Top 10 Countersink Bit Metal – Countersink Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. Irwin Tools

#ad

5-Piece 1877793, IRWIN Countersink Drill Bit Set for Metal

#ad
Irwin Tools #ad - Made from industrial Grade High Speed Steel For Increased Durability. Precision ground 82° tip for Countersinking Most Machinable Metals, Wood, And Plastic. Includes a black oxide Finish For Added Corrosion Resistance. Five-flute design reduces Vibration For Smoother Drilling And Extended Life.
BrandIrwin Tools #ad
ManufacturerIrwin Tools #ad
Height7 Inches
Length1.63 Inches
Weight0.46 Pounds
Width4.38 Inches
Part Number1877793
Model1877793

2. Neiko

#ad

1/4” Tri-Flat Shank | 1/4”-3/4”, Neiko 10218A Countersink Drill Bit Set, 5 Piece Set with Carrying Case, M2 High Speed Steel

#ad
Neiko #ad - Five-flute design reduces vibration for smoother drilling and tri-flat shank allows easy gripping. Set of five 1/4" countersink drill bits with precision-ground 82-degree tips for drilling into wood, plastic, rubber, soft metals, and more. Made of high quality m2 material construction for extended bit life and 1/4" shank fits common handheld power drill. Set contains 1/4", 5/8", 3/8", 1/2", and 3/4" countersink drill bits that are very commonly used. Sturdy aluminum case with handle included for carrying and storage.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height1.42 Inches
Length4.8 Inches
Width3.62 Inches
Part Number10218A
Model10218A

3. OCGIG

#ad

OCGIG 4pcs Countersink Chamfer Tool HSS4241 Deburring Tool Set Metal Wood Drill Bits

#ad
OCGIG #ad - This bits should use the bench drill, it is easy to shake and it will affect the chamfering effect if you use the hand drill. 90° angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole. Material: high speed Steel HSS 4241. Shank type: round, 10-15 mm, 5-10mm, Sizes: 2-5mm, 15-20mm. Ideal for cutting through metal, wood and plastic hardness
BrandOCGIG #ad
ManufacturerOCGIG #ad
Part NumberOCG-TL219

4. SLIIMU

#ad

Mill Drill Bit Set Size is 1/4” 3/8” 1/2” 5/8” 3/4”with High Speed Steel, Steel, 5 Flute, 82 Degree, 6mm Round Shank, 5pcs Metal Countersink Drill Bit Set for Wood, Carrying Case, Metal

#ad
SLIIMU #ad - Type: 5 blades and 82 degree angle. High-quality material: the drill bit is made of M2 high-speed steel HSS, with a golden oxide coating on the surface, which is very strong, which can resist corrosion and have a long service life.

Please rest assured to buy. Size: a total of five drill bits, 5/8", 3/4", 1/2", the sizes are 1/4", 1/4", 3/8", the 1/4" round shank of the drill is suitable for all hand-held or fixed electric drill. What will you get? countersink drill bit x 5, aluminum protective box x 1, aluminum protective box filled with bubble wrap to ensure that the product will not be damaged during transportation.

The five-blade design reduces vibration, make the drill smoother, can better remove chips, and extend the life of the drill. Tips: if you have any questions, just feel free to contact us for help. Suitable for many materials: the countersink drill bit can be used for most machinable metals, softwood, fiberglass plastic, mild steel, hardwood, plywood, don‘t use on stainless steel.
BrandSLIIMU #ad
ManufacturerSLIIMU Co., Ltd. #ad
Part Numberxxy-025

5. DKIBBITH

#ad

Countersink Drill Bit Set, 5 Pieces High Speed Steel 82 Degree 5 Flute 6mm Round Shank Mill Cutter Bit Countersink in Sizes 1/4” 3/8” 1/2” 5/8” 3/4” Set with Carrying Case.

#ad
DKIBBITH #ad - Versatility – comes in 5 most popular sizes bits 1/4, 5/8, 1/2, 3/8, 3/4 inch counter sink drill bits. Durability - made from High-Speed Steel with golden oxide finish for corrosion resistance. Precision - 82-degree tip drills countersink holes into most machinable metals, fiberglass plastic, mild steel, hardwood, plywood, softwood, don't work on stainless. Efficient- five-flute design reduces vibration and removes chip better, provides smoother drilling experience and extended bit life. Compatibility – 1/4” round shank fits all handheld and stationary drills.
BrandDKIBBITH #ad
ManufacturerDKIBBITH #ad
Part NumberDKVIP-004

6. BOSCH

#ad

BOSCH CST1 1/2 In. Titanium-Coated Countersink

#ad
BOSCH #ad - Trailing flute automatically deburrs holes. Eliminates chatter and vibration. Balanced double flute. Resharpenable cutting edge enables longer tool life. Self-starting point starts on contact.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight0.03 Pounds
Width0 Inches
Part NumberCST1
ModelCST1
WarrantyNo

7. DKIBBITH

#ad

M2 High Speed Steel 60-Degree Angle Center Drill Bits Kit Countersink Tools for Lathe Metalworking Size 1.0 1.5 2.0 2.5 3.0 4.0 5.0, 7 Pieces Center Drill Bits Set

#ad
DKIBBITH #ad - Accurate: a 60-degree angle center drill is very useful in drilling accurate center holes, 60-degree countersink holes or starter holes for bigger drill bits in metal-working.

