As an Amazon Associate I earn from qualifying purchases.

1. GearWrench


GEARWRENCH 6 Pc. Spindle Nut Set, 41660D

GearWrench #ad - 2467 - 4-lug socket for removing and installing 4-slot front axle locknuts on 1986-newer F-series 1/2-ton trucks, full-size Bronco with Dana 44 axle, 1984-92 Ford Ranger, and Bronco II with manual hubs and Dodge trucks.3937 - 4-lug socket for removing and installing 4-slot front axle locknuts on 1993-newer ford ranger, 3/4-, and explorer with manual hubs; 1995-newer f-series 1/2-, bronco ii, and 1-ton trucks and full-size Bronco with manual hubs; 1959-85 F-series 1/2- and 3/4-ton trucks and full-size Bronco; 1960-90 GM 1/2-ton trucks and full-size Blazer/Jimmy; 1969-72 International 1/2-Ton trucks; 1969-89 Dodge 1/2-ton trucks with manual hubs.

Use with a torque wrench, ratchet, or breaker bar. Large 4wd spindle puller 3910D shown third from left is included in the set but is no longer available individually. Includes blow mold case for storage and organization. 3195 - ford 4-lug locknut socket for high-shear rotating nuts on 1985-newer F-250 and F-350 truck rear axles, and Dana 80 rear axles of Ford Super Duty trucks. 6 chrome vanadium steel 1/2" drive sockets are for most 4WD SUV's and light truck axle locknut applications".

2770d - 6-lug socket for removing and installing 4-slot front axle locknuts on 1978-84 Ford F-series 4WD heavy-duty 3/4- and 1-ton trucks; 1973-81 GM 4WD 3/4- and 1-ton trucks. 3911d - toyota 4-lug locknut socket; services high-torque locknuts on Toyota 4WD vehicles having free-wheel lock out hubs: 1995-newer Tacoma; 1996-newer T100 and 4Runner; not for 2-wheel drive vehicles. 3910d - removes front spindle to access needle bearing when lubricating and aligning front wheels; 5/8"-18 fine thread permits use with slide hammer; fits spindle thread sizes 2"-16, 1”-5/8"-16, and 38mm-15; full-size GM, Ford, and Jeep with Dana front axles".
BrandGearWrench #ad
ManufacturerKD Tools #ad
Height2.9 Inches
Length13.4 Inches
Weight2.68 Pounds
Width10 Inches
Part Number41660D
WarrantyStandard Limited Lifetime

2. Performance Tool


Performance Tool W1273 2-1/2-Inch 4 Wheel Drive Lock Nut Socket

Performance Tool #ad - Model number: W1273. Item package dimension: 9. 0" l x 6. 0" w x 0375" h. Country of Origin: China. Item package Weight: 1. 0 lb.
BrandPerformance Tool #ad
ManufacturerWilmar Corporation #ad
Height2.8 Inches
Length5.5 Inches
Weight0.35 Pounds
Width2.8 Inches
Part NumberW1273

3. Powerbuilt


Powerbuilt 648636 5 pc Spindle Nut Socket Kit

Powerbuilt #ad - Impact rate 6-Point chrome vanadium sockets. Tool set for removing spindle nuts. Made to be the most reliable tools in the market today. The right tool for the job. Kit 11 includes 5-Piece for removing spindle nuts. Tool solutions for most all situations. Built to exceed tool standards. Storage case includes usage photos.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height13 Inches
Length4.75 Inches
Weight10.91 Pounds
Width14.5 Inches
Part Number648636

4. Alltrade


Alltrade 647067 2-9/16" 6 Pt. Rounded Wheel Bearing Lock Nut Socket

Alltrade #ad - 1993 dodge trucks with Dana 60 Manual hubs. 2-9/16-inch 6 pt. Durable and long lasting. Round hex socket for use on 1990-1993 Dodge trucks with Dana 60 manual hubs. Heat-treated carbon steel. Lifetime Warranty. Rounded socket for use on 1990-. Made from quality materials. 2-9/16" 6 point rounded wheel bearing lock nut SKT. 2-9/16" 6 pt.
BrandAlltrade #ad
ManufacturerPowerbuilt #ad
Height6.13 Inches
Length3.13 Inches
Weight1.47 Pounds
Width3.13 Inches
Part Number647067



