Top 10 GX24q to E26 – Light Sockets

As an Amazon Associate I earn from qualifying purchases.

1. Bonlux

#ad

Bonlux 6-pack Gx24q to E26/E27 Socket Adapter, Gx24 Short 4 Pin to Medium Edison Lamp Base Converter, Rewire/Remove/Bypass the Ballast is Required

#ad
Bonlux #ad - If there is a ballast connected at your fixture, please dismantle the ballast before install the LED light, otherwise the ballast will make resonance high voltage which can destroy the light. Easily transfer your gx24 fixture to fit any of the E26/E27 standard medium base light bulbs.

It has the short version 4-pins and is suitable and compatible with 4 pin g24q-1, GX24Q-1, GX24Q-2, G24Q-2, G24Q-3, GX24Q-3 Please confirm what base you need before you buy. Even you are replacing with e26/e27 cfl, you need to remove the ballast! Otherwise, the CFL E26/e27 Lamp will be flickering or not even turn on! Please consult an electrician if you are unsure. Do not operate the led bulb with a ballast in the fixture. The base depth of this product is 15mm/059 inches.

Save you a lot of troubles and money to replace your original Halogen CFL lighting fixtures. Attention buyers: rewiring & removing/bypassing the ballast at the light fixture is required for these adapters to function properly. Doing so will likely cause the bulb flickering and EVEN SMOKING!! This lamp base converter doesn't change any voltage or current. Note: it is 100% that PL-C downlight fixture has ballast inside.
BrandBonlux #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.04 Inches
Weight5 ounces
Width3.14 Inches

2. Luxvista

#ad

Gx24q to E26 Adapter, 10-Pack, Luxvista Gx24q to E26 Lamp Base Converter, G24Q to E26/E27 4 Pin CFL Lamp Base Converter, Remove Bypass the Ballast

#ad
Luxvista #ad - Features - gx24q to medium edison e26/e27 adapter converter, 4 pin gx24 base, dimension: H 5. 6cm * w 8cm 2. 28 * 3. 14 inches. No ballast - ballast need to be removed or bypassed.

Compatible base - suit for all cfl 4 pin gx24 base, gx24q-1, g24q-2, gx24q-2, G24Q-3, compatible with 4 Pin G24Q-1, GX24Q-3 Please confirm what base you need before you buy. High temperature resistant - Anti-burning PBT material and anti-aging enable more safty in your life. Easy installation - twist into existing GX24Q socket and it immediately transforms your fixture to fit any standard E26/E27 medium screw base bulb. If you have not remove or bypass ballast, it will damage the bulb or cause filckering.
BrandLuxvista #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.28 Inches
Width2.28 Inches
Part Number818

3. E-Simpo

#ad

10pcs E-Simpo 4Pin Gx24q CFL to E26/E27 Lamp Base Socket Adapter Converter. Need Rewire to Bypass Ballast. 10-Pack

#ad
E-Simpo #ad - So the led driver input should be 100V-240V or 85-265V, and easily destroy the led lamp. There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast. All pin-based cfl, but all screw-in e26 e27 are lamp-ballast integrated.

So the best thing is bypass or remove once we want to change CFL to LED Lamp. The ballast in your fixture must be removed or bypassed for these adapters to function properly. This is 4p, not for 2p;need bypass or remove the ballast, otherwise, it doesn't light on. Ballast is a must to start a high voltage600v-1500v 1ms to light up the cfl, so 600-1500v will be too high, like gx24q G24 GX23 G23 are lamp-ballast separated, but it is dangerous for LED Lamp. Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs.

Consult an electrician if you are unsure. G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. When we remove pin-based cfl, there will be 2 ballasts, the ballast is still working in front fixture; even we change to E26/E27 CFL, we only removed the lamp, the light will not work.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height2.3 Inches
Length1.5 Inches
Weight0.05 Pounds
Width1.5 Inches
Part NumberGX24Q-E26

4. E-Simpo

#ad

Gx24q to E26 Adapter,Lamp Holder Converter, 15-Pack 4P Gx24q to E26 Lamp Base Converter,15.5mm G24Q to E26/e27, Rohs,Need Bypass Ballast.

#ad
E-Simpo #ad - There are some led driver who can be compatible with the ballast, there will be 2 ballasts, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, no LED Driver can be compatible with all the ballast. So the led driver input should be 100v-240v or 85-265V, but all screw-in E26 E27 are lamp-ballast integrated.

