As an Amazon Associate I earn from qualifying purchases.

1. Accord Ventilation

#ad

White, Accord ABRFWH2020 Return Filter Grille with 1/2-Inch Fin Louvered, 20-Inch x 20-InchDuct Opening Measurements

#ad
Accord Ventilation #ad - For sidewall or ceiling application. Listed product sizes refer to the duct opening measurements, not the register itself. Removable hinged face accepts nominal 1-in thick filters for easy installation and cleaning. The number of louvered columns and mounting holes will vary based on the size of the grille ordered. Steel construction, 1/2-in spaced fins.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height1.6 Inches
Length22.1 Inches
Weight8.1 Pounds
Width22.1 Inches
Part NumberABRFWH2020
ModelABRFWH2020

2. Handua

#ad

20" X 20" Steel Return Air Filter Grille Removable Face Door for 1-inch Filters HVAC Duct Cover Grill, White | Outer Dimensions: 22 5/8"W X 22 5/8"H for 20x20 Duct Opening

#ad
Handua #ad - Wall opening Size = Listed Grille Size. Handua return air filter grille used for sidewall or ceiling openings. If the hole on the wall is 20"Wx20"H please order a 20"x20" grille.

The door/face is removable for easy filter change and cleaning, this Grill uses a 1" thick filter not included. The steel is stamped so there is no sharp edges. Durable white powder coated, high quality steel removable face allows easy access to replace air filter. Using our return air filter grille within your ventilation system will improve your home circulation. Always measure the wall opening to determine which size you should order. Our return air filter grilles do not require screwdriver to open, you can easily open the latch with a finger move.
BrandHandua #ad
ManufacturerHandua #ad

3. HVAC Premium

#ad

HVAC Vent Duct Cover, White Outer Dimensions: 21.75w X 21.75h, Removable Face/Door, 20" X 20" Return Air Filter Grille Filter Included

#ad
HVAC Premium #ad - Beautiful and Sturdy. Unrestricted airflow for your hvac system - noise Free Components - No Vibrating Louvers Etc. High quality solid Stamped Steel - No Sharp Edges. Quality packaging. Our filter grille latch is easy to Use On Your Fingers And Requires No Screwdriver To Open.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Height20 Inches
Length20 Inches
Width20 Inches
Part Number0
WarrantyManufacturer

4. HVAC Premium

#ad

HVAC Duct Cover, White Outer Dimensions: 22.5 X 21.75, Removable Face/Door, 20" X 20" Steel Return Air Filter Grille for 1" Filter, Flat Stamped Face

#ad
HVAC Premium #ad - High quality solid Stamped Steel - No Sharp Edges. Easy to use - our easy to use filter grille latch is powder-coated BEFORE Installation - And Requires No Screwdriver To Open After Installation, Just Open and Close Latche. 20" x 20" steel return air filter grille for 1" filter - removable face/door - hvaC DUCT COVER - Flat Stamped Face - White Outer Dimensions: 22. 5 x 21. 75.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Height20 Inches
Length1 Inches
Weight6.06 Pounds
Width20 Inches
Part NumberRFG2020 FBA
ModelCECOMINOD097434
WarrantyManufacturer

5. HVAC Premium

#ad

Removable Face/Door, HVAC Duct Cover, Flat Stamped Face -White Outer Dimensions: 17.75w X 21.75h, 16" X 20" Steel Return Air Filter Grille for 1" Filter

#ad
HVAC Premium #ad - Removable door/face for easy filter Change & Cleaning - Uses a 1" Thick Filter. High quality solid Stamped steel and No Sharp Edges. Powder-coat finish - smooth, scratch-Resistant, Shiny, Beautiful. Our filter grille latch is easy to Use On Your Fingers And Requires No Screwdriver To Open. Beautiful and Sturdy. Looks like It Was Just Waxed.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberMFRFG1620
ModelCECOMINOD096472
Warrantymanufacturer

6. HVAC Premium

#ad

HVAC Duct Cover, 14" X 20 Steel Return Air Filter Grille for 1" Filter, White Outer Dimensions: 16.5 X 21.75, Removable Face/Door, Flat Stamped Face

