As an Amazon Associate I earn from qualifying purchases.

1. ENERLITES

#ad

UL Listed, HET06A-R, Always On Blue LED, ENERLITES Countdown Timer Switch for bathroom fans and household lights, 1-5-10-15-20-30 Min Settings with Manual Override, White, Neutral Wire Required

#ad
ENERLITES #ad - Replaces standard in wall light switches, fan switches or spring loaded timers for energy saving, convenience and lighting and fan control. Blue led light stays on, closet, garage, pantry, spa; due to the bright led light, laundry room, easy to locate in darkness.

Specifications: ul listed, neutral wire required, motor: 1/4 HP, supports LED/CFL: Incandescent: 800W, fluorescent: 800va light bulbs, Single Pole Switch. Six pre-set options: 1min, 15min, 5min, 10min, 20min or 30min; Simply push the button to set countdown time preference. Automate the shut off operations of all types of lights including LEDs, CFLs, fans and heaters at the time pre-set. Ideal for bathroom, bedrooms are not recommended for this feature. Wall Plate sold separately.
BrandENERLITES #ad
ManufacturerTop Greener Inc #ad
Height2.73 Inches
Length1.71 Inches
Width1.7 Inches
Part NumberHET06A-R-W
ModelHET06A-R-W

2. Leviton

#ad

White/Ivory/Light Almond, Leviton LTB30-1LZ Decora 1800W Incandescent/20A Resistive-Inductive 1HP Preset 5-10-15-30 Minute Countdown Timer Switch

#ad
Leviton #ad - Products with suffix z are packaged 3 colors in a box: white, Ivory and light almond. Installation instructions included and 3 way only Works with Vizia + Remote VP0SR sold separately. 4 pre-sets: 5 10 15 30 minutes. Simple press and hold override timer function. 120 vac, single pole 3 way or more locations, 600 watts cfl, 1hp, 1800 watts incandescent, 5A LED, 60 Hertz, 20A resistive/inductive, neutral required.
BrandLeviton #ad
ManufacturerLeviton #ad
Height4.5 Inches
Length3 Inches
Weight0.68 Pounds
Width4.5 Inches
Part NumberZPV-4202
ModelLTB30-1LZ
Warranty2 Year Limited

3. Maxxima

#ad

Wall Plate included, 1/2 HP Perfect for Bathroom Exhaust Fans, Maxxima 1875 Watt 7 Button Countdown Timer Switch Maximum 60 Minutes Delay

#ad
Maxxima #ad - Never worry about leaving lights or bathroom fans on for long periods of time. Incandescent 1800 watt, 60hz, voltage - 120vac, flourescent 1200VA. Fan motor 1/2hp, single Pole Circuit Load. The timer indicator led will flash for the last 10 Seconds of the selected time, letting you know when its about to shut off - timer can also be set to Constant On Mode. 6 pre-set times ranging from 1-60 Minutes, to have your lights remain on, and then automatically turn off. Etl approved, indoor Use Only, wall plate, Mounting Screws included.
BrandMaxxima #ad
ManufacturerMaxxima #ad
Weight0.07 Pounds
Part NumberMEW-PT1800
ModelMEW-PT1800

4. BN-LINK

#ad

BN-LINK Heavy Duty 60-Minute In-Wall Spring Loaded Countdown Timer, 2 Free Plate White and Silver Metallic, Mechanical Switch,For bathroom Fan,lights timer

#ad
BN-LINK #ad - Easily installs in place of existing wall switch, Fits any single or multi-Gang decorator or toggle switch plate. Directly wire this timer into a standard light switch standard toggle or decorator plate. Works with lamps, 1000-watt tungsten/5-amp, fans and other appliances. Ratings: 125-volt, 60 Hz. 20-amp, 625 w ballast, 2500-watt resistive/8-Amp, 1 HP. Automatically turns off after selected time, up to 60 minutes. Wall plate Included.
BrandBN-LINK #ad
ManufacturerCentury Products #ad
Height2 Inches
Length4.1 Inches
Weight0.35 Pounds
Width2 Inches
Part NumberBND-60/U48
ModelBND-60/U48

5. GE

#ad

Heaters, Exhaust Fans, GE Push-Button Countdown Timer Switch, Wall Plate Included, 15318, No Neutral Wire Needed, Ideal for Lights, 5-15-30 Minute/1-2-4 Hour, ON/Off

#ad
GE #ad - Choose from the following preset countdowns: 5 min, 2 hour, 15 min, 1 hour, 30 min, or 4 hour. Includes a single décor wall plate and fits most single or multi-gang rocker plates.

Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Blue led indicator lights show last used preset blinks every 20 seconds. Timer is great for use with lights, and heaters. On/off push button also allows you to turn the wired device ON or OFF without an end time. Compatible with incandescent, exhaust fans, CFL and LED bulbs. Easy direct wire installation; does not require a neutral wire ground wire is required. Led lights will stay on when wired device is ON without an end time. Ratings – 125vac 60 Hz: 6. 4a resistive, 800va ballast, 800W Tungsten, 1/4 HP.
BrandGE #ad
ManufacturerJasco Products Company, LLC #ad
Height6.88 Inches
Length2.24 Inches
Weight2.3 Pounds
Width4.78 Inches
Part Number15318
Model15318

6. ENERLITES

#ad

Bathroom Timer Switch, Night Light LED Indicator, Fan Switch Timer, In Wall Timer Switch Enerlites, Countdown Timer Switch, 2-Pack, Neutral Wire Required HET06A ,White, Light Timer Switch, 1, 30 min

#ad
ENERLITES #ad - 7 button timer switch includes push button to set the countdown timer switch: 1 min, 10 min, 5 min, 15 min, 20 min or 30 min, ideal for bathroom, laundry room fan or light control.

