#ad
#ad
Pentair Industries 1/4"#5 CL & BL WO/PR #ad - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the maximum flow rate, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

Water filters are used in a wide range of applications, swimming pools, and irrigation, industrial processes, including drinking water purification, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. This filter housing is for use in various applications, food service, including residential drinking water filtration, and humidifying systems, among others.

Pentek 158133 1/4" #5 Slim Line Clear Filter Housing #ad - Specifications filter cartridge size H x W sold separately 5 x 2-1/2 inches 127 x 63. 5 mm initial pressure drop at 3 gpm 2 psi Maximum temperature 125 degrees F 51. 7 degrees c maximum pressure 125 psi maximum dimensions h x w 7-3/8 x 4-5/8 inches 187 x 118 mmH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes.

More information about Pentair Industries 1/4"#5 CL & BL WO/PR #ad

Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron

#ad
#ad
Pentair Industries C2 #ad - Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 50%. H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron #ad - Nominal filtration rating of 5 microns. Initial pressure drop of 2 psi at a flow rate of 2 gpm. The filter will reduce free available chlorine FAC at 2 parts per million ppm by at least 75% in up to 1, 250 gallons at a flow rate of 05 gallons per minute gpm. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

This filter cartridge is for use in residential drinking water purification. Specifications nominal filtration rating 5 microns Initial pressure drop at 2 gpm 2 psi Chlorine reduction capacity 1, 250 gallons at 05 gpm operating temperature range 40 to 125 degrees F 4.

More information about Pentair Industries C2 #ad


Similar products



Pentek 158110 3/8" #5 Slim Line Clear Filter Housing

#ad
#ad
Pentair Industries 3/8"#5 CL & BL W/PR 12/ #ad - Maximum temperature of 125 degrees F 51. 7 degrees C. Reduces fine sediment and chlorine taste and odor in residential drinking water. This pentek 158110 3/8" #5 slim line clear filter housing is suitable for low-flow applications that have space restrictions. The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the maximum flow rate, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

Water filters are used in a wide range of applications, and irrigation, industrial processes, swimming pools, including drinking water purification, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The sump is made of clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals.

Pentek 158110 3/8" #5 Slim Line Clear Filter Housing #ad - They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength.

For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Temperature range of 40 to 125 degrees F 4. 4 to 51.

More information about Pentair Industries 3/8"#5 CL & BL W/PR 12/ #ad


Similar products



Hydronix SDC-25-0501 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 1 Micron

#ad
#ad
Hydronix SDC-25-0501 #ad - Reduces fine sediment and chlorine taste and odor in residential drinking water. Initial pressure drop of 2 psi at a flow rate of 5 gpm. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Water filters are used in a wide range of applications, including drinking water purification, and irrigation, industrial processes, swimming pools, among others.

Hydronix water technology is a supplier of water filtration, purification and separation products. Maximum temperature of 125 degrees F 51. 7 degrees C. Particle retention size of 1 micron. Nominal filtration rating of 5 microns. Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable.

Hydronix SDC-25-0501 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 1 Micron #ad - Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Initial pressure drop of 2 psi at a flow rate of 2 gpm. It is made of polypropylene which can be sterilized, has dimensional stability, and is resistance to most chemicals. Sediment filter for a water filtration system.

For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

More information about Hydronix SDC-25-0501 #ad


Similar products



Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F

#ad
#ad
Pentek CBC-5 #ad - Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. Nominal filtration rating of 5 microns. Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable. The pentek cbc-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

Reduces fine sediment and chlorine taste and odor in residential drinking water. Filtration Rating: 05 micron. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength.

Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F #ad - Slim filter housing for low-flow applications with space restrictions. Temperature range: 40 to 180 degrees F. The product is rated to. 5 microns, has a flowrate of 2 gallons per minute and meets NSF/ANSI standard 42 for purification of commercial and residential water. Maximum temperature of 125 degrees F 51.

More information about Pentek CBC-5 #ad


Similar products



Pentek P5-478 Spun Polypropylene Filter Cartridge, 4-7/8" x 2-3/8", 5 Microns

#ad
#ad
Pentair Industries P5-478 #ad - Temperature range: 40 to 180 degrees F. 2. 5" od and an overall length of 4-7/8". Slim filter housing for low-flow applications with space restrictions. It has an initial pressure drop of 03 pound per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4.

4 to 62. 8 degrees C. Reduces sand, and rust particles in residential, commercial, scale, silt, and municipal drinking water. Nominal filtration rating of 5 microns. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Initial pressure drop of 2 psi at a flow rate of 5 gpm. Particle retention size of 1 micron.

Pentek P5-478 Spun Polypropylene Filter Cartridge, 4-7/8" x 2-3/8", 5 Microns #ad - This spun polypropylene filter cartridge is used for treatment of residential, commercial, and municipal drinking water. SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm03 psitemperature range40 to 145 degrees F 4. 4 to 62. 8 degrees cmaximum dimensions h x w4-7/8 x 2-3/8 inches 124 x 60 mmThe nominal filtration rating is for a particle removal efficiency of 85%.

