread, screw in the leg levelers to your desired position to complete the adjustment. If it is a metal leg, you need to weld a 3/8'' threaded insert first, then insert the T-nuttightened with a hammerwith mounting screws, simply screw in the leg leveler to adjust the height. Support heavy furniture this commercial quality heavy duty furniture leveler comes with strong steel T-nut to lock and stablize the straightener, workbench, a set of 8 supports furniture weight 2640LBs! Fits for heavy furniture such as cabinets, each can support max 330LBs, beds, sofa, tables, chairs and more.
BrandSanchamy #ad
ManufacturerSanchamy #ad
Height2.3 Inches
Length1.4 Inches
Width1.4 Inches
Part NumberFurniture Leveler T-Nut-Black
ModelFurniture Leveler T-Nut-Black

2. POWERTEC

#ad

White, POWERTEC 71189 3/8”-16 Furniture Levelers with Threaded Inserts, 4PK

#ad
POWERTEC #ad - Ideal for lifting/leveling/stabilizing your heavier furniture. Easy to use via integrated adjusting nut built into the shaft itself; tighten with 13mm wrench not included.

Bolt body dimension: 3/8”-16 by 2; pad dia 1-3/8”; tapered threaded insert is a nominal 1” high; can be used in a wide variety of older furniture as replacement Legs If they have corresponding internal measurements. Level body constructed of rugged carbon steel; threaded Insert is made of zinc for RUST/wear resistance; non-marring footpads feature pa nylon construction for easy glide-ability and durability; Chrome plating on the foot pad provides an attractive, Polished look. 4pk; weight capacity: 550 lbs. For set of four. Per caster, 2200 lbs.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height1.5 Inches
Length4 Inches
Width3 Inches
Part Number71189
Model71189

3. Pehciroe

#ad

Large Furniture Levelers, Black, Heavy Duty Adjustable Legs for Furniture, Adjustable Feet Levelers, T Nut Levelers Table Adjustable Feet 3/8-16 Thread 4 Pack

#ad
Pehciroe #ad - 4 × 01'' thickness Felt Pads. No matter at home or workplace that needs to be leveled or adjusted, such as tables, chairs, kitchen cabinets, it can be quickly solved by this furniture leveler. Wide application}: the leveling feet adjustable can be used on any furniture leg to help it level the same height, and sofas.

Flexible adjustment}: the heavy-duty furniture leg levelers help to adjust the height of the furniture without affecting the appearance, so as to adjust the balance or increase the height. Clever installation}: first drill a hole with a width of 055 inches, and then screw the leg leveler to the desired position to complete the adjustment. The 3mm thickness felt pad with heavy-duty self-adhesive perfectly protects the floor. Adjustable furniture feet; adjustable feet levelers; large furniture levelers; heavy duty table leg levelers; chair leg levelers; self leveling table feet. Package included}: 4 × t- nut kit, 3/8”-16 thread.

Premium material}: our adjustable feet are made of high-quality heavy-duty iron materials, with strong load-bearing capacity, making the heavy-duty adjustable feet have a classic appearance, one can hold up to 300 pounds, and the surface is sprayed with matte anti-rust paint, corrosion resistance, and long service life. And for furniture legs with existing 3/8"-16 thread, use a hammer to hammer in the inserted t-nut, simply screw in the leg leveler to adjust the height. Diameter 1/2” thick base and fully adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability.
BrandPehciroe #ad
ManufacturerPehciroe #ad
Height2.1 Inches
Length2.1 Inches
Width1.4 Inches
Part NumberVLQ0114-4|AMUS
ModelVLQ0114-4|AMUS

4. twig

#ad

3/8'' UNC Thread Leveling Feet Adjustable Furniture Levelers Screw in Threaded,Heavy Duty Leg Levelers Screw on with Threaded Inserts for Table,Cabinet,Sofa,Chair Raiser4 Sets/Large Base/Black

#ad
twig #ad - Serviceour company has provided services for various furniture brands for a long time, please send an email, the product quality is credible. If you have any questions, we will reply and deal with it within 24 hours. It can be screwed into all 3/8" threaded inserts and is widely used in various furniture brands, Thomasville, such as Costco, Stickley, Bernhardt, etc.