Led night light indicator stays on, closet, garage, pantry, easy locating in darkness. Ideal for bathroom, and laundry room. In wall countdown timer automatically turns off all types of ventilation fans, ceiling fans, motors and lights including LEDs/CFLs at the time you set. Bathroom timer switch neutral wire required* incandescent: 800W; Fluorescent: 800VA light bulbs ; Motor: 1/4HP; Single pole light switch. Save energy and never leave the lights and fan on longer than needed. Countdown timer switch replaces standard in wall light switch, fan switch or spring loaded timer for energy saving, convenience and lighting control / fan control. Not suggested for bedroom due to bright LED night light.
BrandENERLITES #ad
ManufacturerENERLITES #ad
Height2.5 Inches
Length6.25 Inches
Width5.25 Inches
Part NumberHET06A-W-2PCS
ModelHET06A-W-2PCS

7. Leviton

#ad

3A, White, Leviton IPHS5-1LW Decora In-Wall Humidity Sensor & Fan Control , Single Pole

#ad
Leviton #ad - 600w incandescent, 150w led/cfl, 400va magnetic low Voltage/Flourescent, 1/6th HP 3-Amp fan. Replaces a single pole switch for control of ventilation fan or a fan/light combination, Fits in a standard wall box and requires a neutral for operation, The device’s built in humidistat control meets CALGREEN requirements for Indoor Air Quality and Exhaust, Five Year Limited warranty.

The sensor will continue to operate the fan for the minimum time set or until there is a reduction in room humidity level. 20 minutes on/40 minutes OFF each hour. Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew, Sensor uses microprocessor and digital sensing technology to continuously monitor and manage humidity levels in a room.

Built in timer sets the “minimum on time” for the ventilation fan. A sensitivity level adjustment allows users to adjust the sensor’s sensitivity to ambient air to prevent false cycling. Features an air cycle mode which automatically turns ON the ventilation fan for a set period of time and repeats the cycle hourly eg. The sensor time settings can be custom set to 10, 20, 30 or 45 minute intervals.
BrandLeviton #ad
ManufacturerLeviton #ad
Height4.13 Inches
Length1.75 Inches
Weight0.3 Pounds
Width1.22 Inches
Part NumberIPHS5-1LW
ModelIPHS5-1LW

8. ENERLITES

#ad

Fan Switch Timer, White, 5 min – 4 hrs, ENERLITES HET06-R-2PCS Countdown Timer Switch, Bathroom Timer Switch, Night Light LED Indicator, Wall Light Timer Switch, Neutral Wire Required, 2-Pack

#ad
ENERLITES #ad - Mode 1: blue led light flashes twice indicating setting success then stays off. Energy efficient: ideal energy saving solution for bedroom, sprinkle system, exhaust fans, garage and laundry room applications.

Replaces any standard wall switch, fits any standard decorator wall plate. Timer light switch: controls the ON/OFF operation of lights, fans, air conditioner and heaters according to the countdown time set. Countdown timer: six preset countdown time options: 5, 10, 30 or 60 mins, 2 or 4 hrs; Bottom button for re-set. Conserve energy and only leave the motor on as needed. Specifications: 120v, 1-year, electronic ballast/led 5a or 600w. Neutral wire required*, 15a resistive, 1/2HP Motor, 1000W Tungsten, UL Listed. Mode 2: led stays on during the selected time delay then shuts off.
BrandENERLITES #ad
ManufacturerEnerlites #ad
Height1.7 Inches
Length1.71 Inches
Width2.73 Inches
Part NumberHET06-W-2PCS
ModelHET06

9. Woods

#ad

Woods 59007WD In-Wall 30-Minute Decora Digital Countdown Timer

#ad
Woods #ad - Energy-saving wall switch timer: this wall outlet timer switch helps you save energy and money by automatically switching on/off your indoor lights, fans, heaters and other appliances according to your programmed schedule. Multi-purpose wall light switch timer: this wall light timer switch not only works with your indoor lights, chandeliers and compact fluorescent bulbs, it’s also compatible with fans, heaters and festive lights too.

Easy-to-use timer wall switch: to programme the in-wall timer switch, simply press one button to select 5, 10, 15 or 30 minutes. Easy installation: the timer switch for wall can fit into an existing switch plate and requires no construction or drywall work. Our company strives to deliver strong performance every day.

We’ve built a culture that puts customer needs first, surge protectors, garden lights, making us easy to do business with and placing us at the top of our customers’ list of suppliers. Satisfaction guaranteed: a leader in a wide variety of electrical cord products, bulk electrical and electronic wire, timer products and other accessories. Ratings for programmable wall switch timer: 120v/60 hz, 8a/1000W Tungsten; 8A/1000VA ballast, 15A/1875W Resistive, 1/4 HP.
BrandWoods #ad
ManufacturerWoods #ad
Height2.25 Inches
Length6 Inches
Weight0.03 Pounds
Width3 Inches
Part Number59007WD
Model59007

10. Intermatic

#ad

White, Intermatic FD30MWC 30-Minute Countdown Wall Timer for Fans and Lights

#ad
Intermatic #ad - Incandescent/fluorescent/CFL/LED compatible. A neutral connection is not required for installation. Automatically limits the operating time to a maximum of 30 minutes for fans, lights and more. This in-wall timer is designed to replace any standard wall switch, single or multi-gang, and is intended for use with a decorator wall plate not included. This spring-loaded mechanical countdown timer switch requires no electricity to operate.
BrandIntermatic #ad
ManufacturerIntermatic #ad
Height2.75 Inches
Length2.1 Inches
Weight0.3 Pounds
Width1.75 Inches
Part NumberFD30MWC
ModelFD30MWC
Warranty1 Year - replace whole unit