As an Amazon Associate I earn from qualifying purchases.
POWERTEC #ad - Premium build: the bench dogs were constructed out of high quality nylon, delivering strength and uniformity, and come with non-slip ethylene vinyl acetate EVA rubber bench brake inserts. Features: a practical, low-profile design that not only increases the precision of your woodworking projects, but improves the safety of your employees and workpieces as well – including removable padded bench brakes for an anti-slip work surface and a squared clamping pad that delivers a secure fit.
Specs: total length of each bench dog is 2 inches with a slightly less than 3/4 inch diameter and 1-7/8 inches without the bench brake bump - Installs easily by drilling a 3/4” 19mm diameter bench dog hole and simply press into place.
POWERTEC #ad - Premium build: constructed from high quality aluminum, these bench dog hold downs possess a premium finish with exceptional toughness and flaunt corrosion resistant properties for long-term durability.
Includes: 2 workbench dogs. Function: these round workbench stops provide a secure and reliable hold on your wood Item – securing them along the edge or on top of your workbench while giving you optimal control, leverage and stock access.
Features: a practical design that not only increases the precision of your woodworking projects, but your employees safety as well – including a side spring for smooth dog sliding and a combination cross hatching face paired with a two Degree inward slope for proper work piece placement and stabilization.
DDWT #ad - A perfect holding solution when hand planing thin or wide stock, allows planing of boards as thin as 7mm, Prevents the workpiece from skewing under your plane. Made of aluminum alloy, not damage to the surface of the workpiece, durable to use, not ruin plane in accidentally.
POWERTEC #ad - Function: these workbench stops provide a safe, non-marring, routing, and secure hold on your wood stock – anchoring them along the edge or on top of your workbench while giving you optimal control, leverage and accessibility for cutting, Painting, and sanding applications.
Specs: total length of each bench dog is 2 inches with a slightly less than 3/4 inch diameter and 1-7/8 inches without the bench brake bump - installs easily by drilling a 3/4” 19mm diameter bench dog hole and simply press into place.
Features: a practical, low-profile design that not only increases the precision of your woodworking projects, but improves the safety of your employees and work pieces as well – including removable padded bench brakes for an anti-slip work surface and a squared clamping pad that delivers a secure fit. Also included two 3/16” holes where dowels can be inserted for perfect painter's points.
Kreg Tool Company #ad - Bench brakes: press in place for a solid non-slip work surface. Painter's point: provides minimal surface contact for painting/finishing applications.
Fits standard 3/4" 19mm diameter Bench Dog hole. Great for routing, cutting, and sanding. Place in bench Dog or directly in bench. Place in bench Dog or directly in bench.
Taytools #ad - They allow securing work to the edge or top of your bench by using 3/4 inch holes. These dogs are just under 3/4 inch by 0015 inches so they won’t bind in the hole, yet the side spring holds them in place at any desired height.
Bench dogs will greatly improve the function of any bench. Overall length is 2-1/4 inches. Come in packs of 2 each. Bench dogs are an essential hold down device that should be a part of any workbench.
Deadwood Crafted Tools #ad - Various applications: 1-7/16-inch 3. 7cm low profile for 3/4-inch 1. 9cm round hole in a 1/2-inch 1. 3cm or thicker material; for use in light-duty and medium-duty applications such as routing, planing, cutting, and sanding. Stabilize your woodworking project: use the dct woodworking plastic bench dogs 4-pack – workbench peg brake Stops for 3/4" Holes in 1/2" Inch or Thicker Material to turn your workbench into a nonslip work platform to provide a flat surface that securely holds your woodworking stock in place for maximize leverage; Ensures stationary workpiece immobility preventing your workpiece from slipping or moving on your workbench so you can safely focus on your project.
Built to last: constructed from black plastic for longevity and rust-resistance; Unlike metal bench dogs, these plastic ones will not mar your woodworking stock; If you accidentally hit these with your prized chisel or plane, you will be glad that they are plastic. Contents: package includes 4 bench dogs for your convenience.
POWERTEC #ad - Premium build: made with high grade hardened plastic that’s durable enough to work with your heavy duty applications, cutting, yet gentle enough to work with an assortment of lite to medium applications, including routing, sanding, planning and more.
Low profile: design provides exceptional wood and stock clearance, while delivering non-marring functionality that conveniently prevents bench dog Router table pressure marks. 7mm or more thick – Plus they can rotate for installation versatility.