So the best thing is bypass or remove once we want to change CFL to LED Lamp. Ballast is a must to start a high voltage600v-1500v 1ms to light up the CFL, so 600-1500V will be too high, and easily destroy the led lamp. All pin-based cfl, like gx24q g24d gx24d gx23 g23 are lamp-ballast separated, but it is dangerous for led lamp. Because led lamp are built with leds and driver which is transforming the 100-240v AC to DC for LEDs.

When we remove pin-based CFL, the light will not work. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. The ballast in your fixture must be removed or bypassed for these adapters to function properly. This is 4p, not for 2p;need bypass or remove the ballast, otherwise, it doesn't light on. G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. Consult an electrician if you are unsure.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height1.5 Inches
Length1.5 Inches
Weight0.88 Pounds
Width2.31 Inches
Part NumberG24-E26
ModelGX24Q to E26 Light Socket Adapter
Warranty1 year for the lamp holder, but don't blame the converter if
1. You don't bypass the ballast when your e26 lamp is not compatible with the ballast;
2. The socket is not gx24q or g24q, whose 4 holes has contact and 2 holes at one side are mutually connected or all 4 holes has wires out, one side, 2 holes' wires go to l, the other side goes to n.

5. E-Simpo

#ad

Must Bypass Ballast to Avoid Flick Smoke Burn 6pcs E-Simpo 4Pin Conductive Gx24q to E26/E27 Lamp Base Adapter Short G24q to Medium Edison Light Socket Converter Replace CFL PL GX24Q Holder

#ad
E-Simpo #ad - To bypass this ballast, the ballast has a black and white wire on the input side, cut all the Input and output wires, 2 Blue to White wire. All pin-based cfl is ballast-lamp separated, E26/E27 bulbs are self-ballast. Consult an electrician if you are unsure. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb.

All pin-based cfl, but all screw-in e26 e27 are lamp-ballast integrated. So the led driver input should be 100v-240v or 85-265v, like gx24q g24 gx23 g23 are lamp-ballast separated, so 600-1500V will be too high, and easily destroy the led lamp. Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs. Ballast is a must to start a high voltage600v-1500v 1ms to light up the cfl, but it is dangerous for led lamp. This is 4p short 15.

5mm gx24q base, and connect 2 red to black, not for 2p;not for diy!!! need rewiring/bypass/ remove the ballast, two red and two blue output side. But no led driver can be compatible with all ballast. Ballast is there consuming power, So the Professional doing is bypass it. The ballast in your fixture must be removed or bypassed for these adapters to function properly. There are led bulbs with driver compatible with the ballast, cause high temperature which will damage LED Bulb, which you may find work without bypass ballast.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q to E26/E27 Adapter

6. E-Simpo

#ad

4pcs E-Simpo 4-Pin GX24Q to E26/E27 Light Socket Adapter Need Bypass Ballast CFL G24Q 4P Lamp Base to Standard LED E26 e27 Lamp Base Holder Converter PBT Housing Rohs

#ad
E-Simpo #ad - Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs. The ballast in your fixture must be removed or bypassed for these adapters to function properly. Consult an electrician if you are unsure. 4pcs.

4pin gx24q, not for 2p; need bypass or remove the ballast, all phenom like smell smoke flicker burnt are caused by ballast which is not required for LED Lamps. So the led driver input should be 100v-240v or 85-265v, like g24d Gx24d GX24Q GX23 G23 are lamp-ballast separated, and easily destroy the led lamp. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. Works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w quad tube;gx24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube.

G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. Ballast is a must to start a high voltage600v-1500v 1ms to light up the cfl, so 600-1500v will be too high, but it is dangerous for LED Lamp. All pin-based cfl, but all screw-in e26 e27 are lamp-ballast integrated.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q-E26

7. E-Simpo

#ad

Need Bypass BallastGX24Q-3 to E26/E27 CFL Bulb Socket Adapter 6pcs E-Simpo 4-Pin GX24Q G24Q to Standard Medium Bulb Holder Base Converter

#ad
E-Simpo #ad - No ballast is required. Home or commercial use, Suitable for less than 100W. 6pcs. Short version 4-pins: q series has a shorter tip than d series, g24q-2. G24q-3, suitable for g24q-1, gx24q-2, gx24q-1, gx24q-3 socket;works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple Tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube;.

With base depth 15. 5mm/06 inches. Dismantle ballast before install the led light, hot, reviews like burnt, otherwise the ballast will make resonance high voltage which destroy the light, smell, flicking are all results that not bypass the ballast correctly. Need rewiring!!! not for diy, two red and two blue output side.