Functionavoid direct contact between the furniture legs and the ground, 4 pcs for use, the adjustment range is between 1"to 2". Contains 8 pcs furniture pads, tile or carpet from damage. Universalthis adjustable furniture leveling feet uses the most common 3/8" thread in the U S. If less than this size, side table, storage cabinet, such as bar table, there is a risk of cracking during installation. The height of the four furniture legs can also be adjusted according to needs, protect the floor, 4 pcs for replacement after dirty.

Notethe maximum load of this product is 1320lb, recommended for large or heavy furniture with leg diameter greater than 1-1/2", chest of drawers and so on. If it is a metal leg, you need to weld a 3/8" threaded insert first, and then install the leveling feet. Install you need to drill a hole with a diameter of 1/2" and a depth greater than 1-1/2" on the furniture leg with an electric drill, then insert the T- nut tightened with a hammer and screw in the leg levelers.
Brandtwig #ad
ManufacturerTWIG #ad
Height2.5 Inches
Length1.5 Inches
Width1.5 Inches
Part NumberTWIG-23686898
ModelTWIG-56898

5. Singtan Store

#ad

SINGTAN Furniture Levelers with Screw-in Nuts-4 Pack| Furniture Feet | Heavy Duty Adjusting Foot | 1" Adjustable Furniture Legs | table Levelers | chair Levelers,3/8"-16 Threaded bolt, thread pitch:16

#ad
Singtan Store #ad - Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product. If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.

Thread size is 3/8-16 and threads are one inch long. Minimum height: 025". Each leveler can be adjusted 3/4 inch in height. Dimensions and details-the base measures 1. 5" in diameter. Maximum height: 1. 25". Not only for furnitures – our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Singtan Store levelers to fix your balancing problems and ENJOY high quality of products.

Easy installation & fits to all furnitures why buying new table or chair from the shop when you can use our levelers pads to renew your furniture’s at home. Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced. 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. This product is recommended by furniture manufactu.
BrandSingtan Store #ad
ManufacturerSingtan Store #ad
Height1.5 Inches
Length1 Inches
Width1 Inches

6. Kiboko

#ad

Adjustable Leveling Feet for Furniture, T-Nut Leg Leveler Set of 4, Workbenches, Tables, 500 lb. Load Capacity

#ad
Kiboko #ad - Hex nut at the base of the leveler can be turned for Height Adjustment, Max Height from Floor Surface is 2 1/2", Minimum Height: 5/8". Weight rating is 125 lbs per Leg, 500 lbs per set. 3/8"-16 thread three prong t-nuts, slot and hex combo on the Top of the Leveler for Adjusting, 7/16" Barrel Diameter of T-nut. Pivoting base 1 1/2" wide, 5 degrees to Work on any Floor, with Plastic Glide Pad. Set of 4 - 3" leg levelers with t-nuts, medium Duty, 3/8" - 16 thread, Engineering Details and Instructions Included.
BrandKiboko #ad
ManufacturerKiboko LLC #ad
Height1.5 Inches
Length6 Inches
Weight0.41 Pounds
Width4 Inches
Part NumberLA38 3 SCT3816
ModelLA38 3 SCT3816

7. HanKun

#ad

Heavy Duty Furniture Legs for Cabinets or Tables to Adjust Height of LegsSet of 4, HanKun Adjustable Furniture Leveling Feet Furniture Leveler Tee Nut Kit 3/8-16 Inch Thread Size

#ad
HanKun #ad - Easy to install use the 9/16 drill to drill a 4064 mm/1. 6 inch deep hole, put the leveler into the triangle nut, turn the leveler to the desired height. Drag mute scratch proof bottom 1.