Sjobergs #ad - Made in Sweden. Set of 4x 3/4-inch bench dogs. Steel core with plastic coasting to protect edge tools and reversible thin work. Fits 3/4-inch 19mm standard bench dog holes.
1. POWERTEC
#adPOWERTEC 71500 Deluxe Bench Dog | 8 Pack | Non Marring Durable Nylon| With Grommet Bench Brake Inserts Made of Premium Nonslip EVA| For 3/4" Dog Holes | A Woodworking Shop Essential Color May Vary
#adMore information #ad
Also included two 3/16” holes where dowels can be inserted for perfect painter's points. Includes: 8 Workbench Dogs. Function: these workbench stops provide a safe, and secure hold on your wood stock – anchoring them along the edge or on top of your workbench while giving you optimal control, non-marring, routing, leverage and accessibility for cutting, painting, and sanding applications. Specs: total length of each bench dog is 2 inches with a slightly less than 3/4 inch diameter and 1-7/8 inches without the bench brake bump - Installs easily by drilling a 3/4” 19mm diameter bench dog hole and simply press into place.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1.5 Inches |
| Length | 8 Inches |
| Width | 6 Inches |
| Part Number | 71500 |
| Model | 71500 |
More information #ad
2. Taytools
#ad4-3/8 Inch, Taytools Solid Brass Round Workbench Dogs for 3/4 Inch Holes 4
#adTaytools #ad - The strong springs in the side provide just enough friction to keep the dogs in place and allow easy adjustment and removal. The top cutout is machined with a 2-degree negative slope and has crosshatching on the face to provide a better grip on workpieces.More information #ad
The brass will not corrode and will not destroy your tools if struck. Taytools bench dogs are precision machined from solid brass and designed to fit any standard 3/4-inch diameter workbench dog hole. The outside diameter is. 730 inch and come in 2 lengths: 2-3/8 and 4-3/8 inches long.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Height | 1 Inches |
| Length | 5 Inches |
| Weight | 2.13 Pounds |
| Width | 2 Inches |
| Part Number | 776100_x2 |
| Model | 776100_x2 |
More information #ad
3. POWERTEC
#adPOWERTEC 71159 Aluminum Bench Dogs ¾ Inch x 2-3/8 Inches | Spring Loaded Hold Down for Workbenches – 2 Pack
#adIncludes: 2 workbench dogs. Function: these round workbench stops provide a secure and reliable hold on your wood Item – securing them along the edge or on top of your workbench while giving you optimal control, leverage and stock access.
More information #ad
Specs: total length of each bench dog is 2-3/8 inches with a slightly less than 3/4 inch diameter and a 5/8 inch flat bit Section - installs easily by drilling a 3/4” 19mm diameter bench dog hole. Features: a practical design that not only increases the precision of your woodworking projects, but your employees safety as well – including a side spring for smooth dog sliding and a combination cross hatching face paired with a two Degree inward slope for proper work piece placement and stabilization.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1 Inches |
| Length | 4.5 Inches |
| Width | 5.2 Inches |
| Part Number | 71159 |
| Model | 71159 |
More information #ad
4. DDWT
#adWoodworking Planing Stop Bench Dogs Clamp Workbench Table Accessories 3/4 inch 19mm Dog Hole
#adMore information #ad
Fits standard 3/4 inch 19mm diameter Bench Dog hole. Use two bench dogs for wide boards or cross-grain work. The stop can slide on the board, fits all kinds table surface.| Brand | DDWT #ad |
| Manufacturer | DDWT #ad |
| Height | 1.46 Inches |
| Length | 10.24 Inches |
| Weight | 0.33 Pounds |
| Width | 1.18 Inches |
| Part Number | DT1109 |
More information #ad
5. POWERTEC
#adPOWERTEC 71188 Deluxe Bench Dog | 4 Pack | Non Marring Durable Nylon| with Grommet Bench Brake Inserts Made of Premium Nonslip EVA| For 3/4" Dog Holes | A Woodworking Shop Essential Color May Vary
#adSpecs: total length of each bench dog is 2 inches with a slightly less than 3/4 inch diameter and 1-7/8 inches without the bench brake bump - installs easily by drilling a 3/4” 19mm diameter bench dog hole and simply press into place.