More information about Pentair Industries P5-478 #ad


Similar products



Hydronix SDC-25-0505 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 5 Micron

#ad
#ad
Hydronix HYDRONIX-SDC-25-0505-2PK #ad - Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Sediment depth cartridge technology - 5 micron. Capacity: 20, 000 gallons at 2 gpm. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Particle retention size of 1 micron. Temperature range: 40 to 180 degrees F.

Hydronix SDC-25-0505 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 5 Micron #ad - Pure 100% polypropylene fibers. Stock up on the sediment filters your system needs by ordering SDC-25-0505 Hydronix water filter cartridges from us today! Reduces fine sediment and chlorine taste and odor in residential drinking water. Slim filter housing for low-flow applications with space restrictions.

2. 5" x 5" fits most 5 inch housings. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable. 2. 5" od and an overall length of 4-7/8". Maximum temperature of 125 degrees F 51.

More information about Hydronix HYDRONIX-SDC-25-0505-2PK #ad


Similar products



Watts Premier 560100 5-Inch Filter, 2-Pack

#ad
#ad
Watts Premier 560100 #ad - 2. 5" x 5" fits most 5 inch housings. Temperature range: 40 to 180 degrees F. 2. 5" od and an overall length of 4-7/8". 4-7/8-inch long by 2. 5-inch wide. Nominal filtration rating of 5 microns. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Sediment depth cartridge technology - 5 micron. Sediment filter for a water filtration system.

5 micron coconut shell carbon for excellent sediment, chlorine taste and odor reduction. High dirt holding capacity. Capacity: 20, 000 gallons at 2 gpm. Product demensions: 9-3/4 x 2-7/8" 248 x 73 mm. Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable. Brand name: watts *sub brand: premier 2 pack *product type: replacement water filter *packaging type: shrinkwrap *Brand Compatibility: Culligan C2, Ametek C2, Pentek C2, US Filter C2 *Placement: RV *Filtration Method: Carbon *Color Family: White Reduces fine sediment and chlorine taste and odor in residential drinking water.

Watts Premier 560100 5-Inch Filter, 2-Pack #ad - Nsf/ansi standard 42 certified. Initial pressure drop of 2 psi at a flow rate of 2 gpm. Made of NSF certified material. Maximum temperature of 125 degrees F 51.

More information about Watts Premier 560100 #ad


Similar products



Pentek 244047 Mounting Bracket Kit for 1/4", 3/8" and 1/2" Housings

#ad
#ad
Pentek 244047 #ad - 2. 5" x 5" fits most 5 inch housings. Nominal filtration rating of 5 microns. Reduces sand, commercial, scale, and rust particles in residential, silt, and municipal drinking water. Nominal filtration rating of 5 microns. Temperature range: 40 to 180 degrees F. Made of NSF certified material. Spun polypropylene for resistance to chemicals and bacteria.

Pentek 244047 Mounting Bracket Kit for 1/4", 3/8" and 1/2" Housings #ad - Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. 2. 5" od and an overall length of 4-7/8". 4-7/8-inch long by 2. 5-inch wide. Replace every 3 to 6 months. Maximum temperature of 125 degrees F 51. 7 degrees C. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength.

Capacity: 20, 000 gallons at 2 gpm.

More information about Pentek 244047 #ad


Similar products



Pentek 150539 SW-1 Wrench for Slim Line Housings

#ad
#ad
Pentair Industries 150539 #ad - The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Nominal filtration rating of 5 microns. This wrench fits the sumps of pentek slim Line filter housings, which are used in a wide variety of applications, irrigation, including drinking water purification, and industrial processes, among others. Water filters remove undesirable particles, and microorganisms from water by means of a semipermeable barrier, chemicals, adsorption, or biological processes.

Pentek 150539 SW-1 Wrench for Slim Line Housings #ad - Initial pressure drop of 2 psi at a flow rate of 5 gpm. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Fits pentek Slim Line housing sumps. High dirt holding capacity. 2. 5" x 5" fits most 5 inch housings. The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

More information about Pentair Industries 150539 #ad


Similar products



Pentek R30-478 Pleated Polyester Filter Cartridge, 4-7/8" x 2-5/8", 30 Microns

#ad
#ad
Pentair Industries R30-478 #ad - This pentek r30-478 pleated polyester filter cartridge reduces sand, rust, dirt, silt, and scale particles in residential and commercial water. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. This pleated polyester filter cartridge is for use in various applications, irrigation, including drinking water purification, and industrial processes, among others.

Specificationsnominal filtration rating30 micronsInitial pressure drop at 10 gpm. It has a nominal filtration rating of 30 microns at an efficiency of 85%. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4.

Pentek R30-478 Pleated Polyester Filter Cartridge, 4-7/8" x 2-5/8", 30 Microns #ad - 4 to 51. 7 degrees C.

More information about Pentair Industries R30-478 #ad


Similar products