#ad
#ad
Blue Sea Systems 2314 #ad - Max voltage: 300v aC/ 48V DC. 2 mounting holes accept #10 M5 screws. 100a mini busbar with 5 screws and a cover. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity, cover made with clear polycarbonate. Continuous rating: 100A AC/DC. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

More information about Blue Sea Systems 2314 #ad

12 Circuits with Negative Bus & Cover - Blue Sea Systems ST Blade Fuse Block

#ad
#ad
Blue Seas 5026 #ad - Positive distribution bus with #10-32 stud. Accepts ato and ATC fast acting blade fuses. St blade fuse block - 12 circuits with negative bus and cover. Can be used for 24-hour circuits. Fuse block, mfg# 5026, w/negative bus and cover, atc/ato, 12 circuit, 32VDC max W/30Amp max per circuit & 100Amp per block.

3. 32"w x 6. 5"h x 1. 52"d. Fuses sold separately. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

More information about Blue Seas 5026 #ad


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG

#ad
#ad
Ancor Marine Grade Products 18-5070 #ad - Premium vinyl insulation resists saltwater, oil, battery acid, gasoline & ultra-violet radiation. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Tinned-copper stranding. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Rated at 600 volts & 106c, the heavy-duty insulation is resistant to heat & abrasion. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Maximum protection against corrosion & electrolysis. St blade fuse block - 12 circuits with negative bus and cover. Accepts ato and ATC fast acting blade fuses.

Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG #ad - They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, 105 deg C dry and 75 deg C wet, oil, heat, abrasion and ultra-violet radiation. Exceeds all ul 1426, uscg charter boat CFR title 46 & ABYC standards.

Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. Ultra flexible Type 3 stranding resists fatigue due to vibration & flexing.

More information about Ancor Marine Grade Products 18-5070 #ad


Similar products



Blue Sea Systems e-Series On/Off Battery Switch

#ad
#ad
Acr Electronics 915 #ad - Continuous rating: 350A, Maximum voltage: 48V DC. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Ip66 waterproof, iso 8846 and meets ABYC requirements. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Terminal stud size: 3/8" - 16. Accepts ato and ATC fast acting blade fuses. Positive distribution bus with #10-32 stud. They are constructed with premium vinyl insulation that is rated at 600 volts, battery acid, gasoline, 105 deg C dry and 75 deg C wet, oil, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

Blue Sea Systems e-Series On/Off Battery Switch #ad - Single circuit on-off. E series battery switch, mfg# 9003E, Red, 350A control.600a int. 48vdc. Can be used for 24-hour circuits. St blade fuse block - 12 circuits with negative bus and cover. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Switches a single battery to a single load group.

More information about Acr Electronics 915 #ad


Similar products



SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
#ad
SELTERM #ad - Can be used for 24-hour circuits. Terminal stud size: 3/8" - 16. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Heavy duty construction for Enhanced High Temperature Durability. Lugs are suitable for use with Welding Cables and Battery Cables. Positive distribution bus with #10-32 stud.

Ip66 waterproof, iso 8846 and meets ABYC requirements. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Can be Crimped or Soldered. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. St blade fuse block - 12 circuits with negative bus and cover. Continuous rating: 350A, Maximum voltage: 48V DC. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard.

More information about SELTERM #ad


Similar products



Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red

#ad
#ad
Acr Electronics 6006 #ad - Positions: single-circuit On-Off. Single circuit on-off. Ignition protected-safe for installation aboard gasoline powered boats. With removable knob. Switches a single battery to a single load group. They are constructed with premium vinyl insulation that is rated at 600 volts, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, 105 deg C dry and 75 deg C wet, gasoline, heat, abrasion and ultra-violet radiation.

Single circuit on-off. Continuous rating: 300A, Maximum Voltage: 48V DC. St blade fuse block - 12 circuits with negative bus and cover. Terminal stud size: 3/8" - 16. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards.

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red #ad - Can be used for 24-hour circuits. Switches a single battery to a single load group. Accepts ato and ATC fast acting blade fuses. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ip66 waterproof, iso 8846 and meets ABYC requirements. Positive distribution bus with #10-32 stud.

More information about Acr Electronics 6006 #ad


Similar products



Ancor 311225 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals 16 to 14-Gauge, Size 8 Screw, 25-Pack

#ad
#ad
Ancor 311225 #ad - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Make before break contact design allows switching between battery banks without power interruption. Positive distribution bus with #10-32 stud. Switches a single battery to a single load group. Continuous rating: 300A, Maximum Voltage: 48V DC.

They are constructed with premium vinyl insulation that is rated at 600 volts, battery acid, oil, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, heat, abrasion and ultra-violet radiation. Single circuit on-off. General purpose wire and components designed for on shore applications caused significant problems as electrical systems became more sophisticated and demanding.

Ancor 311225 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals 16 to 14-Gauge, Size 8 Screw, 25-Pack #ad - Ancor marine grade products quickly became the system of choice as the first major supplier of UL listed products designed for the harsh marine environment. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Ul listed and CSA recognized. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

St blade fuse block - 12 circuits with negative bus and cover. Ancor was founded over twenty years ago to solve electrical problems experienced by mariners as they ventured offshore in large numbers.