26inch/3. 2cm wide made of tpr rubber like, when dragging heavy furniture, easy to push without noise and scratch residue. Beautiful and anti rust silver appearance bright, elegant white bottom, steel nickel plated cover shell abrasion resistance, corrosion resistance. Support heavy furniture the furniture levelers includes a lock nut to lock and stabilize the straightener and can support heavy furniture. Balance furniture the bottom of the leveling feet is welded to the screw, which can not only bear the heavy furniture but also level off the uneven furniture easily.
BrandHanKun #ad

8. Singtan Store

#ad

SINGTAN 1.5" Base Furniture Levelers Without T-Nut,Pack of 4 | Furniture Feet | Heavy Duty Adjusting Foot | 1" Adjustable Furniture Legs,Table Levelers,Chair Levelers 3/8" Bolt without Nut,Pack of 4

#ad
Singtan Store #ad - Minimum height: 025". Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product. Not only for furnitures – our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Singtan Store levelers to fix your balancing problems and ENJOY high quality of products.

This product is recommended by furniture manufactu. Easy installation & fits to all furnitures why buying new table or chair from the shop when you can use our levelers pads to renew your furniture’s at home. Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced.

Dimensions and details-the base measures 1. 5" in diameter. If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND. Maximum height: 1. 25". Thread size is 3/8-16 and threads are one inch long. Each leveler can be adjusted 3/4 inch in height. 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product.
BrandSingtan Store #ad
ManufacturerSingtan Store #ad
Height1.25 Inches
Length1.5 Inches
Width1.5 Inches

9. Singtan Store

#ad

SINGTAN Furniture Levelers with Screw-in Nuts-8 Pack| Furniture Feet | Heavy Duty Adjusting Foot | 1" Adjustable Furniture Legs | Table Levelers | Chair Levelers,3/8"-16 Threaded Bolt, Thread Pitch:16

#ad
Singtan Store #ad - 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. This product is recommended by furniture manufactu. Each leveler can be adjusted 3/4 inch in height. Easy installation & fits to all furnitures why buying new table or chair from the shop when you can use our levelers pads to renew your furniture’s at home.

Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced. Maximum height: 1. 25". If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND. Protection-dependability, quality, and customer satisfaction were first on our minds when manufacturing this product.

Not only for furnitures – our levelers can ne use in any application where you want to balance up, from Garage tables to garden benches etc’, ORDER NOW Singtan Store levelers to fix your balancing problems and ENJOY high quality of products. Thread size is 3/8-16 and threads are one inch long. Minimum height: 025". Dimensions and details-the base measures 1.
BrandSingtan Store #ad
ManufacturerSingtan Store #ad
Height1.5 Inches
Length1 Inches
Width1 Inches

10. KALOPEZY

#ad

Black T- Nut Kit 3/8”-16 Thread Heavy Duty Furniture Leg Levelers for Table Legs Furniture Feet Cabinets Sofa Tables Chairs Raiser, Furniture Levelers,8 Pieces Adjustable Feet Levelers

#ad
KALOPEZY #ad - Buy with confidenceit is our responsibility to provide high-quality furniture feet. It has the characteristics of anti-wear, durability and sturdiness. Or, screw in the leg levelers and adjust to the suitable height. Also your satisfaction is very important to us. We will provide you with high-quality products so that you can buy the good things you like.

The set includes you will receive a set of 8 black adjustable table legs. If you have any questions, you can contact us at any time, we will contact you soon. Composed of 1-3/4”*3/8” screws and 1-3/8”*1/2” round bottom, the total height is 2-3/8”. The height of the furniture can be adjusted from 3/4” to 1-3/4" for maximum support and adjustability. High-quality materialsthe leveling feet are made of high-quality heavy-duty iron materials, with strong load-bearing capacity, and the surface is sprayed with matte anti-rust paint.

Adjustable furniture leveling feet can adjust the height of the four feet of the furniture, so that the furniture can reach the height you want. Easy to installfor furniture legs with existing 3/8"-16 thread, pre-drill a 055 inch wide hole and insert the t-nut for universal installation, simply screw in the leg leveler to adjust the height. Equipped with 8 thick black felts, it can protect the floor from scratches and no noise when moving the home. Adjustable t-nut kitthe adjustable table feet can adjust the height of the furniture to meet your needs.
BrandKALOPEZY #ad
ManufacturerKALOPEZY #ad