#ad
#ad
Pentair Industries P5 #ad - The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

Water filters are used in a wide range of applications, swimming pools, and irrigation, including drinking water purification, industrial processes, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. Reduces sand, silt, and rust particles in residential, commercial, scale, and municipal drinking water.

Pentek P5 Spun Polypropylene Filter Cartridge, 9-3/4" x 2-3/8", 5 Microns #ad - Nominal filtration rating of 5 microns. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Spun polypropylene for resistance to chemicals and bacteria. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria.

Initial pressure drop of 02 psi at a flow rate of 5 gpm. Temperature range of 40 to 145 degrees F 4. 4 to 62.

More information about Pentair Industries P5 #ad

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns

#ad
#ad
Pentair Industries EPM-10 #ad - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. This cartridge is made of bonded powdered activated carbon PAC filter media wrapped in polyolefin with polyethylene outer netting. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Initial pressure drop of 1.

5 psi at a flow rate of 1 gpm. The nitrile butadiene rubber Buna-N gaskets seal the cartridge against the housing sold separately. The filter will reduce free available chlorine FAC at 2 parts per million ppm by at least 90% in up to 3, 000 gallons at a flow rate of 1 gallon per minute gpm. It has a nominal 85% filtration rating of 10 microns.

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns #ad - The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

Water filters are used in a wide range of applications, swimming pools, industrial processes, including drinking water purification, and irrigation, among others.

More information about Pentair Industries EPM-10 #ad


Similar products



Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

#ad
#ad
Pentair Industries CBC-10 #ad - The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Water filters are used in a wide range of applications, and irrigation, industrial processes, including drinking water purification, swimming pools, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm.

Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron #ad - This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is for purification of residential and commercial drinking water. SpecificationsNominal filtration rating05 microninitial pressure drop at 2 gpm3.

7 psiremoval of protozoan cysts99. 95%chlorine reduction capacity20, 000 gallons at 2 gpmTemperature range40 to 180 degrees F 4. 4 to 82.

More information about Pentair Industries CBC-10 #ad


Similar products



Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8"

#ad
#ad
Pentair Industries GAC-10 #ad - Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Nominal filtration rating of 10 microns. The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Bonded pac media with polyolefin wraps and polyethylene netting.

The pentek-gac-10 cartridge provides effective reduction of chlorine and bad taste and odor from your drinking water. Nominal filtration rating of 05 micron. Designed for maximum adsorption with post-filter to reduce carbon fines. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8" #ad - Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 1.

More information about Pentair Industries GAC-10 #ad


Similar products



Pentek CC-10 Coconut Carbon Filter Cartridge, 9-3/4" x 2-7/8", 20 Micron

#ad
#ad
Pentair Industries CC-10 #ad - The media is enclosed in a polystyrene outer casing and end caps, and there is a spun propylene post-filter to reduce carbon fines and other suspended particles. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. It will reduce free available chlorine fac at 2 parts per million ppm by at least 75% in up to 7500 gallons at a flow rate of 1 gallon per minute gpm.

Pentek CC-10 Coconut Carbon Filter Cartridge, 9-3/4" x 2-7/8", 20 Micron #ad - Initial pressure drop of 4. 5 psi at a flow rate of 1 gpm. Granular activated carbon GAC media with polystyrene outer casing and end caps. Nominal filtration rating of 05 micron. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings.

More information about Pentair Industries CC-10 #ad


Similar products



Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 5 Microns

#ad
#ad
Pentair Industries 1/2" 3G Slim Line BSP #ad - Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Designed for maximum adsorption with post-filter to reduce carbon fines. The cartridge has an initial pressure drop of 3. 4 pounds per square inch psi at a flow rate of 1 gallon per minute gpm, and operates over a temperature range of 40 to 180 degrees F 4.

4 to 82. 2 degrees C. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 5 Microns #ad - SpecificationsNominal filtration rating5 micronsInitial pressure drop at 1 gpm3. 4 psichlorine reduction capacity6, 000 gallons at 1 gpmTemperature range40 to 180 degrees F 4. 4 to 82. 2 degrees cmaximum dimensions h x w9-3/4 x 2-7/8 inches 248 x 73 mmMaterials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.

Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Bonded pac media with polyolefin wraps and polyethylene netting. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

More information about Pentair Industries 1/2" 3G Slim Line BSP #ad


Similar products



Pentek P5 155014-43 Sediment Water Filters 9-3/4" x 2-3/8"-- Package Of 6

#ad
#ad
Pentek Pentek 155014-43, P5 #ad - Nominal filtration rating of 5 microns. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack. The coreless strength of the cartridges is achieved by sintering the many fibers into a solid matrix. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. P1 9-3/4" × 2-3/8" 1 µm 06 psid @ 5. 0 gpm reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

Pentek P5 155014-43 Sediment Water Filters 9-3/4" x 2-3/8"-- Package Of 6 #ad - Granular activated carbon GAC media with polystyrene outer casing and end caps. P series cartridges are designed for purity. Nominal filtration rating of 10 microns. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm.

More information about Pentek Pentek 155014-43, P5 #ad


Similar products



Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron

#ad
#ad
Pentair Industries C1 #ad - Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. This filter cartridge meets national sanitation foundation/american National Standards Institute NSF/ANSI standard 42 for quality assurance, and film processing, and is for use in various applications, laboratory water treatment, including drinking water purification, among others .

Specifications nominal filtration rating 5 microns Chlorine reduction capacity 2500 gallons at 1 gpm Initial pressure drop at 5 gpm 4 psi Operating temperature range 40 to 125 degrees F 4. 4 to 51. 7 degrees c maximum dimensions h x w 9-3/4 x 2-1/2 inches 248 x 64 mm Materials certification NSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.

Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron #ad - The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity. Initial pressure drop of 4 psi at a flow rate of 5 gpm.

Reduces chlorine taste and odor, MTBE, VOCs, and sediment in residential and commercial drinking water. Nominal filtration rating of 20 microns. Nominal filtration rating of 5 microns. Designed for maximum adsorption with post-filter to reduce carbon fines.

More information about Pentair Industries C1 #ad


Similar products



Desal DESAL-TFM-50 Reverse Osmosis Membrane

#ad
#ad
GE Osmonics DESAL-TFM-50 #ad - Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. 50 gallons per day--plenty of great RO water for your home. Nominal filtration rating of 5 microns. Reduces chlorine taste and odor, MTBE, VOCs, and sediment in residential and commercial drinking water. Nominal filtration rating of 20 microns. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity. Ansi/nsf 58 listed for performance. Reverse osmosis technology reduces lead, chromium, mercury, nitrates and many more contaminants.6-pack of pentek 155014-43, p5 9-3/4" x 2-3/8" 5 micron Sediment Melt Blown Filters Cartridges Spun Polypropylene.

Desal DESAL-TFM-50 Reverse Osmosis Membrane #ad - Initial pressure drop of 4. 5 psi at a flow rate of 1 gpm. Thin-film membrane, a standard in reverse osmosis technology. Initial pressure drop of 3. 4 psi at a flow rate of 1 gpm. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm.

More information about GE Osmonics DESAL-TFM-50 #ad


Similar products



Pentek CBR2-10 Carbon Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

#ad
#ad
Pentair Industries CBR2-10 #ad - 6-pack of pentek 155014-43, p5 9-3/4" x 2-3/8" 5 micron Sediment Melt Blown Filters Cartridges Spun Polypropylene. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems.

Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Materials tested and certified by NSF International to NSF/ANSI Standard 43. It has a nominal 85% filtration rating of 05 micron, and 99.

95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine fac at 2 parts per million ppm by at least 75% in up to 20, 000 gallons at a flow rate of 1 gallon per minute gpm. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity.

Pentek CBR2-10 Carbon Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron #ad - Impurities captured on the membrane are constantly swept away, so the surface is continuously cleaned--reducing maintenance costs. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

More information about Pentair Industries CBR2-10 #ad


Similar products



KX Matrikx 32-250-125-975 Chlorine Taste and Odor Filter Cartridge, 10-Inch

#ad
#ad
KX Matrikx 32-250-125-975 #ad - Reduces protozoan cysts, mercury, lead, MTBE, chlorine taste and odor, VOCs, and fine sediment in residential water. Nominal filtration rating of 05 micron and 99. 95% reduction of cysts. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Nominal filtration rating of 0

5 micron. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Thin-film membrane, a standard in reverse osmosis technology.

KX Matrikx 32-250-125-975 Chlorine Taste and Odor Filter Cartridge, 10-Inch #ad - Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 15 psi at a flow rate of 1 gpm. 6-pack of pentek 155014-43, p5 9-3/4" x 2-3/8" 5 micron Sediment Melt Blown Filters Cartridges Spun Polypropylene. Bonded pac filter media wrapped in a polyolefin pre-filter. Matrikx cto filters are the most widely used carbon block devices in the world and provide previously unattainable performance.

More information about KX Matrikx 32-250-125-975 #ad


Similar products