OEMTOOLS 25243 Axle Spindle Locknut Socket

OEM TOOLS #ad - Sockets. Drive tools With 3/8 In. Square Drive. Fits adjusting nuts found on 1995-96 ford F-150 Trucks and Full-Sized Broncos with Automatic Locking Hubs. 1/2 in. Get into tight spots Like Those Around a Transmission Bell Housing. Ability to use 1/2 in.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height6.2 Inches
Length6.2 Inches
Weight0.65 Pounds
Width2.8 Inches
Part Number25243
WarrantyOEMTOOLS Limited Lifetime



GEARWRENCH 1/2" Drive 4-Lug 4WD Spindle Nut Socket 1/2 to 3/4 Ton Dana 44, 2467

GEARWRENCH #ad - 4 wheel drive spindle nut wrench. Works on ford vehicles with ratcheting type lock nuts on front axle. Features uniquely designed lugs for maximum strength. Four-lug wrench removes spindle nuts on 1/2-ton 4 wheel drive vehicles. Do not use with power tools.
ManufacturerK-D Tools #ad
Height2.2 Inches
Length6.9 Inches
Weight1.35 Pounds
Width4.7 Inches
Part Number2467

7. Powerbuilt


Powerbuilt 647093 1/2-Inch Drive, 1-11/16-inch Dodge Spindle Nut Socket

Powerbuilt #ad - Tool solutions for most all situations. Fits 1994-newer dodge 1/2-ton 4x4 pickup trucks equipped with Dana 44 front axle as well as Dana 60 axles with vacuum disconnect. Chrome vanadium construction. The right tool makes the job easier. Impact rated. Quality product by Powerbuilt. Made to be the most reliable tools in the market today. Built to exceed tool standards.
BrandPowerbuilt #ad
ManufacturerPowerbuilt #ad
Height2.2 Inches
Length7.7 Inches
Weight1.7 Pounds
Width2.9 Inches
Part Number647093
WarrantyLifetime warranty



CASOMAN 1/2- Inch Drive Deep Spindle Axle Nut Impact Socket Set, 9-Piece 1/2" Dr. Deep Impact Socket Set, Metric, CR-MO, 6 Point, 29mm-38mm

CASOMAN #ad - This set contains 9 pcs 1/2-inch deep impact socket, 31mm, 36mm, 35mm, 34mm, 33mm, 29mm, 32mm, 30mm, 38mm. Come with a heavy duty blow molded storage case, easy to carry.

It comes with 1 year quality warranty. High-contrast size marking is permanently laser and easy to read, even in low light. Axle nut socket 9-piece metric set – 6 point install, install, Repair to remove, Removal, and repair hub or axle nuts on your vehicle; Fits axle nuts on most American domestic and import vehicles. Meets or exceeds ANSI performance standards. Made of drop forged, heat treated chrome molybdenum steel with a corrosion-resistant black phosphate finish.
BrandCASOMAN #ad
ManufacturerCASOMAN #ad
Height3.03 Inches
Length10.75 Inches
Weight4.66 Kilograms
Width10.24 Inches
Part NumberCS038

9. Performance Tool


1/2 Drive, Lock Nut Socket 2-9/16" W83245 Drivetrain & Suspension, Performance Tool

Performance Tool #ad - All our products have been designed with the user in mind. Wilmar corporation was founded in 1971. By providing quality tools, performance techtm, project proTM and Northwest TrailTM, great service, MechanicsTM, and innovative packaging and product support, Wilmar has become one of the leading distributors of professional tools in North America.

Based in renton washington, performance tooltm, wilmar supplies major retailers as well as distributors throughout North America. Trading under the brand names of airtighttm, Wilmar focuses on providing a superior level of service and quality products that meet our customers expectations of product that carries our - of Satisfaction. Made to withstand the most challenging jobs. Proven and tested for durabilty and function in real world conditions. Leading manufacturer of high-quality products.
BrandPerformance Tool #ad
ManufacturerWilmar Performance Tool #ad
Height0 Inches
Length0 Inches
Weight1.45 Pounds
Width0 Inches
Part NumberW83245

10. OTC


6 Piece, OTC 4543A 4WD Spindle Nut Socket Set

OTC #ad - Chrome vanadium steel sockets cover most of the SUV and light truck applications. A blow-molded plastic storage case keeps set contents organized and protected from loss. Sockets have 1/2 inch square drive allowing use of a torque wrench ratchet or breaker bar.
BrandOTC #ad
ManufacturerOTC #ad
Height3 Inches
Length14 Inches
Weight13.1 Pounds
Width9 Inches
Part Number4543A
Warranty1 year limited warranty