If you encounter any problems with the products, please feel free to contact us. Widely applicable: work with lathe machines and most electronic drills to drill holes in Steel, Alum, Iron, Carbon Steel, Brass and other tough material ranging from 170HB up to 200HB. Wide range of sizes: including 7 pieces of plain center drill Bits Set range in size 1. 0 1. 5 2. 0 2. 5 3. 0 4. 0 5. 0 to meet different needs. High quality: our center drill bits made of high quality M2 High speed steel, solid and high temperature wear resistant. Worry free: this center drill bits set comes with a portable storage case for convenient use and store.
BrandDKIBBITH #ad
ManufacturerDKIBBITH #ad
Weight80 Grams
Part NumberDKVVT-002
ModelDKVVT-002

8. amoolo

#ad

Amoolo Countersink Drill Bits Set 7Pcs, Counter Sink Drill Bit for Wood, 1 Free Hex Key Wrench Attached, Woodworking High Carbon Steel Carpentry Bit with Chamfering Combination Pedestal

#ad
amoolo #ad - Not for hard metals or steel board. Efficient design3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling; 2-spiral flute makes chip removing easy and efficient; 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth.

Ideal combo set a set of 7 countersink drill bits with 7 drill size, 1/4”6mm, 5/16”8mm combine with 19/32”15mm countersink pedestal, φ7/64”3mm, 13/32"10mm combine with φ45/64"18mm countersink pedestal. Come with a portable plastic case for easy select, 5/32”4mm, 13/64”5mm, 9/32”7mm, storage and organization. The drilling depth of countersink drill bits are adjustable by screws with various lengths; Meanwhile, their bits are removable for easy cleaning, Plywood, Fiberboard, PVC and soft metals. A 1/10"2. 5mm free hex key wrench. All cutting edge are well hardened and honed for sharpness.

Sophisticated designextra straightening drill bit with exquisite countersink pedestal provide user a method of drilling a countersink hole with 1 time drill process. Extra straightening drill bit makes the drill hole accurate and smooth, exquisite countersink pedestal creates proper countersink structure with efficient experience. Premium qualitymade with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Suitable for hand drill, and replacement.
Brandamoolo #ad
Manufactureramoolo #ad
Part NumberACSD190607PCS

9. JNB Pro

#ad

3/8", 1/2", SIZES 1/4", JNBPRO COUNTERSINK DRILL BIT SET FOR METAL, METAL COUNTERSINK BIT SET, 5 FLUTES w/ 82 DEGREE, 5 PC HIGH SPEED STEEL WITH 5% COBALT HSS-Co M35 GRADE, 5/8" & 3/4", 1/4" ROUND SHANK

#ad
JNB Pro #ad - Metal bit composition - esclusively designed to work with industrial grade metals they are manufactured with High Speed Steel with 5% Cobalt known as HSS-Co M35 grade. Importante tips for use - the metal countersink bits are just a chamfer tool to countersink the holes, it is not self drill tool, the pre drill with a metal drill bit with desired size for the screws has to be done before using it for countersink.

Design - designed with 82 degree 5 flutes to reduce vibration and smoother drillling, the 1/4" round shank fits all stationary and hand drills. Durability - this metal counter sink bit set for steel is made for last longer than any other regular High Speed Steel bits, they are extremely sharp and finished with black & Gold corrosion proof.

Efficiency - working with stationary drill ensures better finish on chamfers but they can be used with hand drills as well for countersinking in any hard or soft metal and any type of wood.
BrandJNB Pro #ad
ManufacturerJNBPro #ad
Part NumberJP14T75M

10. ORX PLUS TOOLS

#ad

90 Degree Quick Release Shank Fits for 1/8"-3/4"3mm-19mm, ORXPLUS Tools 5 Flute Metal Countersink Drill Bit

#ad
ORX PLUS TOOLS #ad - Features a 1/4" quick change Hex shank fits all handheld and stationary drills. Designed to clean internal pipe ends quickly and safely. Multiple application - suitable for use including stainless steel, brass, hardened steel, mild steel, copper, plastic and many more. Made of alloy steel, cutter to remove damaged metal and burrs. Applicable for use on hole from 3mm to 19mm in diameter.
BrandORX PLUS TOOLS #ad
ManufacturerORX PLUS TOOLS #ad
Height1.77 Inches
Length1.14 Inches
Width1.14 Inches
Part NumberPO-045-4