#ad
HVAC Premium #ad - High quality solid Stamped Steel - No Sharp Edges. Easy to use - our easy to use filter grille latch is powder-coated BEFORE Installation - And Requires No Screwdriver To Open After Installation, Just Open and Close Latche. 14" x 20 steel return air filter grille for 1" filter - removable face/door - hvaC DUCT COVER - Flat Stamped Face - White Outer Dimensions: 16. 5 x 21. 75.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Height14 Inches
Length1 Inches
Width20 Inches
Part NumberRFG1420FBA
ModelCECOMINOD094909
WarrantyManufacturer

7. HVAC Premium

#ad

20" X 10 Steel Return Air Filter Grille for 1" Filter, Flat Stamped Face, Ceiling Recommended, Fixed Hinged, White Outer Dimensions: 22.5 X 12.5, HVAC Duct Cover

#ad
HVAC Premium #ad - 20" x 10 steel return air filter grille for 1" filter - fixed hinged - ceiling recommended - hvac duct cover - flat stamped Face - White Outer Dimensions: 22. 5 x 12.

5 - see below how to measure a grille. Quality packaging & satisfaction guaranteed- carefully shrink wrapped with solid cardboard backing to prevent damage in shipment - hand Inspected for Quality - 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Easy to use - our easy to use filter grille latch is powder-coated BEFORE Installation - And Requires No Screwdriver To Open After Installation, Just Open and Close Latches. Unrestricted airflow for your hvac system - noise Free Components - No Vibrating Louvers Etc. Click add to cart now and enjoy a new updated refreshing look to your home.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Height12.85 Inches
Length1.75 Inches
Width22.85 Inches
Part Number190 20X10
ModelCECOMINOD093080
WarrantyManufacturer

8. HVAC Premium

#ad

Removable Face/Door, 20" X 12" Steel Return Air Filter Grille for 1" Filter, Flat Stamped Face -White Outer Dimensions: 21.75w X 13.75h, HVAC Duct Cover

#ad
HVAC Premium #ad - Looks like It Was Just Waxed. Our filter grille latch is easy to Use On Your Fingers And Requires No Screwdriver To Open. High quality solid Stamped steel and No Sharp Edges. Powder-coat finish - smooth, Shiny, scratch-Resistant, Beautiful. Removable door/face for easy filter Change & Cleaning - Uses a 1" Thick Filter. Beautiful and Sturdy.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberRFG2012 FBA
ModelCECOMINOD093525
Warrantymanufacturer

9. HVAC Premium

#ad

Removable Face/Door, Flat Stamped Face -White Outer Dimensions: 13.75w X 21.75h, 12" X 20" Steel Return Air Filter Grille for 1" Filter, HVAC Duct Cover

#ad
HVAC Premium #ad - High quality solid Stamped steel and No Sharp Edges. Powder-coat finish - smooth, scratch-Resistant, Shiny, Beautiful. Beautiful and Sturdy. Our filter grille latch is easy to Use On Your Fingers And Requires No Screwdriver To Open. Looks like It Was Just Waxed. Removable door/face for easy filter Change & Cleaning - Uses a 1" Thick Filter.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberRFG1220
Warrantymanufacturer

10. HVAC Premium

#ad

White Outer Dimensions: 21.75"w X 21.75"h, 20"w X 20"h Steel Return Air Grilles, Sidewall and Ceiling, HVAC Duct Cover

#ad
HVAC Premium #ad - 20"w x 20"h is the size for the duct opening measurement only, actual front end outer dimensions are 21. 75" width X 21. 75" height - see below in description how to measure a gRILLE.

Looks like It Was Just Waxed. Heavy steel construction - no scuff powder coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Quality packaging - carefully shrink wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality. Unrestricted airflow for your hvac system - 50° angled to provide Maximum Airflow – ½ Inch Spaced Fins. High quality solid stamped steel construction with recessed Screw Holes SCREWS INCLUDED To Easily Install On Ceiling Or Sidewall.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Weight5.07 Pounds
Part NumberMFRG2020W
Warrantymanufacturer