Material: anti-burning pbt, copper contact. To bypass this ballast, and connect 2 red to black, cut all the input and output wires, please install it only with QUALIFIED ELECTRICIAN!!! BYPASS/ REMOVE the ballast, the ballast has a black and white wire on the input side, 2 Blue to White wire. It is 100% that pl-c downlight fixture has ballast inside. 4pin gx24q or g24q to e26/e27 light socket adapter. Please make sure the lamp base type before you buy, DON'T Mix with other 2P 4P socket.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
ModelGX24Q-E26

8. E-Simpo

#ad

2pcs E-Simpo 4Pin Gx24q to E26/E27 Light Socket Adapter Lamp Base Converter. NOT PLUG AND PLAY, Need Rewire to Bypass Ballast. 2-Pack

#ad
E-Simpo #ad - So the best thing is bypass or remove once we want to change CFL to LED Lamp. Doing so will likely damage the bulb. 2pcs/lot, sample pack. When we remove pin-based cfl, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.

Do not operate the led bulb with ballast in the fiXTURE. Physically change the socket contact, twist into existing gx24q socket and transform the fixture to fit any standard E26 E27 medium size bulb. But mostly gx24q cfls are with an electronic ballast inside, burnt, which will cause the LED bulb flickering, hot or smell, and damage the electrical parts inside the bulb.

Not for diy!!! need rewiring! removing or bypassing the ballast inside the light fixture is required. Need ballast removal. 4p conductive, e-simpo's new generation. Short version 4pins, GX24q-2, G24Q-2. G24q-3, gx24q-1, suitable for g24q-1, GX24q-3 socket;. There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast. With base depth is 15. 5mm/0
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight66 Grams

9. PHITUODA

#ad

4 Pin Bulb Base Converter LED Accessories, Gx24q to E27 Lamp Base Holder, NOT PLUG AND PLAY, PHITUODA 4pcs Gx24q to E26/E27 Socket Adapter, Rewire/Remove/Bypass the Ballast is Required

#ad
PHITUODA #ad - If you are not sure, please consult an electrician. They are practical and convenient for your life that is an ideal household tool. Widely application: our socket converter is suitable for home lighting, photography lighting, office lighting, restaurant lighting, and other suitable places.

Warmly notes: in order for these adapters to work properly, the ballast in the luminaire must be removed or bypassed. Do not use ballasts to operate LED bulbs in lamps. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale! Works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube; g24q-2 base:18w quad Tube; GX24q-2 Base:18w Triple Tube; G24q-3 Base:26w 32w Quad Tube; GX24q-3 Base:26w 32w Triple Tube.

If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. Hassle-free guarantee: phituoda's products can only be packed and shipped after strict quality inspection. Doing so may cause the bulb to flicker or even smoke! Check the size first: 4 x led light socket adapter. Premium material: lamp base converter made of flame retardant PBT material and copper nickel-plated pins, more durable and practical, Small size and lightweight.
BrandPHITUODA #ad
ManufacturerPHITUODA #ad
Part NumberTR20210515 - 003

10. E-Simpo

#ad

60-Pack GX24q to E26 Lamp Base Converter,GX24q-3 Adapter,G24 to E26 Adapter, 15.5mm 4pin,Need Bypass The Inside Ballast!

#ad
E-Simpo #ad - When we remove pin-based CFL, there will be 2 ballasts, the light will not work. So the led driver input should be 100v-240v or 85-265v, like gx24q g24 gx23 g23 are lamp-ballast separated, so 600-1500V will be too high, but all screw-in E26 E27 are lamp-ballast integrated.

The ballast in your fixture must be removed or bypassed for these adapters to function properly. Consult an electrician if you are unsure. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. So the best thing is bypass or remove once we want to change CFL to LED Lamp. Because led lamp are built with leds and driver which is transforming the 100-240v ac to dc for leds. Ballast is a must to start a high voltage600V-1500V 1ms to light up the CFL, and easily destroy the led lamp.

Suit for g24q-1, gx24q-2, works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w quad tube;gx24q-2 base:18w triple tube;g24q-3 base:26w 32w quad tube;gx24q-3 Base:26w 32w Triple Tube; If your socket is 2P, gx24q-1, G24Q-2. G24q-3, gx24q-3 socket, buy: https://www. Amazon. Com/dp/b017t1ujee Physically change the contact. This is 4p, otherwise, not for 2p;need bypass or remove the ballast, it doesn't light on.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height2.3 Inches
Length1.5 Inches
Weight0.05 Pounds
Width1.5 Inches
Part NumberGX24Q-E26