More information #ad
Includes: 4 workbench dogs. Premium build: the bench dogs were constructed out of high quality nylon, delivering strength and uniformity, and come with non-slip ethylene vinyl acetate EVA rubber bench brake inserts. Features: a practical, low-profile design that not only increases the precision of your woodworking projects, but improves the safety of your employees and work pieces as well – including removable padded bench brakes for an anti-slip work surface and a squared clamping pad that delivers a secure fit. Also included two 3/16” holes where dowels can be inserted for perfect painter's points.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1.5 Inches |
| Length | 6 Inches |
| Width | 4 Inches |
| Part Number | 71188 |
| Model | 71188 |
More information #ad
6. Kreg Tool Company
#adKreg Tool Company KKS1070 Kreg Bench Dogs
#adFits standard 3/4" 19mm diameter Bench Dog hole. Great for routing, cutting, and sanding. Place in bench Dog or directly in bench. Place in bench Dog or directly in bench.
More information #ad
Great for routing, cutting, sanding. Painter's point: Provides minimal surface contact for painting/finishing applications. 4 bench dogs, 4 Bench Brakes. Squared clamping Pad for solid/secure hold. Squared clamping pad for secure hold. Bench brakes press in place for solid, non-slip work surface.| Brand | Kreg Tool Company #ad |
| Manufacturer | Kreg #ad |
| Height | 6.75 Inches |
| Length | 2.25 Inches |
| Weight | 0.26 Pounds |
| Width | 5 Inches |
| Part Number | KKS1070 |
| Model | KKS1070 |
More information #ad
7. Taytools
#adAnodized Aluminum, Taytools 468648 Pair 2 Each 3/4 x 2-1/4 Inches Bench Dogs Hold Downs for Workbenches, Side Springs
#adBench dogs will greatly improve the function of any bench. Overall length is 2-1/4 inches. Come in packs of 2 each. Bench dogs are an essential hold down device that should be a part of any workbench.
More information #ad
The dog faces have cross hatching and a 2 degree inward slop to better grab and hold your wood tight to the bench. Made from anodized aluminum that will not corrode or ruin a cutting iron or plane is accidently struck. Install wherever you want simply by drilling a ¾” diameter hole.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Height | 1 Inches |
| Length | 5 Inches |
| Weight | 0.13 Pounds |
| Width | 4 Inches |
| Part Number | 468648 |
| Model | 468648 |
More information #ad
8. Deadwood Crafted Tools
#adDCT Woodworking Plastic Bench Dogs 4-Pack – Workbench Peg Brake Stops for 3/4in Holes in 1/2in or Thicker Material
#adMore information #ad
Easy to use: simply insert into your workbench and place material flush against the dogs for a secure hold on your project; Used on tables as a stop for pieces of wood so you can plop the wood onto your workbench with a plane or other tool without the wood dangerously sliding or moving. Built to last: constructed from black plastic for longevity and rust-resistance; Unlike metal bench dogs, these plastic ones will not mar your woodworking stock; If you accidentally hit these with your prized chisel or plane, you will be glad that they are plastic. Contents: package includes 4 bench dogs for your convenience.
| Brand | Deadwood Crafted Tools #ad |
| Manufacturer | Deadwood Crafted Tools #ad |
| Height | 4.15 Inches |
| Length | 2 Inches |
| Width | 6.5 Inches |
| Part Number | 8865 |
| Warranty | This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details. |
More information #ad
9. POWERTEC
#adPOWERTEC 71037 Low Profile Bench Dogs | Woodworking Workbench Peg Stoppers for 3/4" Holes | Black – 4 Pack
#adLow profile: design provides exceptional wood and stock clearance, while delivering non-marring functionality that conveniently prevents bench dog Router table pressure marks. 7mm or more thick – Plus they can rotate for installation versatility.
More information #ad
Easy-to-use: these handy peg stop brakes insert easily and snugly into 3/4-inch dog holes, and are ideal for work piece material that is 1/2” 12. Function: allows your to transform your workbench platform to a nonslip surface that prevents slippage or shifting, while safely securing your stock in place for optimal leverage. Include: 4 woodworking bench dogs.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 2 Inches |
| Length | 7 Inches |
| Weight | 0.17 Pounds |
| Width | 4 Inches |
| Part Number | 71037 |
| Model | 71037 |
More information #ad
10. Sjobergs
#adSjobergs Bench Dogs For Sjöbergs Scandi Plus, & Hobby Plus Workbenches 3/4-inch 19mm | SJO-33290, Nordic Plus, Junior Senior
#adMore information #ad
| Brand | Sjobergs #ad |
| Manufacturer | Sjobergs #ad |
| Height | 4.33 Inches |
| Length | 0.75 Inches |
| Weight | 0.37 Pounds |
| Width | 0.75 Inches |
| Part Number | SJO-33290 |
| Model | SJO-33290 |
More information #ad
