As an Amazon Associate I earn from qualifying purchases.
1. Bora #ad
Includes 50-inch Clamp Edge, BORA 5-Piece NGX Clamp Edge System Set For Making Precision Cuts, Track Clamps, 50-inch Extension, Pro Saw Plate, Non-Chip Strip, 544500 #adBora #ad
- A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts. Stop the guesswork: effortlessly attach the ngx saw plate to your right- or left-handed saw with the adjustable quick-release clamps.
Track saw precision: making straight cuts with a circular saw, or jigsaw is a challenging task, router, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
Attach it to the bottom of the NGX Clamp Edge for a smooth finish. 100” of cutting capacity: the ngx 50” clamp edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber.
And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension. Reduce tear out: prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Cut any angle: attach the additional two Track Clamps to the Clamp Edge for pro level angle cutting capability.
|Manufacturer||Affinity Tool Works #ad|
2. Bora #ad
Bora 100-Inch NGX Clamp Edge, 544100, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length #adBora #ad
- Locking handle grabs work surfaces for a secure grip that won’t budge. Use with circular saws, routers, Jig saws, and other portable power tools. Includes bora ngx 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors.
Made of heavy-gauge, rigid aluminum for extreme durability. Clamping end moves with handle for easy adjustability from one side.
3. Bora #ad
Bora NGX T-square Clamp Edge Accessory 544002 #adBora #ad
- Squares your clamp edge to the material you are cutting. Trapezoidal wedge system makes it easy to connect components. Precision aluminum extrusion profile perfectly matches clamp edge fixed head.
Fits all sizes of NGX Clamp Edge. Part of the ngx clamp Edge System to cut and rip sheets and boards.
4. Bora #ad
Straight Cutting Saw Guide Accessories for Circular Saw, 544600K, Bora NGX 6-Piece Premier Set #adBora #ad
- Includes 50” clamp edge and 50” extension for 100” cutting capacity. Made of heavy-gauge, rigid aluminum for extreme durability. Clamping end on straight edge moves with handle for easy adjustability from one side.
Includes: 50-inch ngx clamp edge, 2 rolls of non-chip strip, 2 Track Clamps, 50-inch NGX Extension with connectors, saw plate, T-Square Accessory. Locking handle grabs work surfaces for secure grip that won’t budge.
|Manufacturer||Affinity Tool Works #ad|
5. Bora #ad
Bora 36" NGX Clamp Edge 544036 #adBora #ad
- Easily increase length with 50 inch extension; Made of heavy-gauge, rigid aluminum for extreme durability. Use with circular saws, routers, jig saws, and other portable power tools.
Clamping end moves with handle for easy adjustability from one side. Part of entire ngx clamp Edge System to cut and rip sheets and boards. 30 inch cutting capacity. Locking handle grabs work surfaces for secure grip that won’t budge.
6. Bora #ad
Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, Straight Cut Guide for Circular Saws, BORA 50” NGX Clamp Edge, 544050 #adBora #ad
- Use with any circular saw: this guide is compatible with any brand of circular saw, and jigsaws. Premium quality: the bora clamp edge straight cut guide is designed for heavy-duty use in the toughest conditions.
Use it with circular saws, easily increase the length up to 100 in. Extreme durability: made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
Circular saw guide for large sheets: the BORA clamp edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
For big projects, routers, not just BORA tools. By adding the bora NGX 50-inch aluminum extension. Its durable construction and precision engineering ensure an accurate cut every time. Clamps firmly: this straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
7. Bora #ad
Two-Pack, Securely Cut Any Angle w WTX and NGX Clamp Edge Systems, BORA Track Clamps, DIY, Saw Guide Accessory for Woodworking, 542011, Carpentry #adBora #ad
- Easy set up: attach the track clamp to the top or bottom of the rail for maximum grip. Easily tighten or adjust the clamp with the speed nut and lock it in place.
Cut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate. Versatile: sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power.
Non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations. Solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose.
|Manufacturer||Bora Portamate #ad|
8. Bora #ad
Designed for Straight Cuts While Using The NGX Clamp Edge System, 544001, Bora NGX Saw Plate Includes 55" Non-Chip Strip That Elimates Tear Out #adBora #ad
- Self-adhesive non-chip strip attaches to the bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish. Aluminum guide rails Position Your Saw Accurately Every Time.
Quick-release clamps are adjustable So Your Saw Goes On And Off The Plate Effortlessly. Fixed center molded Channel Reduces Blade Offset And Guesswork.
9. Bora #ad
Bora 24" NGX Clamp Edge 544024 #adBora #ad
- Use with circular saws, jig saws, routers, and other portable power tools. Part of entire ngx clamp Edge System to cut and rip sheets and boards. Easily increase length with 50 inch extension; Made of heavy-gauge, rigid aluminum for extreme durability.
Clamping end moves with handle for easy adjustability from one side. Locking handle grabs work surfaces for secure grip that won’t budge. 24 inch cutting capacity.
10. Bora #ad
Bora 50" NGX Clamp Edge Extension, 544060, Straight Cut Guide For Circular Saws | Add 50-Inches To Your NGX Clamp Edge #adBora #ad
- Includes connectors. Fits into ngx clamp edge saw guide to increase length by 50 inches. Adds 50-inches to your existing NGX clamp edge guide. Made of heavy-gauge, rigid aluminum for extreme durability. Quick set up.