More information about Ancor 311225 #ad


Similar products



BEP 701 Battery Switches - On-Off

#ad
#ad
BEP 5965 #ad - All bep switches are tested Independently to this specification by a 3rd party laboratory. Continuous rating: 350A, Maximum voltage: 48V DC. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

They are constructed with premium vinyl insulation that is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, oil, battery acid, heat, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation. Single circuit on-off. Switches a single battery to a single load group.

BEP 701 Battery Switches - On-Off #ad - Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Heavy duty construction for Enhanced High Temperature Durability. This switch offers a number of unique features, allowing it to be a stand alone unit, the highlight being the patented Contour Locking System, or locked together with other switches.

Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Operation: on/off, 455a dc intermittent 5 min, 1250a dc cranking 10 sec, rating: 275a dc continuous 1hr, voltage: 48v dc, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Can be Crimped or Soldered.

More information about BEP 5965 #ad


Similar products



Fuse Relay Box for Automotive and Marine Use - ONLINE LED STORE 12-Slot Relay Box 6 Relays 6 Blade Fuses Bosch Style Relays Easy Installation OEM Factory Look

#ad
#ad
ONLINE LED STORE #ad - Operation: on/off, 455a dc intermittent 5 min, voltage: 48v dc, rating: 275a dc continuous 1hr, 1250A DC Cranking 10 sec, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. To enable trouble-free mounting on these surfaces, we engineered our relay block with uneven mounting supports.

Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Ignition protected. Supports relays & fuses- safely stores up to 5x bosch style 40/30a 5-pin relays/30a 4-pin relays compatible with 025" pins, 1x rtt7121a 4-pin relay, and 6x ATO/ATC Blade Fuses.

Installation is a snap- the snap-fit upper and lower cover cases allow easy access for relays, fuses, and wires. Accessories included- metallic pins are included so you can effortlessly swap out relays and fuses from the back of the fuse relay box. Versatile mounting options- since most modern vehicles have angular/sloping engine bays or trunk areas, we engineered the mounting legs to snugly adhere to these surfaces; a rubber spacer is also included so you can mount the automotive relay box on flat surfaces too.

Fuse Relay Box for Automotive and Marine Use - ONLINE LED STORE 12-Slot Relay Box 6 Relays 6 Blade Fuses Bosch Style Relays Easy Installation OEM Factory Look #ad - Oem-style protection- tidy up your vehicle's engine bay by securely stowing away your relays and fuses in this sturdy relay box for a clean factory look backed by unbeatable protection. Ignition protected-safe for installation aboard gasoline powered boats. Switches a single battery to a single load group.

More information about ONLINE LED STORE #ad


Similar products



Blue Sea Systems 5183 100A Fuse Terminal

#ad
#ad
Acr Electronics 5183 #ad - Single circuit on-off. Can be used for 24-hour circuits. Positive distribution bus with #10-32 stud. Heavy duty construction for Enhanced High Temperature Durability. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ignition protected-safe for installation aboard gasoline powered boats. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

Heat activated adhesive built into the sleeve of the heat shrink tubing. Ul listed and CSA recognized. Terminal stud size: 3/8" - 16. Ignition protected-safe for installation aboard gasoline powered boats. Ul tested & Approved. Ip66 - protected against powerful water jets. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Blue Sea Systems 5183 100A Fuse Terminal #ad - 8 screw, 16-14 awg, 25 pack of Heat Shrink Ring Terminals. Terminal fusecolor: yellowamperage: 100ainterrupt rating satisfies abyc requirements for DC Main circuit protection on large battery banks Ignition protected-safe for installation aboard gasoline powered boatsClear window-visual indication of blown conditionMust be used with terminal fuse block St blade fuse block - 12 circuits with negative bus and cover.

Make before break contact design allows switching between battery banks without power interruption. Switches a single battery to a single load group.

More information about Acr Electronics 5183 #ad


Similar products



6 Gang Waterproof Rocker Switch Panel Blue LED Digital Display Voltmeter Dual 5V USB Charger Socket DC 12V Slot, 5 Pin Lighting Toggle Switches with 15A Fuse for RV Truck Car Marine Boat Vehicle

#ad
#ad
Genuine Marine #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Ip66 - protected against powerful water jets. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Continuous rating: 300A, Maximum Voltage: 48V DC. Ignition protected-safe for installation aboard gasoline powered boats.

Can be Crimped or Soldered. Can be used for 24-hour circuits. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. Control knob can be removed by switching to counter-clockwise 45° position. Ignition protected. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

6 Gang Waterproof Rocker Switch Panel Blue LED Digital Display Voltmeter Dual 5V USB Charger Socket DC 12V Slot, 5 Pin Lighting Toggle Switches with 15A Fuse for RV Truck Car Marine Boat Vehicle #ad - 8 screw, 16-14 awg, 25 pack of Heat Shrink Ring Terminals. Visible indication of blown condition. Accepts ato and ATC fast acting blade fuses. Single circuit on-off. Heavy duty construction for Enhanced High Temperature Durability. Rocker switch panel and the slot waterproof hat, such as marine, rubber sealed cap make it watertight❷two 5v usb ports are sufficient to meet power charge demand❸Digital voltage display helps user to monitor machine electrical safety❹Universally fit for both 12V and 24V vehicles, boat, caravan, bus❺Easily Installed by its pre-wired wiring harness❻Can be DIY to control any vehicle electrical appliance  Specification:● Certificate: CE Approved● Rating: 12V/24V● LED Color: Blue● Fuse: 1.

More information about Genuine Marine #ad


Similar products